Chainring for dual use: road or triathlon, against the clock ... CNCd aluminiumMaterial: aluminium 7075 T6,Spacing: 130mm,Outer: 50-56 teeth,Compatibility: 10/11 speeds,Colour plate: matt black.
X112 and X145 chainringsDesigned to be perfectly Compatible with 2015 Campagnolo 11x 4 arm Chorus, Record and Super Record carbon chainsets.Matches Campagnolo's shifting ramps and pins, generally speaking, for optimal gear shifting, it is strongly advised to replace all chainrings with Specialites T.ACompletely CNC machined, very light and stiff.112mm BCD - Al 7075 T6 - 4 hole - Inner145mm BCD - Al 7075 T6 - 4 hole - Outer
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.Nerius for Campag 11x only, can convert Some Campag Carbon 10x chainsets to 11x.,Can be fitted to Super Record, Record, Chorus, Athena and Centaur chainsets.,Weights: 34T 29g to 50T 78g.
Chainring specially designed to meet the needs of a 1x10 - 1x11 or 1x12 MTB single chainrings.The special narrow/wide tooth shape enables the chain to stay in place without the use of a chain guideKey Features:Compatible with either 10x, 11x or 12x derailleurs.,Material : 7075 T6 aluminium,PCD: 104mm,Sizes: 32,34,36,38,Colour: Black.
For Sram XX, X0, X9, X7 doubleThese chainrings are compatible with range of double MTB chainsets SRAM 10 speed of 2010 (XX) and 2011 (XX, X0, X9, X7).Made of high quality 7075 T6 aluminium for a maximum strength.Key Features:Inner sizes : 26, 28 and 30 teeth with 80mm PCD.,Outer sizes : 38, 40, 42 and 44 teeth with 120mm PCD.,Threaded outer chainrings for fitting without nuts.,Lighter than originals.,Colour : Matt black,Weight for the kit 26/40 teeth 91g, kit 28/42 teeth 108g.
The quality of gear shifting is very high, thanks to ramps added on the outer chainring.CNC machined chainrings compatible with 10 or 11 speed MTB.Key Features:Material: 7075 T6 aluminium,Inner: 64pcd,Middle: 104pcd,Outer: 104pcd 18/23mm wide arm,Colour : Black,Weight : 65g (Outer 42t).Please note there are two widths of arm available 18mm and 23mm. This is measured where the arm of the chainring meets the arm of the spider, just below the bolt holes.
The Solano is compatible with Centuar carbon/Veloce/Mirage compact Ultra-Torque cranks. CNC machined. The 5th arm is slightly offset for crank fixing. The 5th bolt hole has no recess for a bolt head as this bolts straight into back of crank.Key Features:Material : 7075 T6 Aluminium,Outers : 46, 48, 50, 52, 53T,Inners : 34, 36, 38, 39, 42T,PCD : 110 pcd Campagnolo offset arm,Colours : Black,Weight : 74g (48T).
94pcd 5 arm 9x chainringsTA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by many chainring manufacturers.
The Chinook 104 range was changed in 2008 to cater for far reaching technical gear system developments. The new generation middle rings have two pairs of shortened teeth to assist down-shifting.Key Features:PCD: 104mm.,Compatible 9 speed,Colours : Silver or black.,Material : AL 7075 T6.
100% compatibility with 10/11 speed transmissionsMaterial: aluminium 7075 T6,Compatibility: 10/11 speed,Spacing: 110 mm,Interior: 34, 36, 38 teeth,Exterior: 46, 48, 50, 52 teeth.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.Suitable for 9/10x chainsets.Note: Images are for display purposes only
Shimano and Campagnolo track. For 1/8" (3.17mm) track chain.Key Features:Material : 7075 T6 aluminium.,PCD : 144mm.,Sizes : 44 to 52 teeth.,Colour : silver..
The Chinook 104 range was changed to cater for far reaching technical gear system developments. The new generation middle rings have two pairs of shortened teeth to assist down-shifting.Key Features:PCD : 58/104mm.,Compatible 8/9 speed,middle : 32, 34, 36, 38, 40, 42T,Colours : Silver or black.,Material : AL 7075 T6.
Nerius outers are compatible with Campagnolo carbon compact square taper and Record carbon/Chorus carbon/Centuar alloy compact Ultra-Torque cranks. Nerius inners are for all compact Ultra-Torque cranks.CNC machined. The 5th arm is slightly offset for crank fixing. The 5th bolt hole has no recess for a bolt head as this bolts straight into back of crank.Outers : 48, 49, 50, 51, 52, 53TInners : 34, 36, 38, 39, 42TPCD : 110 pcd Campagnolo offset armColours : Silver and BlackMaterial : AL 7075 T6Weights : 34T 27g, 48T 74g
Evolution of Hegoa range 100% compatibility with transmissions 10/11 speeds.Key Features:Material: aluminium 7075 T6,Compatibility: 10/11 speeds,Spacing: 130 mm,Inner: 38, 39 and 42 teeth,Outer: 50, 52 and 53 teeth,Colour: Black.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.Horus for Campag 11x only, can convert Campag Carbon 10x chainsets to 11x.,Can be fitted to Super Record, Record, Chorus, Athena and Centaur chainsets.,Weight: 50t 78g - 34t 29g.
Some sizes of Cyclotourist chainrings are only available to special order. If they are not held in stock, they will need to be produced by TA.Pro 5 vis chainrings, compatible with 8 speed transmissions maximum.Key Features:Material : 7075 T6 aluminiumColour : SilverPCD : 80mm
The C116 chainrings are compatible with Shimano XTR cranksets (from 2003 to 2006).These chainrings are the perfect replacement for the Shimano XTR M960 rings and are 25% lighter compared to the originals!The special PCD, only used on the M960 crank bolt pattern makes it difficult to find a replacement if the original rings are worn.For clean up-shifts 4 shift pins are attached to the inside of the 32t and 44t ring.Produced in the FranceTechnical data:Compatibility: only XTR M960,Material: aluminium 7075,Number of teeth: 22-32-44 teeth,PCD: 64mm, 102mm, 146mm,Speed: 8, 9, 10x,Colour: black, silver teeth.Individual Ring data:44t, PCD 146mm, 5mm thickness, 63g,32t, PCD 102mm, 5mm thickness, 34g,22t, PCD 64mm, 4mm thickness, 19g.
The Chinook range was changed to cater for far reaching technical gear system developments. The new generation middle rings have two pairs of shortened teeth to assist down-shifting.Key Features:Compatible 9 speed,Inner: 22, 24, 26, 28 ,30t,,Colours : Silver or black.,Material : AL 7075 T6,PCD : 64mm..
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.,For inner fitment on triple 110/130/135pcd.,For 8/9/10x chainsets..