The rotor contact surface on the Shimano RT76 model has been developed for excellent pad clearing and cooling which increases brake pad performance and life. The large forged alloy spider supports the rotor surface, increasing the rigidity and reducing the weight.
Shimano RT76 Disc Rotor (6 Bolt)Shimano developed this XT disc brake rotor to get the best performance from your brake, whilst also prolonging brake pad life. This is achieved thanks to its advanced pad contact surface, which aids pad clearance. It also offers a cooling effect on the pads and brake caliper, preventing the dreaded “brake-fade” towards the end of a long descent on the trails.Precision Cut Disc RotorPrecision cut from stainless steel, this disc rotor improves braking performance in muddy conditions whilst aiding cooling under high load. A large forged alloy spider on the Shimano XT RT76 6-Bolt Rotor supports its surface and works to decrease overall weight increase rigidity.Reasons to Buy: Get the best performance from your brake. Prolong your brake pad life. Reduced heat build up. Superior braking in muddy conditions.Features: Material: Stainless Steel and Forged Alloy Mount: 6-Bolt Compatibility: All Shimano MTB disc brakes (Deore, SLX, XT or XTR) Large forged alloy spider supports rotor surface, increasing rigidity and reducing weight Comes complete with mounting hardware Sold individually Weight: 138g (160mm)Manufacturer Reference Codes: 160mm: SMRT76S; 180mm: SMRT76M; 203mm: SMRT76LA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Delivering quiet and smooth shifting, Shimano's FD-M5100 11-Speed front derailleurs feature Shimano's new Side Swing technology. The new design offers enhanced cable routing, light action, and increases clearance for large wheels and short chain stays.Wide link design 11-speed Deore MTB front derailleurSide swing, side pull front derailleur decrease problems with tyre clearance and reduces cable frictionDesigned specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yetSide pull cable routingWide pivot link design for greater torsional rigidity improves shifting response and service lifeDirect frame fit for easy and accurate installation giving perfect alignment11-speed MTB drivetrain compatibilityReinforced steel chain guide offers high strength and rigidity for improved shifting responseFor double 38 tooth max chainringChainline both 48.8/51.8mm
Shimano s newly redesigned SLX M7000 11-Speed Shift Lever is a solid workhorse, with technology trickled down from Shimano s higher end groupsets the SLX M7000 comes in at a more affordable price point. Featuring Vivid Indexing and 2-Way Release, the SLX M7000 shift lever offers great performance no matter what the conditions, with a consistent and light feel at the shift paddles. Available for 11-speed front or rear derailleurs, the SLX M7000 Shift Lever is available in Shimano s I-Spec II and I-Spec B specifications for mounting to your chosen Shimano brake or a regular handlebar clamp. Exceptional value XC, Trail and Enduro 11 speed Rapidfire shifterVivid indexing gives consistent shifting2-Way release function allows you to shift down a gear with finger or thumbFor use with Shimano 11-speed MTB Derailleurs onlyBarrel adjuster for gear tuningHandlebar clamp version has removable gear displayComplete with inner and out gear cables
Wide link design 105 double front derailleur for increased rigidity and improved shifting response Wide inner link increased rigidity and takes front shifting performance to a new level, especially under heavy load For 11-speed drivetrains Toggle link design is light action with short lever movement and less effort at the end of shifting stroke Designed to work with the wider gear pitch spacing Shimano chainsets without sacrificing shifting performance on bikes with 135 / 142 mm O.L.D. Support bolt provides added stability Maximum capacity of 16 teeth with 46-53 tooth outer The aluminium parts are coated to resist corrosion and maintain their great looks
Wide link design 105 double front derailleur for increased rigidity and improved shifting response Wide inner link increased rigidity and takes front shifting performance to a new level, especially under heavy load For 11-speed drivetrains Toggle link design is light action with short lever movement and less effort at the end of shifting stroke Designed to work with the wider gear pitch spacing Shimano chainsets without sacrificing shifting performance on bikes with 135 / 142 mm O.L.D. Support bolt provides added stability Maximum capacity of 16 teeth with 46-53 tooth outer The aluminium parts are coated to resist corrosion and maintain their great looks
Bradley Wiggins rocketed to victory in the 2012 Tour de France powered by revolutionary 11-speed Dura-Ace. Now you too can own this cutting edge technology. Now available in Press Fit compatibility, the Dura-Ace bottom bracket features outside positioned bearings for better weight distribution and more stability. Key Features: Complete press-fit bottom bracket assembly for Shimano HollowTech II road cranks. Cups are made from fibre reinforced polymer material which reduces the risk of frame noise and damage. Set includes left and right hand cups, inner cover, and inner O-rings. Sealed cups keep out dirt and water. Maintenance free. Compatible with 86.5 mm shells. 41 mm cup diameter. Easy press-fit installation.
Key Features:Deore M6100 12-speed Hyperglide+ chain for smooth shifts and maximum durability,Shimano 12-speed Hyperglide+ chains have computer designed plate profiles to operate seamlessly with Shimano DCE 12-speed chainrings and cassette sprockets, resulting in 1/3 faster shift time than Hyperglide systems even under load,Outer plate design has been developed to reduce the chance of chain suck,For use with 12-speed HG+ drivetrains,Comes complete with Quick Link which enables fast tool free chain assembly.
Shimano Deore M6000 10 Speed MTB Trigger ShifterEnjoy smooth and reliable shifting performance with the Deore M6000 10 Speed Trigger Shifter. Designed for use with mountain bikes (MTB), this trigger shifter enables you to shift your riding position with ease, thanks to the 2-way release feature. Suitable for use with Dyna-Sys 10 Speed components, this Deore M6000 shifter offers an unrivalled performance that won't let you down. Features: Ergonomic lever shape and easy lever access 2-way release allows shifting from various riding positions, upper lever swings in either direction for thumb or index finger use Vivid indexing provides a constant amount of shift lever force across all 10 sprockets Pod design allows the use of these shifters with any brake lever I-spec-II version is developed to attach directly to I-spec-II brake levers Front shifter has a mode converter for double/triple use Easy to read optical gear display Barrel adjuster for fine gear tuning Includes Optislick inner cables but not outer cable Easy access clamp band adjustment for quick set upUse: Mountain Bike (MTB)Speed: 10 SpeedShifters: Shimano DeoreCompatibility: Dyna-Sys10-Speed Part No: SL-M6000-RA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Deore M6000 10 Speed MTB Trigger ShifterEnjoy smooth and reliable shifting performance with the Deore M6000 10 Speed Trigger Shifter. Designed for use with mountain bikes (MTB), this trigger shifter enables you to shift your riding position with ease, thanks to the 2-way release feature. Suitable for use with Dyna-Sys 10 Speed components, this Deore M6000 shifter offers an unrivalled performance that won't let you down. Features: Ergonomic lever shape and easy lever access 2-way release allows shifting from various riding positions, upper lever swings in either direction for thumb or index finger use Vivid indexing provides a constant amount of shift lever force across all 10 sprockets Pod design allows the use of these shifters with any brake lever I-spec-II version is developed to attach directly to I-spec-II brake levers Front shifter has a mode converter for double/triple use Easy to read optical gear display Barrel adjuster for fine gear tuning Includes Optislick inner cables but not outer cable Easy access clamp band adjustment for quick set upUse: Mountain Bike (MTB)Speed: 10 SpeedShifters: Shimano DeoreCompatibility: Dyna-Sys10-Speed Part No: SL-M6000-RA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
With quick lever access and a light and responsive lever action, Shimano's Rapidfire Plus Deore shift lever delivers smooth control out on the trail. The new I-SPEC EV lever offers a wide range of adjustments including increased lever slide range.Deore M5100 mountain bike Rapidfire shifter pod featuring 2-way release for cost effective 11-speed shifting performanceLight to the touch but positive and crisp, Vivid indexing provides a constant amount of shift lever force across all 11 sprockets2-way release allows shifting from various riding positions; the upper lever still performs the same shift function, but it can now swing in either direction allowing it to be released by the thumb or index finger11-speed compatible - for use with precision 11-speed MTB drivetrainsPod design allows the use of these shifters with any brake leverI-spec-EV design is developed to attach directly to I-spec-EV brake leversBarrel adjuster for fine gear tuningComplete with Optislick inner and SP41 outer cables
With quick lever access and a light and responsive lever action, Shimano's Rapidfire Plus Deore shift lever delivers smooth control out on the trail. The new I-SPEC EV lever offers a wide range of adjustments including increased lever slide range.Deore M5100 mountain bike Rapidfire shifter pod featuring 2-way release for cost effective 11-speed shifting performanceLight to the touch but positive and crisp, Vivid indexing provides a constant amount of shift lever force across all 11 sprockets2-way release allows shifting from various riding positions; the upper lever still performs the same shift function, but it can now swing in either direction allowing it to be released by the thumb or index finger11-speed compatible - for use with precision 11-speed MTB drivetrainsPod design allows the use of these shifters with any brake leverI-spec-EV design is developed to attach directly to I-spec-EV brake leversBarrel adjuster for fine gear tuningComplete with Optislick inner and SP41 outer cables
The 105 R7000 Front Derailleur features an optimised, easy to shift, smooth power-stroke. This provides a very natural and easy to activate shifting feel and lighter mechanism actuation; it feels very easy to shift across chainrings. 2 x 11 SpeedMaterial: Clamp: Aluminium; Plate: SteelChain Line: 43.5mmWeight: 95gThanks to the enhanced design, Shimano has designed this front derailleur so that it is compatible with most cable routing options on the market; it also comes complete with a, integrated cable tension adjustment screw to ensure excellent adjustability and convenience when fine-tuning. This is a popular choice for cyclists who are chasing reliability and performance at a wallet friendly price.
The Shimano RD-R3000 9-speed Rear Derailleur features an advanced light action for low-friction shifting up or down the block, a wide link design for increased rigidity and precise gear shifts. The super light shift action is complemented by large 11 tooth pulleys which run on high quality bushings to offer reduced noise and extended service life.Compatible with 9-speed drivetrainsShort cage: 37 tooth total capacity, rear sprocket size range 11-32TMedium cage: 43-tooth total capacity, rear sprocket size range 11-34T11-tooth pulleys for reduced pulley wear & chain noiseWide link design for increased rigidity & precise gear shifts
The Shimano XT SM-RT76 disc brake rotors utilise the same design as the RT79 centrelock versions, allowing those with 6 bolt hubs to run a matching caliper and disc combo for optimum performance. These brake discs are ideally suited to Shimano Saint, Deore XT and XTR systems, offering additional versatility with minimal weight penalty. The rotors feature a precision cut stainless steel braking surface which improves pad clearing in muddy conditions while aiding cooling under high load, increasing pad performance and life. The large forged alloy spider supports the rotor braking surface, increasing rigidity and reducing weight.
This high quality 10-speed road cassette uses hyperglide sprockets that have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load. A range of sprocket ratio's are available, allowing for a more efficient use of energy through finer cadence control or a wide spread for tackling steep ascents and descents. Sprockets are cut away and drilled to reduce weight without reducing rigidity. All the sprockets and the steel lockring have a nickel-plated finish which provides a hard wearing resistance to corrosion and the cassette is designed for use with Super Narrow 10-speed HG chains.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
Tough, aggressive and light weight 12-speed SLX Rapidfire shift levers with Vivid indexing and 2-way release function Light to the touch but positive and crisp, Vivid indexing provides a constant amount of shift lever force across all 12 sprockets 2-way release allows shifting from various riding positions; the upper lever still performs the same shift function, but it can now swing in either direction allowing it to be released by the thumb or index finger For use with 12-speed transmissions only Pod design allows the use of these shifters with any brake I-spec-II lever Removable optical gear display with integrated cover allows the use of these shifters with any brake lever Barrel adjuster for fine gear tuning Complete with inner and outer cables Multi-position adjustable mount for custom lever positioning I-spec-II design is developed to attach directly to I-spec-II brake levers