SRAM X01 DH XG-795 7 Speed CassetteBringing you all the gears you need and none that you don’t, the X01 Downhill (DH) XG-795 7 Speed Cassette is specifically optimised for use where your downhill mountain bike (MTB) is most at home - going fast down tough descents. Adopting SRAM’s Mini Block and X-Dome technologies, it’s extremely lightweight, works with all SRAM XD 11/12-Speed compatible freehubs and offers you outstanding mud-clearing ability as the trail conditions get tough. Finally, the carefully chosen tooth jumps eliminate multiple shifts to find an appropriate gear, saving you precious time as you’re racing for a podium spot.Features: Speed: 7-Speed Compatibility: SRAM X01 and GX downhill (DH) 1x7-Speed drivetrains, 11-Speed chains Freehub Compatibility: SRAM XD types Use: Downhill (DH) Ratio: 10-24T:10,12,14,16,18,21,24T Technologies: Mini Block, XD, X-Dome, Jet Compatible with SRAM Powerchain and other 11-Speed chains Compatible with all SRAM 11-Speed chains Optimised gear steps eliminate double and triple shifts. Suitable for any XD compatible wheel Manufacturer's Part Number: CS-XG-795-A1 Weight: 136g Please Note: Although this is a 7-Speed cassette, it uses thinner 11-Speed type sprockets, so must be used along with an 11-Speed chain.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Power every ride. We’ve taken the reliability, elegance and features of Quarq’s legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. FEATURES An elegant integrated design DUB-PWR spindle-based unit measures left side power to calculate total watts Proven Quarq reliability and accuracy Long battery life (400+ hours) to power a season of rides User replaceable lithium AAA battery DUB bottom bracket adds durability and simplicity Waterproof (IPX7 waterproof to 1 meter for 30 mins) Lightweight (less than 40g heavier than standard crankset) Available in 48/35T and 46/33T configurations
Force 22 HRD shift-brake levers combine all the great performance of mechanical 11-speed with the performance of a hydraulic disc braking system. With our trademark Reach Adjust as well as improved ergonomics for better finger wrap, our HydroR controls are the touch point for better braking. Our hydraulic brakes deliver more braking force with less hand effort and better modulation. Features: New lever body design offering improved finger wrap and improved comfort and control New internals with a new bleed port for easier access A new master cylinder design featuring new seals and a new piston design New shift paddle design is both lighter weight and offers improved finger clearance. Direct Mount Caliper fitment
SRAM Code RSC Disc BrakeDesigned for aggressive riding on the toughest of trails, the RSC Disc Brake from SRAM is ready for the challenge. This model features larger pistons and master cylinder to give you exceptional stopping power. You can also enjoy enhanced heat management for exceptional control on long descents.Features:Lever Material: Aluminium - ForgedCaliper Material: Forged AluminiumPiston material: Phenolic PlasticCaliper Design: 4-piston, dual diameter CaliperFinish: Black AnodisedRecommended Rotor: CenterlinePad: Steel-backed metal sinteredFluid Type: DOT 5.1Lever Mount: AmbidextrousCaliper Mount: Post MountAdjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo AdjustSpecial Features: Tool-free Reach Adjust, Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatibleTechnology Highlight(s): SwingLink™, PURE™ Bladder, TPC™ PlusPad/Holder: Top loadingIntended Use: All-mountain (AM)/Downhill (DH)/ Front Riding (FR)System: Open SystemRotor Sizes: 140 (rear), 160, 170, 180, 200, 203mm (sold separately)Tri-Align Caliper Positioning System: NoTool-Free Pad Replacement: YesBend Zone™: YesSold individuallyStainless Hardware: YesManufacturer Reference Codes: Front - 950mm: 00.5018.109.000; Rear - 1800mm: 00.5018.109.001Please Note: Centerline rotor NOT includedTechnologies:Contact Point Adjustment™: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the sameMatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp - a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™ is also available and works with any split-clamp design and RockShox® PushLocPiggyBack™ Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement - so you can switch your levers on the handlebar and run them moto-style without hasslePURE™ Bladder: SRAM’s new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistencyReach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyoneSwingLink™: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband - but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precisionTPC Plus™ (Timing Port Closure): A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistencyBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Code RSC Disc BrakeDesigned for aggressive riding on the toughest of trails, the RSC Disc Brake from SRAM is ready for the challenge. This model features larger pistons and master cylinder to give you exceptional stopping power. You can also enjoy enhanced heat management for exceptional control on long descents.Features:Lever Material: Aluminium - ForgedCaliper Material: Forged AluminiumPiston material: Phenolic PlasticCaliper Design: 4-piston, dual diameter CaliperFinish: Black AnodisedRecommended Rotor: CenterlinePad: Steel-backed metal sinteredFluid Type: DOT 5.1Lever Mount: AmbidextrousCaliper Mount: Post MountAdjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo AdjustSpecial Features: Tool-free Reach Adjust, Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatibleTechnology Highlight(s): SwingLink™, PURE™ Bladder, TPC™ PlusPad/Holder: Top loadingIntended Use: All-mountain (AM)/Downhill (DH)/ Front Riding (FR)System: Open SystemRotor Sizes: 140 (rear), 160, 170, 180, 200, 203mm (sold separately)Tri-Align Caliper Positioning System: NoTool-Free Pad Replacement: YesBend Zone™: YesSold individuallyStainless Hardware: YesManufacturer Reference Codes: Front - 950mm: 00.5018.109.000; Rear - 1800mm: 00.5018.109.001Please Note: Centerline rotor NOT includedTechnologies:Contact Point Adjustment™: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the sameMatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp - a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™ is also available and works with any split-clamp design and RockShox® PushLocPiggyBack™ Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement - so you can switch your levers on the handlebar and run them moto-style without hasslePURE™ Bladder: SRAM’s new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistencyReach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyoneSwingLink™: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband - but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precisionTPC Plus™ (Timing Port Closure): A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistencyBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Road's HydroR hydraulic braking platform provides better speed modulation and braking performance in all conditions. Pair with a Rival 11-Speed shifter for 1x set-up. HydroR brake lever features and all new design, with revised ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition.Lever:Revamped designErgoDynamic design for better finger wrapIndividual reach adjustFront and rear brake may be converted on the gripsLower hand forces requiredOpen system hydraulicFully sealed systemEasy bleed accessCaliper:Forged aluminum disc caliper with stainless steel backed pads and hardwareOptimized power & modulation for road & cyclocross18 mm pistonRoad specific caliper and piston ratioFully sealed system
Force 22 HRD shift-brake levers combine all the great performance of mechanical 11-speed with the performance of a hydraulic disc braking system. With our trademark Reach Adjust as well as improved ergonomics for better finger wrap, our HydroR controls are the touch point for better braking. Our hydraulic brakes deliver more braking force with less hand effort and better modulation. Features: New lever body design offering improved finger wrap and improved comfort and control New internals with a new bleed port for easier access A new master cylinder design featuring new seals and a new piston design New shift paddle design is both lighter weight and offers improved finger clearance. Direct Mount Caliper fitment
Lightweight and reliable, the one-piece, steel X-Dome shaped SRAM XG 1290 cassette works brilliantly alongside XDR driver bodies and with its 10-tooth start, the cog-to-cog progression is more gradual. This quality construction and innovative design ensure an effective and efficient experience with every shift.
SRAM XG-1290 12 Speed CassetteMove through the gears quickly and efficiently thanks to this high-quality cassette by SRAM. Optimised for use with innovative electronic shifting setups, it provides a gradual progression from cog to cog and features a 10-tooth start and a wider gear range for a confident performance you can count on.Clean Shifting PerformanceBuilt with a one-piece steel X-Dome design, the cassette maintains a low weight for high-performance and works ideally with XDR driver bodies. This superb SRAM model ensures a smooth and swift shift on every outing.Features:Use: RoadSpeed: 12 speedTechnology: XGCompatibility: XDR Driver BodyCog Finish: SilverCompatibility: XDR Driver BodyPart No: CS-XG-1290-D1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM XG-1290 12 Speed CassetteMove through the gears quickly and efficiently thanks to this high-quality cassette by SRAM. Optimised for use with innovative electronic shifting setups, it provides a gradual progression from cog to cog and features a 10-tooth start and a wider gear range for a confident performance you can count on.Clean Shifting PerformanceBuilt with a one-piece steel X-Dome design, the cassette maintains a low weight for high-performance and works ideally with XDR driver bodies. This superb SRAM model ensures a smooth and swift shift on every outing.Features:Use: RoadSpeed: 12 speedTechnology: XGCompatibility: XDR Driver BodyCog Finish: SilverCompatibility: XDR Driver BodyPart No: CS-XG-1290-D1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM XG-1290 12 Speed CassetteMove through the gears quickly and efficiently thanks to this high-quality cassette by SRAM. Optimised for use with innovative electronic shifting setups, it provides a gradual progression from cog to cog and features a 10-tooth start and a wider gear range for a confident performance you can count on.Clean Shifting PerformanceBuilt with a one-piece steel X-Dome design, the cassette maintains a low weight for high-performance and works ideally with XDR driver bodies. This superb SRAM model ensures a smooth and swift shift on every outing.Features:Use: RoadSpeed: 12 speedTechnology: XGCompatibility: XDR Driver BodyCog Finish: SilverCompatibility: XDR Driver BodyPart No: CS-XG-1290-D1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM HYDRAULIC DISC BRAKE S900 AERO HYDROT LEFT FRONT BRAKE 950MM FLAT MOUNT 20MM OFFSET (ROTOR & BRAKET SOLD SEPARATELY)
If your ride doesn’t feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it.Key Features:Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability,1x specific for use with 10-44 XPLR and 10-36 cassettes,SRAM AXS™ enabled, allowing easy personalization,Chain management keeps the drivetrain quiet and secure,Larger X-SYNC™ pulleys for increased durability and efficiency,Compatible with existing eTap® batteries.
Sometimes all you need is a fresh coat of paint. With revised graphics to match SRAM RED eTap components, the PowerdomeX is still the most advanced cassette ever made. It's super light, deadly silent and delivers an undeniable performance advantage. The nine cogs in the cog cluster are machined from a single block of high grade tool steel, increasing stiffness while weighing even less than a titanium cassette. Between each cog is a StealthRing elastomer to reduce vibration and noise. Cutouts on the rear cog further reduce weight and add stiffness. It's the final piece in the drivetrain puzzle, and paired with the new SRAM Red rear derailleur, it delivers ultra-fast, ultra-quiet shifts that will always put you in the right gear.Technology Highlights: PowerdomeX, X-Glide Cogs, StealthRingsWeight: 151g (11-25)Speeds: 11-Speed
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 Ultimate Disc BrakeReady for fast and fun rides, this mountain bike (MTB) hydraulic disc brake features a tough build combined with proven SRAM technologies for conquering the demands of modern day trail-riding. Featuring a high-quality carbon lever blade with a forged aluminium lever body and caliper, this model offers a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you.Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride.For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing.Features: Lever Blade Material: Carbon Lever Body Material: Forged Aluminium Caliper Body Material: Forged Aluminium Caliper Hardware Material: Titanium Piston Material: Phenolic Plastic Use: MTB Brake Type: Hydraulic disc brake Pad Type: Steel-backed Organic Bracket Type: Direct Mount DIR Bracket Included: No, available separately Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: SingleTechnologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.”Manufacturer's Part Number: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LHBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM XG-899 E-Block MTB CassetteSRAM's XG-899 E-Block MTB Cassette is part of the new EX1 eBike specific drivetrain and has been specifically designed for the extra torque and demands of electric MTB bikes.The XG-899 features larger steps between the sprockets, which is a completely new technology that has been designed to optimise the power output of your electric off road bike. The individual cogs architecture has been engineered to work with the chains inner and outer links, giving you extremely refined inboard and outboard shifting.It is manufactured from case-hardened tool steel that ensures mile after mile of durable and consistent performance. Features: Gear Ratios: 11-48T Speed: 8-Speed Ideal mid-ship motor gear range Increased chain wrap on climbing cogs Symmetric shifting geometry allows fast, precise gear shifts Recommended Chain: Eagle chain compatible only Recommended Group: GX DH Cogs: 11,13,15,18,24,32,40,48 Compatibility: Non XD driver body compatibleBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Go further with the SRAM Force® 43/30 wide crankset. Its 43/30 chainrings encourage exploring the most challenging routes on the newest crop of versatile and fun drop bar bikes. Shifting is smooth, accurate, and dependable using our proven X-Range™ gearing based around a tight 13-tooth difference between the small and big rings. The wider stance of the chainrings provides clearance for extra wide tires, giving you the option to explore new, more challenging routes.Features:X-Range™ gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear,Crisp and accurate front shifts,Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1” tire widths (43/30 chainrings only),Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands,Requires Force wide front derailleur,DUB™ bottom bracket adds durability and simplicity.SPECIFICATIONSSpeeds: 12,BB Compatibility: All SRAM Road DUB BBs,Chainring Size: 43/30,Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm, 177.5mm,Chainline: 47.5mm,BB Spindle Interface: DUB,Chainring material: Aluminum,Guard: No Guard,Bolt Circle Diameter (BCD): 94 BCD,Crank arm material: Carbon,Color (Crank arm): Natural carbon.