Sqlab's Stuby Short Grips offer a cutting-edge take on classic bar-ends and offer a more climbing orientated position than their aero focussed Innerbarends and are compatible with right-side Twist Grip shifters. If you want to maximise your climbing efficiency while having numerous hand positions for vast comfort, the Stuby Grips are for you!Unique grip/barend design allows you to pull on the outside of the handlebar for more powerUnusual shape means you grip barends further back, creating a more upright back positionCan still be used like traditional barends for a lower, sportier ride positionOffers many different grip positions despite the compact designCompatible with right-side twst grip shifters (e.g. Rohloff, Nexus, Alfine, SRAM Eagle)155mm/92mm long and lightweight (from just 245g - size S)
Sqlab's Stuby Short Grips offer a cutting-edge take on classic bar-ends and offer a more climbing orientated position than their aero focussed Innerbarends and are compatible with right-side Twist Grip shifters. If you want to maximise your climbing efficiency while having numerous hand positions for vast comfort, the Stuby Grips are for you!Unique grip/barend design allows you to pull on the outside of the handlebar for more powerUnusual shape means you grip barends further back, creating a more upright back positionCan still be used like traditional barends for a lower, sportier ride positionOffers many different grip positions despite the compact designCompatible with right-side twst grip shifters (e.g. Rohloff, Nexus, Alfine, SRAM Eagle)155mm/92mm long and lightweight (from just 245g - size S)
The SQlab 702 Grips are designed and shaped to offers a maximum contact area, support and comfort. The extra-large wing supports your wrist and evenly distributes pressure thanks to its very large contact area. This makes them perfect for hybrid, trekking and city bikes.Unique design offers maximum hand contact area for supreme support and comfortRaised grip end picks up the side of the hand and supports it better than regular gripsHelps to relieve pressure on the ulnar nerve, the median nerve and the carpal tunnel passVarious rubber compounds ensure a perfect grip level and high comfort139mm long and lightweight (from just 215g - size S)
The SQlab 702 Grips are designed and shaped to offers a maximum contact area, support and comfort. The extra-large wing supports your wrist and evenly distributes pressure thanks to its very large contact area. This makes them perfect for hybrid, trekking and city bikes.Unique design offers maximum hand contact area for supreme support and comfortRaised grip end picks up the side of the hand and supports it better than regular gripsHelps to relieve pressure on the ulnar nerve, the median nerve and the carpal tunnel passVarious rubber compounds ensure a perfect grip level and high comfort139mm long and lightweight (from just 215g - size S)
The SQlab 702 Grips are designed and shaped to offers a maximum contact area, support and comfort. The extra-large wing supports your wrist and evenly distributes pressure thanks to its very large contact area. This makes them perfect for hybrid, trekking and city bikes.Unique design offers maximum hand contact area for supreme support and comfortRaised grip end picks up the side of the hand and supports it better than regular gripsHelps to relieve pressure on the ulnar nerve, the median nerve and the carpal tunnel passVarious rubber compounds ensure a perfect grip level and high comfort139mm long and lightweight (from just 215g - size S)
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
The 611 Ergowave Active 2.1 is designed to meet the requirements of all-mountain and enduro riding, making it the perfect match for modern bikes that relish long days on the biggest terrain.Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingS-tube rails and superlight foam padding keep weight down to just 223g (13cm size)The new 611 Ergowave Active 2.1 has been given a form, function and comfort upgrade for long uphills and trail descents on the mountain bike. The 611 Ergowave Active 2.1 is equipped with the new active technology with a softer and lighter movement with less weight. The SQlab active saddle technology means that the saddle follows the pedalling movement, which increases comfort, mobilises the intervertebral discs and minimises pressure on the sit bones.The saddle's wave-like shape and raised rear ensure perfect rearward support and optimum pressure distribution which significantly improves power transmission to the pedal. The lowered nose, in combination with the recess in the middle, creates more space and clearance for the perineal area for both women and men. The padding material has been specially adapted to the requirements of MTB and has more damping in rough terrain. High-quality Kevlar cover protects the particularly stressed areas on the saddle. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave Active 2.1!
The 611 Ergowave Active 2.1 is designed to meet the requirements of all-mountain and enduro riding, making it the perfect match for modern bikes that relish long days on the biggest terrain.Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingS-tube rails and superlight foam padding keep weight down to just 223g (13cm size)The new 611 Ergowave Active 2.1 has been given a form, function and comfort upgrade for long uphills and trail descents on the mountain bike. The 611 Ergowave Active 2.1 is equipped with the new active technology with a softer and lighter movement with less weight. The SQlab active saddle technology means that the saddle follows the pedalling movement, which increases comfort, mobilises the intervertebral discs and minimises pressure on the sit bones.The saddle's wave-like shape and raised rear ensure perfect rearward support and optimum pressure distribution which significantly improves power transmission to the pedal. The lowered nose, in combination with the recess in the middle, creates more space and clearance for the perineal area for both women and men. The padding material has been specially adapted to the requirements of MTB and has more damping in rough terrain. High-quality Kevlar cover protects the particularly stressed areas on the saddle. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave Active 2.1!
Sqlab's Stuby Grips offer a cutting-edge take on classic bar-ends and offer a more climbing orientated position than their aero focussed Innerbarends. If you want to maximise your climbing efficiency while having numerous hand positions for vast comfort, the Stuby Grips are for you!Unique grip/barend design allows you to pull on the outside of the handlebar for more powerUnusual shape means you grip barends further back, creating a more upright back positionCan still be used like traditional barends for a lower, sportier ride positionOffers many different grip positions despite the compact design155mm long and lightweight (from just 284g - size M)
The SQlab 611 Ergowave Saddle was precisely designed to accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingSolid CrMo rails and PU Light foam padding keep weight down to just 244g (12cm size)The 611 Ergowave CrMo features a wave-like shape and raised rear section provides that perfect rearward support and optimal pressure distribution for improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave!
Introducing the SQlab 30X Handlebar, which offers a choice of a 12 or 16 degree back sweep. The 12° back sweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain occurring in downhill riding. The 16° Back sweep provides a natural transition from the lower arm to the hand when in a more stretched riding position.Increased Back sweep - With its short reach provides a natural transition from the lower arm to the hand.4° Upsweep - Brings the elbows into a perfect position for a dynamic riding style.31.8mm clamp diameter30mm RisePassed the Zedler End of Life test with flying colours The perfect combination of form, wall thickness and diameter with the corresponding anatomically optimized bend for various riding dynamics, currently make the new SQlab 30X handlebar series the most stable as well as the lightest bar in its field.Area of use: Gravity & e-performanceWidth in (mm): 780Shortened maximum width (mm): 720Upsweep (°): 4Stretch (mm): 0Material: AluminiumWeight (g): Approx. 325Clamping width of the stem: Min. 46mm / Max 58mm
The SQlab 710 Grips are designed and shaped to offer secure grip and comfort. The extra-large wing supports your wrist and evenly distributes pressure thanks to its very large contact area. This makes them perfect for comfort-orientated mountain bikes and sporty trekking bikes.Unique design offers maximum hand contact area for supreme grip and comfortRaised grip end picks up the side of the hand and supports it better than regular gripsHelps to relieve pressure on the ulnar nerve, the median nerve and the carpal tunnel passVarious rubber compounds ensure a perfect grip level and high comfort136mm long and lightweight (from just 165g - size S)
The new e-bike saddle 6OX combines the advantages of the successful saddle models Ergowave and Ergolux. As part of the product development, the shape of the saddle was adapted and perfected for the special use on the E-MTB as well as for the Gravity Bike.Perfect Fit - The correct saddle width is a key for maximum performance. Available widths in cm: 13, 14, 15, 16More free space - less pressure - The proven, outstanding SQlab staged saddle shape with the saddle nose that dips below level also provides more freedom for the 6OX and less pressure, equally so for men and for women.Perfect hold - The SQlab saddle shape with the raised seat surface is already perfectly suited for riding uphill and provides more power to the pedals on straights. Additionally, a special non-slip logo design ensures even more grip towards the back.Grip design - The grip material on the raised stage provides additional hold towards the back.Biomechanics - The proven SQlab 6OX active saddle technology provides increased efficiency for pedalling, as well as more comfort and less stress on intervertebral discs.The 6OX saddle is equipped with 3 different elastomer dampers that are tailored individually to body weight and can be interchanged as needed.The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The raised back section provides more rearward support and ensures efficient power transmission. The grip material on the raised back provides additional support to the rear. In addition, the saddle cover is robust, especially at the edges.The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 6OX became a little bit wider, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the E-MTB with perfect dampening properties for rough off-road terrain.Due to these modifications, the 6OX is the ideal saddle for long and steep climbs on the E-MTB and at the same time, even on bikes without an engine, it provides an optimum relief. The wave shaped 6OX profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones.The SQlab active-saddle technology lets the saddle follow the pedalling motion as comfort increases, the vertebral discs are mobilized and pressure on the sit bones is minimised. The correct width saddle is a prerequisite for maximum performance. Available widths: 13 cm/14 cm/15 cm/16cm.
The 711 Tech & Trail 2.0 Grips are an ergonomic grip for long distances! Perfect fit, cushioning and comfort for the mountain bike.Perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikesOffers shock absorption and comfortVarious rubber compounds ensure a perfect grip level and high comfortSQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber.The 711 features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The clamp moved from the outside to the inside during the product development. This increases the shock absorption and comfort on the hand s outer side.In addition, the outside surface area was increased using every trick in the book, making it as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: With the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control.The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. SQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.
The 711 Tech & Trail 2.0 Grips are an ergonomic grip for long distances! Perfect fit, cushioning and comfort for the mountain bike.Perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikesOffers shock absorption and comfortVarious rubber compounds ensure a perfect grip level and high comfortSQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber.The 711 features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The clamp moved from the outside to the inside during the product development. This increases the shock absorption and comfort on the hand s outer side.In addition, the outside surface area was increased using every trick in the book, making it as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: With the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control.The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. SQlab only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.
The 611 Ergowave Active 2.1 is designed to meet the requirements of all-mountain and enduro riding, making it the perfect match for modern bikes that relish long days on the biggest terrain.Designed specifically for use on all mountain and enduro mountain bikesWave shape with raised rear section is perfect for efficient power transferLowered nose is 4mm wider than 612 and provides optimal relief for the perineal area280mm in length to give maximum range of movement when climbing and descendingS-tube rails and superlight foam padding keep weight down to just 223g (13cm size)The new 611 Ergowave Active 2.1 has been given a form, function and comfort upgrade for long uphills and trail descents on the mountain bike. The 611 Ergowave Active 2.1 is equipped with the new active technology with a softer and lighter movement with less weight. The SQlab active saddle technology means that the saddle follows the pedalling movement, which increases comfort, mobilises the intervertebral discs and minimises pressure on the sit bones.The saddle's wave-like shape and raised rear ensure perfect rearward support and optimum pressure distribution which significantly improves power transmission to the pedal. The lowered nose, in combination with the recess in the middle, creates more space and clearance for the perineal area for both women and men. The padding material has been specially adapted to the requirements of MTB and has more damping in rough terrain. High-quality Kevlar cover protects the particularly stressed areas on the saddle. If you want a supremely comfortable saddle for your all mountain or enduro bike, look no further than the SQlab 611 Ergowave Active 2.1!
The 612 Ergowave Active 2.1 was specifically designed to accommodate the requirements of both competitive and leisure cyclists both on the road or mountain bike. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures resulting in improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. The flat but slim SQlab MaxContact saddle nose and the firm padding of the 612 were both specifically designed for the needs on the road bike. The SQlab active technology allows the saddle to follow the biomechanical motion when pedalling resulting in increased comfort, mobilisation of the spinal discs and reduced pressure to the sit bones. Perfect fit - For the best performance the fit is crucial. Available widths in 12 / 13 / 14/ 15cmSleek rear & lower saddle nose - The raised back section provides more rearward support and ensures efficient power transmission. The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike.Centre Dip - The slight dip in the centre of the saddle reduces pressure to the sensitive tissue areas of the perineum.Saving energy - The wave shaped Ergowave profile which contours from the rear to the front offers a perfect form-fit shape for most sit bones. The rider does not need to be seated in an inefficient and tiring sitting position and all energy can be used for forward propulsion.Low and flat - The flat saddle nose has a slight curvature which provides maximum contact area providing and associated reduced pressure. This shape provides a narrow saddle nose which minimizes chafing on the inside of the thighs while pedalling.Relief of the intervertebral discs - SQlab s active saddle technology enables a physiologically correct movement of the pelvis. A rounder pedalling motion is achieved which provides for reduced pressure to the lumbar spine and facet joints. This can contribute to less fatigue and prevention of pain in the lumbar spine.