Introducing the Atlas pedal. A low-profile, lightweight, wide aluminium body with double-concave platform. The svelte design makes it perfect for trail bikes while chromoly axle and bottom loading hex traction pins ensure it can take abuse and perform double duty on your DH rig. All of the Race Face styling and performance expected from the Atlas line.Key Features:Super thin double concave wide platform.,Fully sealed bearing design.,Hex-head threaded pin design offers more bite for added security.,Fore and aft angled bottom-loading pins.,Hidden pin / Grease access port..Specification:Built for: Trail / AM / FR / DH.,Body Material: 6061-T6 Aluminium.,Axle Material:Chromoly steel.,Height 12-14.5mm.,Platform Size: 101x114cm.,Weight: 355g.,# of Pins: 20 SHCS hex traction pins per pedal (10 per side).,Bearings: 4 Full sealed cartridge bearings per pedal..
Our flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring our tried and true sweep design to get you in the attack position on the bike and uses our UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse... Features: Manufactured from UD Carbon with matte clearcoat. Carbon optimized flex for improved small bump compliance. Gold Standard of DH is now wider and stronger. 820mm width for maximum control. 35mm clamp with 20mm & 35mm rise.
Race Face Aeffect CINCH Mountain Bike CranksetReady for aggressive trail, cross country (XC) and modern electric bike (E-Bike) use, this Aeffect crankset adopts Raceface’s Cinch chainring mounting design, opening up a wider range of chainring tooth count options. If you wish, these mountain bike cranks can be combined with Race Face’s Cinch spider (sold separately) to enable the use of other brands of 4-bolt chainrings. Made from tough 6066 T6 aluminium and coming with the tried and trusted steel 24mm EXI spindle, it’s compatible with most bottom bracket types too.Features: Material: Crank Arms: 6066 T6 Aluminium; Spindle: Steel Speed: 9-12-Speed (direct mount chainring required, sold separately) Use: Cross Country (XC), Trail, Electric Bike (E-Bike) Bolt Circle Diameter (BCD): N/A direct mount only Spindle Diameter: 24mm EXI interface spindle Chainline: 51mm Chainring Included: No Bottom Bracket Compatibility: All threaded and pressfit types designed for 24mm spindles Bottom Bracket Included: No Features the CINCH removable spider interface Offers the ability to convert between existing chainring standards while remaining flexible to future developments Optimised stiffness Can run Alloy or Steel Cinch direct mount (DM) chainrings Updated shorter crank lengths feature shorter arms, rather than old design which simply drilled pedal thread in shorter spot on full length crank arm Manufacturer's Part Numbers: 165mm: CK19AE137ARM165BLK; 170mm: CK19AE137ARM170BLK; 175mm: CK19AE137ARM175BLK Weight: 650g (170mm, approx.) Tech Tip: If you would like to mount a 4x100mm chainring to this crankset, you may wish to purchase the following chainring mount adaptor:Race Face SixC Cinch Direct Mount Crankset SpiderBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring the Cinch System, with its interchangeable spider options and their trusted 24mm EXI interface spindle, the Race Face Aeffect Cinch crankset caters well for modern cross country (XC) and mountain bike (MTB) trail riding disciplines. Technologies: - Features the CINCH removable spider interface. - Offers the ability to convert between existing chainring standards while remaining flexible to future developments. - Optimised stiffness. - Can run Alloy or Steel Cinch direct mount (DM) chainrings. - Updated shorter crank lengths feature shorter arms, rather than old design which simply drilled pedal thread in shorter spot on full length crank arm. Manufacturer's Part Numbers: 165mm: CK19AE137ARM165BLK; 170mm: CK19AE137ARM170BLK; 175mm: CK19AE137ARM175BLK
Race Face Next Carbon Riser Bar (35mm)By adopting the larger 35mm clamping standard, the Next Carbon Riser mountain bike (MTB) handlebars bring you precise handling, increased durability and a super low weight of only 180g. Made from unidirectional carbon fibre and 760mm wide, they’re ideal for cross country (XC) racing and trail riding. These tough and efficient bars have 8° of backsweep and 5° of upsweep to put you in the ideal position for control and comfort.Features: Material: Unidirectional (UD) Carbon with matte clearcoat Carbon optimised flex for improved small bump compliance Comes with a Race Face 3 Year Warranty Built for: Cross Country (XC) Racing, Trail, Electric Bike (E-Bike) Backsweep: 8°Upsweep: 5°Weight: 180gBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Next Carbon Riser Bar (35mm)By adopting the larger 35mm clamping standard, the Next Carbon Riser mountain bike (MTB) handlebars bring you precise handling, increased durability and a super low weight of only 180g. Made from unidirectional carbon fibre and 760mm wide, they’re ideal for cross country (XC) racing and trail riding. These tough and efficient bars have 8° of backsweep and 5° of upsweep to put you in the ideal position for control and comfort.Features: Material: Unidirectional (UD) Carbon with matte clearcoat Carbon optimised flex for improved small bump compliance Comes with a Race Face 3 Year Warranty Built for: Cross Country (XC) Racing, Trail, Electric Bike (E-Bike) Backsweep: 8°Upsweep: 5°Weight: 180gBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Your favourite bars just got bigger, longer and lighter, Go figure? The magic of 35, believe the hype. Increasing the bar diameter to 35 allows us to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness and performance Race Face bars are known for. NEW Superlow 10mm rise, slam that cockpit. Get flatbar cockpit height with the comfort and good looks of a riser bar. 760mm full width for increased control without sacrificing weight. Key Features: Manufactured from UD Carbon with matte clearcoat.,Carbon optimized flex for improved small bump compliance.,. Specification: Built for: XC / Trail.,Dimensions: 760mm width, 8° rearward, 5° upward.,Rise: 20mm.,Weight: 180g.,Bar Diameter: 35mm..
Race Face Next SL SeatpostNo fully-Cross-Country build is complete without a high-tech seatpost - and the carbon Next SL has performance written all over it. Lightweight, fully adjustable and optimised in every way, XC and trail riding have never felt better.The Race Face Next SL seatpost is engineered and manufactured using Race Face's optimised carbon technology process, offering outstanding strength for a lightweight XC and trail bike post. The seatpost's tube is manufactured using a highly tested and engineered unidirectional carbon, which offers outstanding fatigue and impact strength. Plus, a simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head.From Lab to TrailGreat mountain biking minds engineered and tested this unidirectional Next carbon tube, making sure it delivers big strength at a low XC weight.On The RailsThe NEXT SL post uses a simple, lightweight 2-bolt system that lets you install the saddle without disassembling the head. Brilliant!Comfortable SeatingGet that tilt right or you'll be walking funny for days. Tilt adjustment allows for 6° up/12° down with zero offset.Features: Material: Carbon fibre post, Alloy saddle clamping head Saddle Rail Compatibility: Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon Tilt Adjustment: 6-degrees up/12-degrees down Offset: 0mm Features Race Face's updated Hunter head design Angled clamp bolts allow easy tool access for hassle-free adjustment and tightening The rubber seatpost grommet fully seals the post to prevent water from entering your seat tube Wide lower cradle gives extra rail support for lightweight saddle rails Narrow upper cradle increases the amount of forward/back saddle adjustmentManufacturer's Part Number: OSP14NX27.2X400YS7211 Black 27.2mm x 400mm OSP14NX30.9X400PBLK7C Black 30.9mm x 400mmBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Next seatpost sets a new standard for a performance carbon post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness. The carbon tube is engineered & manufactured using Race Face's optimized carbon technology process, offering outstanding strength for a lightweight XC and trail post.Key Features:Features Race Face exclusive new Hunter head design,Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head,Thumbscrew tightening system allows quick dial in of the saddle angle by hand,Angled clamp bolts allow easy tool access for hassle free adjustment and tightening,The rubber seatpost grommet fully seals the post to prevent water entering your seat tube,Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon,Wide lower cradle gives extra rail support for lightweight saddle rails,Narrow upper cradle increases the amount of forward/back saddle adjustment,Tilt Adjustment 6° up 12° down with Zero offset,The seatpost tube is manufactured using our proven Next optimized carbon technology,The highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post..Specifications:Built For: XC/Trail,Size: 27.2, 30.9 & 31.6mm,Length: 400mm,Weight: 250g (30.9mm).
Designed in Canada, the rally-rated Æffect R crankset brings enduro rated strength but keeps the weight in the XC range. Its forged 7050 AL construction optimizes stiffness without added weight. The Æffect R features our versatile CINCH System for plenty of spider options as well as our trusted 24mm EXI interface spindle. In addition to our 170 and 175mm lengths, we've added in a 165mm length, making it a solid crankset choice for today's hard charging trail rider. Key Features: Deep pocket net forged from 7050 AL for superior stiffness.,24mm EXI spindle.,New 165mm length.,Can run Alloy or Steel Cinch DM Rings.,CINCH spider interface.,Black satin finish.,. Specification: Built For: XC / Trail / All Mountain / Enduro / Fat Bike.,Spindle Size: 24mm - 5 Lengths Available.,Weight: 632g (32T DM Alloy, W/O BB).,BB Compatibility: BSA, BB92, PF30.,Size: 165, 170, 175mm..
Race Face Next-R Riser BarsMade for daring enduro and downhill adventures, the quality-built carbon fibre Next-R Riser Bars from Race Face provides is both strong and light for gravity-defying greatness. Designed with aggressive, trail-taming geometry, this 800mm-wide model carefully tuned flex to give enhanced small bump sensitivity, keeping you poised and in control of every ride. With a 20mm rise and oversized 35mm centre section, this is a confidence-boosting addition to your all-mountain cockpit. Features: Material: Unidirectional Carbon Fibre Finish: Matte clearcoat Use: Aggressive Trail, All Mountain, Enduro Width: 800mm Bar Diameter: 35mm Backsweep: 8° Upsweep: 5° Rise: 20mm Weight: 215g Please Note: These bars are only compatible with stems with a central clamp area of 35mm in diameter.Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Flat Mountain Bike PedalsRace Face has enhanced these tough and trail-ready Atlas Flat mountain bike (MTB) pedals with a strong Chromoly (CrMo) axle and fully sealed cartridge bearings. Plus, their large platform has a concave shape for increased foot support. There are also 10 grip pins per side, which are also angled at the front and rear to prevent your foot slipping and causing lower leg injuries. A constant in the Race Face range, with these pedals on your ride, you'll be owning the trails on every session.Features: Body Material: 6061-T6 Aluminum Axle Material: Chromoly (CrMo) Steel Axle Size: Standard 9/16" thread Use: Trail/ All Mountain (AM) /Freeride (FR) / Downhill (DH) and E-Bike Height: 14.5mm Platform Size: 101x114cm Number Of Pins: 20 SHCS hex traction pins per pedal (10 per side) Bearings: 4 fully sealed cartridge bearings per pedal Super thin double concave wide platform Fully sealed bearing design Hex-head threaded pin design offers more bite for added security Fore and aft angled bottom-loading pins Hidden pin/Grease access port Weight: 355gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Flat Mountain Bike PedalsRace Face has enhanced these tough and trail-ready Atlas Flat mountain bike (MTB) pedals with a strong Chromoly (CrMo) axle and fully sealed cartridge bearings. Plus, their large platform has a concave shape for increased foot support. There are also 10 grip pins per side, which are also angled at the front and rear to prevent your foot slipping and causing lower leg injuries. A constant in the Race Face range, with these pedals on your ride, you'll be owning the trails on every session.Features: Body Material: 6061-T6 Aluminum Axle Material: Chromoly (CrMo) Steel Axle Size: Standard 9/16" thread Use: Trail/ All Mountain (AM) /Freeride (FR) / Downhill (DH) and E-Bike Height: 14.5mm Platform Size: 101x114cm Number Of Pins: 20 SHCS hex traction pins per pedal (10 per side) Bearings: 4 fully sealed cartridge bearings per pedal Super thin double concave wide platform Fully sealed bearing design Hex-head threaded pin design offers more bite for added security Fore and aft angled bottom-loading pins Hidden pin/Grease access port Weight: 355gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Go Big And Go Home If you're going to send it protecting your body in case things go sideways is a must. The Flank Core under your jersey helps protect your spine and shoulders with certified D3O™ foam and custom foam chest piece to lessen the impact of a major bail. Removable D30™ High Performance shock absorbing protective foam at shoulders and spine Custom Heat-Moulded foam chest plate Compatible with leading neck braces without compromising fit and protection Strategic fabric mapping. Highly durable dense mesh throughout the core ensures second skin super fit to keep targeted protection in its place and allows for maximum venting Lycra stretch panels are integrated with flatlock seam finish to ensure mobility and comfort through the athlete’s full range of motion. Sizing is built for snug fit
Race Face Next Flat Wide Carbon HandlebarBenefiting from a carbon construction, the Next Flat Wide Handlebar from Race Face has been designed with a hard-wearing premium finish to ensure a durable handlebar that's ready for the challenge. This process ensures the Race Face NEXT bar passes their downhill strength requirements at an impressively low cross country weight. At the top end of Race Face's cross country, Trail And All-mountain segment, sitting above the Turbine, Evolve and Ride product ranges, the Next bars use a reinforced stem anti-crush zone which minimizes the possibility of stress cracks where the stem meets bar. This is the area in which most carbon bars fail. The Flat bars come in 625mm length and have an 8-degree rearward sweep and weigh 175 grams.Features:NEXT bars are manufactured with a leading-edge unidirectional carbon weave & precise manufacturing process. This process ensures Race Face bar designs pass their DH strength requirements at an impressively low XC weight.Reinforced stem anti-crush zone minimizes the possibility of stress risers where the stem meets bar, the area in which most carbon bars fail.Constructed from a high strength unidirectional weave.Use: Cross Country/Racing/Trail/All-MountainSizes: 28.3” or 720mm widthSweep: 8 ° rearwardRise: 19mmBar Diameter: 31.8mmWeight: 202gComes with a Race Face 3 Year WarrantyBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Race Face Next handlebar is manufactured with a leading edge unidirectional carbon weave and a precise manufacturing process. This process ensures Race Face bar designs passes Race Face’s downhill (DH) strength requirements at an impressively low XC weight. It also has a reinforced stem anti-crush zone, which minimizes the possibility of stress risers where the stem meets the bar in the area in which most carbon bars fail.
Race Face sets another industry benchmark with the SIXC - the world's lightest and strongest carbon AM crank and bar. Building on the unprecedented success of our proprietary Optimized Carbon Technology program, SIXC is poised to rewrite the rules in the 5-6 inch travel bike world.SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a crank and bar for the all mountain rider who demands the ultimate in performance. Strong enough for light freeriding yet feathery enough to propel you past the lycra set, SIXC is the product many epic riders have been waiting for.Key Features:SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight.,Minimum bar width of 27.5" or 700mm at indicated cut marks.,Reinforced clamping zones for lock-on grip.,Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers..Specification:Built for: AM / DH,785mm,Sweep: 9° rearward, 4° forward,Rise: 3/4",Bar diameter 31.8mm,Weight: 220g.
Race Face SIXC Carbon Riser HandlebarRace Face views their SIXC Carbon Riser Handlebar the lightest and strongest in the world for all-mountain and downhill cycling. This industry-leader offers exceptional control and agility when tackling tough trails. Lightweight and Strong Carbon Riser BarThe SIXC Carbon Riser Bar is infused with years of dedicated research and development in both carbon and all-mountain products. Race Face has engineered the Carbon Riser Bar for the aggressive rider who demands optimal performance from every area of their machine. This carbon handlebar is strong enough for downhill racing or light freeriding, yet light, fast, and responsive to hit top speed quickly and easily.Features:Use: All-mountain/downhillBar Diameter: 31.8mmSweep: 8° rearward, 4° upwardRise: 19mmReinforced clamping zones for lock-on gripDaily destructive testing from each production run ensures each bar meets the exacting standards set by Race Face engineersWarranty: Race Face 3-YearWeight: 220gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face SIXC Carbon Riser HandlebarRace Face views their SIXC Carbon Riser Handlebar the lightest and strongest in the world for all-mountain and downhill cycling. This industry-leader offers exceptional control and agility when tackling tough trails. Lightweight and Strong Carbon Riser BarThe SIXC Carbon Riser Bar is infused with years of dedicated research and development in both carbon and all-mountain products. Race Face has engineered the Carbon Riser Bar for the aggressive rider who demands optimal performance from every area of their machine. This carbon handlebar is strong enough for downhill racing or light freeriding, yet light, fast, and responsive to hit top speed quickly and easily.Features:Use: All-mountain/downhillBar Diameter: 31.8mmSweep: 8° rearward, 4° upwardRise: 19mmReinforced clamping zones for lock-on gripDaily destructive testing from each production run ensures each bar meets the exacting standards set by Race Face engineersWarranty: Race Face 3-YearWeight: 220gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Next R handlebar from Race face features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face s SixC bars. DH strength and Enduro weight for when you really need to lean into it. It uses carbon optimized flex for improved small bump compliance with a 35mm bar diameter for incredible strength to weight ratio.Manufactured from UD Carbon with matte clearcoatCarbon optimized flex for improved small bump compliance35mm bar diameter for incredible strength/weight ratioSpecification:Colour: BlackBuilt For: Aggressive Trail / AM / EnduroSweep: 8° Backward, 5° UpwardBar Diameter: 35mmRise: 10mm / 20mm / 35mmWeight: 215g (20mm rise)Width: 800mm