Race Face Turbine Mountain Bike Seatpost The Turbine seatpost sets a new standard for a performance aluminum post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness.The aluminum tube is manufactured from 2014 alloy, offering outstanding fatigue & strength for a lightweight XC and trail post.Features: Race Face exclusive new Hunter head design Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head Thumbscrew tightening system allows quick dial in of the saddle angle by hand Angled clamp bolts allow easy tool access for hassle free adjustment and tightening The rubber seatpost grommet fully seals the post to prevent water entering your seat tube Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon Wide lower cradle gives extra rail support for lightweight saddle rails Narrow upper cradle increases the amount of forward/back saddle adjustment Tilt Adjustment 6° up 12° down with Zero offset The seatpost tube is 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio. Race Face's triple butting design maintains strength in critical areas while reducing overall weight. The tube is anodized & shot peened for increased fatigue life. Specifications: Built for: XC/Trail/AM Length: 400mm Weight: 260 grams (30.9)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Ride XC Mountain Bike SeatpostComing with the perfect length and construction for your epic trail rides and fast cross country (XC) racing, the Ride XC seatpost is the ideal upgrade for your mountain bike (MTB). Race Face has made it from a tough forged 6061 aluminium and heat-treated the tube for extra durability. The two-bolt head on this excellent value for money post offers you fine saddle angle adjustment so you can easily obtain your preferred riding position.Features: Material: Head: Forged from 6061 Aluminium; Post: 3D forged 6061 heat-treated aluminium tube Built for: XC/Trail Length: 350mm Seatpost head is strong & fatigue resistant Two-bolt design for easy adjustment while holding rails securely Low profile clamps reduce stress on light-weight rails Lightweight aluminium hardware Butted tube optimises strength to weight ratio & provides a strong tube at a reasonable weight Tube is anodised and shot-peened for increased fatigue life Weight: 295g (27.2mm)Buy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Ride XC Mountain Bike SeatpostComing with the perfect length and construction for your epic trail rides and fast cross country (XC) racing, the Ride XC seatpost is the ideal upgrade for your mountain bike (MTB). Race Face has made it from a tough forged 6061 aluminium and heat-treated the tube for extra durability. The two-bolt head on this excellent value for money post offers you fine saddle angle adjustment so you can easily obtain your preferred riding position.Features: Material: Head: Forged from 6061 Aluminium; Post: 3D forged 6061 heat-treated aluminium tube Built for: XC/Trail Length: 350mm Seatpost head is strong & fatigue resistant Two-bolt design for easy adjustment while holding rails securely Low profile clamps reduce stress on light-weight rails Lightweight aluminium hardware Butted tube optimises strength to weight ratio & provides a strong tube at a reasonable weight Tube is anodised and shot-peened for increased fatigue life Weight: 295g (27.2mm)Buy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Chester StemDesigned for all-mountain, front ride and downhill riding, the Race Face Chester Stem is ready for whatever challenge comes your way. Featuring a durable and lightweight 2014 aluminium alloy construction, a hard-wearing faceplate that prevents stress on your bar and available in two length options, this stem ticks all the boxes. Features:Use: All-Mountain/Front Ride/DownhillStem Angle:Clamp Diameter: 31.8mmStack Height: 40mmRise: 8°Material: 2014 Aluminium alloyColour: BlackSize: 50/70mmWeight: 171g (70mm)Comes with a Race Face 1 Year WarrantyFour bolt bar clamp holds bar securely in position.Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts.Buy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Turbine Stem (35mm)Designed for high performance and durability, this reliable Turbine 35 Stem from Race Face offers reliable steering control for a variety of cycling disciplines including Cross Country, Trail, and All Mountain. Featuring an interlocking 4 bolt bar clamp and benefiting from a lightweight 7075 aluminium construction, this Stem has a 0-degree rise and is available in a variety of lengths to suit your needs.Features: Material: Machined 7075 AluminiumInterlocking 4 bolt bar clampComes with a Race Face 5 Year WarrantyClamp Diameter: 35.0mmBuilt For: Cross Country (XC), Trail, All Mountain (AM)Bar Diameter: 35.0mmSteerer Diameter: 1-1/8"Stem Angle: 0-degree riseStack: 42mmWeight: 181gBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas 35 Mountain Bike StemBenefitting from the excellent rigidity and strength that Race Face’s Atlas range is well known for, the Atlas 35 mountain bike (MTB) stem brings you a larger handlebar clamp design. Its compatibility with the modern trend towards the 35mm clamp size means it offers increased durability and more responsive handling, plus a bar/stem system that’s lighter overall. Tough and trail-ready, it’s a perfect choice for upgrading from your stock unit or as part of your dream custom downhill, freeride or all-mountain bike build.Race Face products are made to endure some of the most abusive riding conditions out there, made for riders who value function as well as fashion. Tested on North Vancouver's notorious 'Shore', you'll be safe in the knowledge that your Race Face gear can take on anything you throw at it.Features: Material: 6061-T6 Aluminium Rise: 0 Handlebar Clamp: 35mm Steer Tube Clamp: 1 1/8" Use: Trail/All-Mountain (AM), Downhill (DH), Freeride (FR) Stack Height: 40mm Invertible: No Stem Cap Included: No Four bolt bar clamp holds bar securely in position Interlocking U-Shaped Handlebar Clamp Geometry Faceplate eliminates stress risers which cause your bar to bend or break Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube Laser etched logos Comes with a Race Face 5 Year Warranty Weight: 35mm: 141g; 50mm: 160g; 65mm: 181gBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Aeffect Mountain Bike StemDesigned with Mountain Bike riding in mind, this Mountain Bike Stem from Race Face is made from incredibly lightweight aluminium and has been shot peened for a durable, hard-wearing finish that prevents corrosion. Features:Material: Forged and CNC machined from 6061 AluminiumUse: Cross-Country (XC)/TrailSize: 50, 60, 70, 80 and 90mmRise: +/- 6° reversibleStack Height: 39mmBar Diameter: 35mmWeight: 155g (60mm)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Chester Stem (35mm)The Chester stem from Race Face is ideal for those who are looking for a stem that can withstand tough and challenging trails. Made from forged 6061 aluminium its design evenly distributes impact making it ideal for all-mountain, downhill or trail cycling. Features:Material: Forged and machined from 6061 aluminiumInterlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the bodyBuilt for: All Mountain/Downhill/TrailRise: 0°Clamp Diameter: 35mmStack Height: 42mmWeight: 170g (60mm)Buy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Chester 35 Direct Mount MTB StemThe Race Face Chester 35 Direct Mount Stem is designed to be strong enough to handle anything that you can throw at it. With its U-shaped clamping design your bars are protected from the stress and strains of aggressive riding, as these forces are transferred through the body of the stem. The Chester 35 is a stem you can rely on, as it will consistently perform and will extend the life of your bars, no matter how hard you hit the trails.Features Machined from 6061 aluminium, this stem is virtually unbreakable Interlocking U-shaped handlebar clamp geometry transferring more load through the stem body and not the bolts Boxxer/Fox direct mount standardSpecifications: Built for: AM/FR/DH Steerer Tube Diameter: 1 1/8" Size: 50mm Rise: 0° Stack Height: 42mm Direct Mount: Boxxer/Fox Bar Diameter: 35mm Weight: 130gBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Turbine R Stem (35mm)Inspired by Race Face's popular 'Haven' model, this Stem has been redesigned to include a 35mm clamp and a 0° rise making it compatible with 35mm bars and modern MTB (mountain bike) designs. Made from a durable construction of 6061-T6 Aluminium and is incredibly lightweight at only 138g, making it ideal for an adventure on the trails. Features:Material: 6061-T6 AluminumFour bolt bar clamp holds bar securely in positionFaceplate eliminates stress risers which cause your bar to bend or breakOpposing bolts on steer tube clamp provide extreme clamping power while reducing stress on the steer tubeLaser-etched logosBuilt for: Trail/All-MountainRise: 0°Bar diameter: 35mmSteer tube diameter: 1⅛"Stack height: 40mmWeight: 138g (50mm)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas MTB StemA versatile stem that can withstand the rigours of rowdy mountain riding, this aluminium-built Atlas model gives a protective and reliable performance on every run. Featuring a four-bolt bar clamp with interlocking u-shaped geometry, it provides a dependable and durable connection between your bar and fork. The faceplate is designed to reduce stress risers which can bend or break your bar, rounding out a top-quality component for downhill and freeriding exertions. Features: Material: 6061-T6 Aluminium Use: Trail, All Mountain, Downhill Steerer: 1 1/8" Stack Height: 40mm Bar Diameter: 31.8mm Rise: 0mmBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas MTB StemA versatile stem that can withstand the rigours of rowdy mountain riding, this aluminium-built Atlas model gives a protective and reliable performance on every run. Featuring a four-bolt bar clamp with interlocking u-shaped geometry, it provides a dependable and durable connection between your bar and fork. The faceplate is designed to reduce stress risers which can bend or break your bar, rounding out a top-quality component for downhill and freeriding exertions. Features: Material: 6061-T6 Aluminium Use: Trail, All Mountain, Downhill Steerer: 1 1/8" Stack Height: 40mm Bar Diameter: 31.8mm Rise: 0mmBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Ride Cross-Country StemThis Cross-Country (XC) Stem from Race Face is made from durable and lightweight aluminium making it the ideal addition to your seatpost. Designed for XC or trail riding.Features:Forged & shot peened from 6061 aluminium for high strength & fatigue resistance at a reasonable weight.Four bolt bar clamp holds bar securely in position.Machined logo on bar clamp gives this value-oriented stem a high-end look.Use: Cross-Country (XC)/TrailRise: 6° (reversible) Bar Diameter: 31.8mmStack Height: 40mmWeight: 175g (110mm with 25.4mm bar clamp)Comes with a Race Face 1 Year WarrantyBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Mountain Bike StemOff-road experts Race Face knows what mountain bike (MTB) components need to withstand aggressive riding and harsh terrains, so it made its Atlas stem from 6061 aluminium and gave it a unique handlebar clamp design. This interlocking type clamp draws impact forces and vibrations into the stem’s body, away from the bolts and preventing stress points on your bars. This tough stem also has an opposing bolt design for the steerer tube clamp for a firm hold without unwanted stress. It’s an ideal addition to any All-Mountain (AM), Cross Country (XC) or Downhill (DH) bike’s cockpit.Features: Material: 6061 Aluminum Use: All-Mountain (AM), Cross Country (XC) and Downhill (DH) Rise: 0° Handlebar Clamp Diameter: 31.8mm Fork Steerer Tube Clamp Diameter: 1.1/8" Stack Height: 40mm Invertible: No Stem Cap Included: No Four bolt bar clamp holds bar securely in position. Interlocking U-Shaped handlebar clamp geometry Faceplate eliminates “stress risers” which cause your bar to bend or break Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tubeAvailable in 1 1/8 with a 31.8mm bar clamp only Laser etched logosComes with a Race Face 5 Year WarrantyWeight: 50mm: 150g; 65mm: 170gBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Flat Mountain Bike PedalsRace Face has enhanced these tough and trail-ready Atlas Flat mountain bike (MTB) pedals with a strong Chromoly (CrMo) axle and fully sealed cartridge bearings. Plus, their large platform has a concave shape for increased foot support. There are also 10 grip pins per side, which are also angled at the front and rear to prevent your foot slipping and causing lower leg injuries. A constant in the Race Face range, with these pedals on your ride, you'll be owning the trails on every session.Features: Body Material: 6061-T6 Aluminum Axle Material: Chromoly (CrMo) Steel Axle Size: Standard 9/16" thread Use: Trail/ All Mountain (AM) /Freeride (FR) / Downhill (DH) and E-Bike Height: 14.5mm Platform Size: 101x114cm Number Of Pins: 20 SHCS hex traction pins per pedal (10 per side) Bearings: 4 fully sealed cartridge bearings per pedal Super thin double concave wide platform Fully sealed bearing design Hex-head threaded pin design offers more bite for added security Fore and aft angled bottom-loading pins Hidden pin/Grease access port Weight: 355gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Flat Mountain Bike PedalsRace Face has enhanced these tough and trail-ready Atlas Flat mountain bike (MTB) pedals with a strong Chromoly (CrMo) axle and fully sealed cartridge bearings. Plus, their large platform has a concave shape for increased foot support. There are also 10 grip pins per side, which are also angled at the front and rear to prevent your foot slipping and causing lower leg injuries. A constant in the Race Face range, with these pedals on your ride, you'll be owning the trails on every session.Features: Body Material: 6061-T6 Aluminum Axle Material: Chromoly (CrMo) Steel Axle Size: Standard 9/16" thread Use: Trail/ All Mountain (AM) /Freeride (FR) / Downhill (DH) and E-Bike Height: 14.5mm Platform Size: 101x114cm Number Of Pins: 20 SHCS hex traction pins per pedal (10 per side) Bearings: 4 fully sealed cartridge bearings per pedal Super thin double concave wide platform Fully sealed bearing design Hex-head threaded pin design offers more bite for added security Fore and aft angled bottom-loading pins Hidden pin/Grease access port Weight: 355gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Flat Mountain Bike PedalsRace Face has enhanced these tough and trail-ready Atlas Flat mountain bike (MTB) pedals with a strong Chromoly (CrMo) axle and fully sealed cartridge bearings. Plus, their large platform has a concave shape for increased foot support. There are also 10 grip pins per side, which are also angled at the front and rear to prevent your foot slipping and causing lower leg injuries. A constant in the Race Face range, with these pedals on your ride, you'll be owning the trails on every session.Features: Body Material: 6061-T6 Aluminum Axle Material: Chromoly (CrMo) Steel Axle Size: Standard 9/16" thread Use: Trail/ All Mountain (AM) /Freeride (FR) / Downhill (DH) and E-Bike Height: 14.5mm Platform Size: 101x114cm Number Of Pins: 20 SHCS hex traction pins per pedal (10 per side) Bearings: 4 fully sealed cartridge bearings per pedal Super thin double concave wide platform Fully sealed bearing design Hex-head threaded pin design offers more bite for added security Fore and aft angled bottom-loading pins Hidden pin/Grease access port Weight: 355gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Flat Mountain Bike PedalsRace Face has enhanced these tough and trail-ready Atlas Flat mountain bike (MTB) pedals with a strong Chromoly (CrMo) axle and fully sealed cartridge bearings. Plus, their large platform has a concave shape for increased foot support. There are also 10 grip pins per side, which are also angled at the front and rear to prevent your foot slipping and causing lower leg injuries. A constant in the Race Face range, with these pedals on your ride, you'll be owning the trails on every session.Features: Body Material: 6061-T6 Aluminum Axle Material: Chromoly (CrMo) Steel Axle Size: Standard 9/16" thread Use: Trail/ All Mountain (AM) /Freeride (FR) / Downhill (DH) and E-Bike Height: 14.5mm Platform Size: 101x114cm Number Of Pins: 20 SHCS hex traction pins per pedal (10 per side) Bearings: 4 fully sealed cartridge bearings per pedal Super thin double concave wide platform Fully sealed bearing design Hex-head threaded pin design offers more bite for added security Fore and aft angled bottom-loading pins Hidden pin/Grease access port Weight: 355gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Atlas Flat Mountain Bike PedalsRace Face has enhanced these tough and trail-ready Atlas Flat mountain bike (MTB) pedals with a strong Chromoly (CrMo) axle and fully sealed cartridge bearings. Plus, their large platform has a concave shape for increased foot support. There are also 10 grip pins per side, which are also angled at the front and rear to prevent your foot slipping and causing lower leg injuries. A constant in the Race Face range, with these pedals on your ride, you'll be owning the trails on every session.Features: Body Material: 6061-T6 Aluminum Axle Material: Chromoly (CrMo) Steel Axle Size: Standard 9/16" thread Use: Trail/ All Mountain (AM) /Freeride (FR) / Downhill (DH) and E-Bike Height: 14.5mm Platform Size: 101x114cm Number Of Pins: 20 SHCS hex traction pins per pedal (10 per side) Bearings: 4 fully sealed cartridge bearings per pedal Super thin double concave wide platform Fully sealed bearing design Hex-head threaded pin design offers more bite for added security Fore and aft angled bottom-loading pins Hidden pin/Grease access port Weight: 355gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Aeffect Flat Mountain Bike PedalsIntroducing the AEffect pedal. Thin platform, concave aluminum body with bottom-loading pins. Shorter spindle design shaves weight making it perfect for trail bikes while the chromoly axle and bottom loading hex traction pins ensure it can take abuse and perform double duty on your DH rig. Hidden grease access port allows for on bike maintenance.Features:Thin concave platform.Reduced spindle length saves weight.Hex-head threaded pin design offers more bite for added security.Hidden/Grease access port for extended life.Built for: trail/am/fr/dhBody material: 6061-t6 aluminumAxle material: chromoly steelHeight: 15-16.9mmPlatform size: 101x100mmPlatform size: 99x98mmWeight: 375gBearings: cartridge bearings and du bushingsNumber of pins: 20 shcs hex traction pins per pedalBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.