Mark Mulville Signature 'Push' stem from Profile. The stem features a drop down design lowers/heightens your bars depending on what way you run it. Machined from 6061 aluminium. Made in USA ###section### Product Specs TYPE: Top Load REACH: 48mm or 53mm RISE: 31.7mm CLAMPING DIAMETER: 22.2mm WEIGHT: 280g
Female axle front hub - Available with a huge choice of 10mm or 14mm female bolts with titanium upgrades available, just select your colour and then confirm your bolt option at the checkout! Made in the USA. The Profile Mini hub features a low flange hub shell machined from heat treated 6061 Aluminium spinning on two precision sealed bearings. The hub features a 7075 aluminium centre axle with female Allen key bolts made from either crmo or titanium. The hub comes in a multitude of deep anodised colours complete with aluminium hardware and steel caped cone washers to grip this hub in your forks better. Axle: Heat treated aluminium centre axle with choice of 10mm or 14mm bolts (Titanium upgrade available at checkout) ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36H BEARINGS: Sealed WEIGHT: 232g / 8.15oz
6Al4V Titanium 6-pawl drivers for Profile Elite BMX cassette hubs & Elite MTB 1-spd cassette hubs. 9 and 10 tooth drivers are for 1/8 width chains. Drivers include bearings & seals. Pawls, springs, & cogs not included.
Replacement titanium driver for the Profile Z Coaster hub. Includes driver, friction O-Ring, and two (2) MFG #6802 driver bearings
Female axle Front hub - Available with a huge choice of 10mm or 14mm female bolts with Titanium Upgrades available, just select your Colour and then confirm your bolt option at the Checkout! Made in the USA. The Profile Elite hub features a low flange hub shell machined from heat treated 6061 Aluminium spinning on two precision sealed bearings. The hub features a 7075 aluminium centre axle with female Allen key bolts made from either crmo or titanium. The hub comes in a multitude of deep anodised colours complete with aluminium hardware and steel caped cone washers to grip this hub in your forks better. Weight: Standard Crmo bolts: 231g / 8.1oz - Titanium Bolts: 204g / 7.19oz. Note: Please select your colour, add to basket and then you will be prompted to confirm your bolt option at the basket. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36H BEARINGS: Sealed WEIGHT: 231g / 8.1oz / 204g / 7.19oz
Description for Profile Mini Titanium Splined Driver with Chromoly Cog 14t not available
Dave Fisher, Profile’s head machinist, has created these limited edition, drilled out, Profile Mini Hubs. The Cats Eye Hubs have the same internals and hardware options as the Mini Hubs. Made in the USA, the Profile Mini hub features a low flange hub shell machined from heat treated 6061 aluminium spinning on two precision sealed bearings. The hub features a 7075 aluminium centre axle and steel capped cone washers to grip this hub in your forks better. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36 BEARINGS: Sealed WEIGHT: TBC
Female axle front hub - Made in the USA. The Profile Mini hub features a low flange hub shell machined from heat treated 6061 Aluminium spinning on two precision sealed bearings. The hub features a 7075 aluminium centre axle with female Allen key bolts made from either crmo or titanium. The hub comes in a multitude of deep anodised colours complete with aluminium hardware and steel caped cone washers to grip this hub in your forks better. ###section### Product Specs AXLE SIZE: Female 10mm SPOKE HOLES: 36 BEARINGS: Sealed, 2x 6903 WEIGHT: 232g / 8.15oz
Description for Profile Elite Titanium Splined Driver with Chromoly Cog 16t not available
Dual Angular Contact,this describes the use of both angular contact bearings and angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. Here are a few key points of the AC-2 BMX Front Hub: The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell without any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in perfect alignment with each other! This ensures superior bearing performance and less chance of premature wear. Hub shell literally floats on the axle. The only force on the bearings is supplied by the wave spring (which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! ###section### Product Specs AXLE SIZE: Females Bolts SPOKE HOLES: 36h BEARINGS: Steel 20mm angular contact WEIGHT: 245g / 8.64oz
Profile 14mm Titanium Rear Hub Axle. This is a conversion kit for Mini, Totem, and Madera V2 Cassette from the 3/8" 3 piece axle to the 14mm Gun Drilled Hollow axle. It will also work with the High Flange hubs. It will not work with the Elite BMX hub. It contains a GDH CrMo axle, non-drive cone spacer, and locknuts.
Replacement axles exclusively for Profile Z Coaster® hubs. Hardware shown on axles (jam nuts & cone spacer) included.
Profile Racing’s Titaniun 14mm GDH CASSETTE HUB AXLE answers the call for strength and weight. It’s CNC precision machined and lighter than standard steel axles by almost half yet it’s just as strong.
Profile Mini front wheel hand built by us at SourceBMX. This custom wheel is paired with the Aliention Black Sheep rim to give you a wheel with Profiles tried and tested Mini hub at a cheaper price. This wheel uses high quality straight gauge stainless spokes. ###section### Product Specs WHEEL SIZE: 20" HUB: Profile Mini Front Hub AXLE: Female RIM: Alienation Black Sheep Rim SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 926g / 2lbs
Profile have been the premiere brand for 3-piece cranks for the last 15 years or more. These cranks are hand made in the USA. The arms are made from heat treated and swagged 4130 chromoly and the spindle is a heat treated gun drilled hollow 4130, 48spine spindle (titanium Upgrade available at Checkout). Titanium Spindle upgrade available at Checkout! Once at checout you will be prompted to choose a Titanium Spindle if required. ###section### Product Specs Crank Type:3pc Spindle Diameter:19mm Includes BB:No Weight:807g / 28.5oz ###shogun-image-section###
Six pawls with 140 points of engagement per revolution. Two fully sealed Enduro bearings. Hardened S-7 Tool Steel outer cog driver-20.2mm width. Titanium threaded inner body driver-16.5mm width. Easily serviced and completely rebuildable. 3/32_ tooth width- Will fit either 3/32_ or 1/8_ chains.
Hand built right here in Sourcebmx. This custom front BMX wheel uses the proven Profile mini front hub inserted into an Alienation Skylark Aero rim using high quality Source stainless steel spokes. NOTE: You can choose the type of female bolts you want in your hub at checkout or even of the titanium upgrades. SPECS: Hub: Profile Mini Front Black Axis: female 10 mm (Choose bolts at checkout!) Circle: Alienation Sky Lark Black Spokes: Source Black Stainless Steel Nipples: Source Black Brass Extras: Source Rim Tape
Hand built right here at Sourcebmx. This custom front BMX wheel uses the tried and tested Profile mini front hub laced into a Cinema 333 rim using high quality straight gauge Source stainless spokes. NOTE: You can choose what type of female bolts you want in your hub at checkout or even upgrade to the titanium versions SPECS: Hub: Profile Mini Front Black Axle: Female (Confirm Bolt Options at Checkout) Rim: Cinema 333 Black Spokes: Source Stainless Black Nipples: Source Brass Nipples Black Extras: Source Rim Tape
Titanium Spindle upgrade or replacement for Profile Race cranks and No Boss Cranks. Made in the USA at profile's factory in Florida. This spindle is machined from aircraft grade titanium and is a must if you are looking to lighten you ride. Fits profile race cranks and other 48spline 19mm cranks. Comes with Crmo Flush bolts and washers. Gun Drilled Hollow. ###section### Product Specs Rise: 19mm Bar Clamping Diameter: Titanium Bar Clamping Diameter: 158g / 5.53oz
Male axle version - Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) Drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option at checkout. Titanium Upgrades also available. Hand Made in the USA! The Profile Mini cassette sets the benchmark for Cassette hubs and was the first BMX Cassette hub. Refined over the years the hub features a heat treated Crmo 14mm hollow axle with 17mm nuts (You can upgrade to a titanium Axle at checkout). The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. Available in no less than 10 premium finished anodised colours. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:501g / 17.65oz