The Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding. Wave Tech Chainrings Tough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions. Press Fit BB-90 Bottom Bracket This chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe. Manufacturer's Part Numbers: 89222991 Black 36/22T 165mm 89222990 Black 36/22T 170mm 89222992 Black 36/22T 175mm
The Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding. Wave Tech Chainrings Tough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions. Press Fit BB-90 Bottom Bracket This chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe. Manufacturer's Part Numbers: 89222988 Black 36/26T 170mm 89222989 Black 36/26T 175mm
Praxis Works Alba 1x10-11 Speed Direct Mount ChainsetDeep in the hills of Santa Cruz, cyclists are met by a nasty, four-mile, 1800 ft. climb named Alba Road. This respected ascent was the inspiration for the Praxis Works Alba road chainset. With its shapely forged-alloy arms, M30 alloy spindle, LevaTime II X-Spider and chainring, the Alba is ready for anything.LevaTime X-Spider and ChainringThis 1x10/11 speed chainset features a LevaTime II (LT2) X-Spider and chainring that's the product of years of relentless testing and tweaking. This all new LT2 X-Spider is even stiffer than the original generation X-Spider. With a new forging design to support the new LT2 5mm plate big rings, this direct mount model keeps things flex-free when it's time to put the power down.One Shot ForgingAt Praxis Works, the primary reason it forges its chainring is that it allows them to create dramatically shaped teeth and ramping surfaces. The brand's “One Shot” forging process allows it to make these shapes, and at the same time, create a harder and tougher ring than the competition's machined rings. Imagine for a second, you have a big hammer and you are hitting a cold block of metal trying to shape it. Now, imagine the hammer is the size of a car and when you swing that hammer you've got hundreds to thousands of tons of pressure behind it. It's a very intense and difficult process that requires a great deal of tooling know-how. This manufacturing process happens to be the brand's specialty.M24 Bottom BracketThis chainset comes complete with a press fit M24/GxP bottom bracket for installing a M24/GxP spindle crank into a BB86 Road or BB90/BB92 MTN Frame. Praxis M24 bottom brackets have a 24mm Drive and a 22mm NonDrive Bearing. These are specifically made for use with Praxis M24 spindle cranks or SRAM GxP spindle cranks. A drive-side wave washer is used for preload of the bearings. This specific press fit M24 bottom bracket is made to be installed in a BB86 Road or BB90/92 MTN frame.Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Please note: Image is for demonstration purposes only, actual chainset contains an M24 bottom bracket.Features: Crankarm Material: Forged Aluminium Chainring Material: Cold-Forged 7075 T6 Aluminium Use: Road Mount: Direct Mount Speed: 10/11 speed Tooth Count: 40T Q-Factor: 147mm Chainline: 45.4mm Number of Chainrings: 1 Chainring Included: Yes Bottom Bracket Included: Yes (M24) Weight: 800g (172.5mm option approx)Manufacturer's Part Numbers: 89222983 Black 40T 165mm 89222979 Black 40T 170mm 89222980 Black 40T 172.5mm 89222981 Black 40T 175mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Zayante M30 2x10-11 Speed ChainsetThe Northern California Coast and Santa Cruz Mountains are steeped in road riding history. To honour it, Praxis Works named its new top-level crank Zayante, after the fabled redwood-covered climb that's a secret training ground for many local pros. The Zayante is the ultimate marriage of lightness, stiffness and versatility.LevaTime X-Spider and X-RingsWith its elegant and shapely hollow forged aluminium arms, the Zayante is in a class of its own. Praxis Works went further and updated it with its LevaTime X-Spider and X-rings. Press Fit BB-90 Bottom BracketThis chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Hollow forged Aluminium Spider and Chainrings Material: Aluminium Use: Road Speed: 10/11 speed Tooth Count: 48/32T BCD: 110mm Direct Mount (32/48T) Spindle: Alloy M30 spindle (30mm drive/28mm non-drive) Q-Factor: 147mm Crankarm Length: 175mm Number of Chainrings: 2 Chainrings Included: Yes Bottom Bracket Included: Yes (M30 Press Fit bottom bracket) Weight: 712g (approx)Manufacturer's Part Numbers: 89222982 Black 48/32T 175mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Zayante X Carbon 2x10-11 Speed ChainsetThe Northern California Coast and Santa Cruz Mountains are steeped in road riding history. To honour it, Praxis Works named its new top-level crank Zayante, after the fabled redwood-covered climb that's a secret training ground for many local pros. The Zayante Carbon is the ultimate marriage of lightness, stiffness and versatility.Carbon Fibre Road ChainsetMade exclusively in Praxis Works' own carbon lab, the Zayante is a homegrown product from start to finish. From initial napkin sketches, to rapid prototyping, revision after revision, exhaustive testing and certification for production. Developed and made in-house with the brand's hybrid "RTM+Filimant Winding" manufacturing methods, everything is done by a dedicated team.LevaTime X-Spider and X-RingsWith its elegant and shapely carbon arms the Zayante is in a class of its own. This past year Praxis Works went further and updated it with its new LevaTime X-Spider and X-rings. Now weighing in at a feathery 620 grams the Zayante Carbon has improved on its already solid reputation as the go-to crank carbon crank for riders globally.Please Note: This chainset comes complete with a Praxis Works M30 BB86 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings.Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Carbon Spider and Chainrings Material: Aluminium Use: Road Speed: 10/11 speed BCD: 160/104 Spindle: Alloy M30 spindle (30mm/28mm) Q-Factor: 147mm Number of Chainrings: 2 Chainrings Included: Yes (5mm thick) Chainring Mount: 4-Bolt Bottom Bracket Included: No, available separately (M30 BB86 bottom bracket compatible) Weight: 620g (approx)Manufacturer's Part Numbers: 89222976 Black 48/32T 170mm 89222975 Black 48/32T 175mm 89222978 Black 50/34T 165mm 89222987 Black 50/34T 170mm 89222977 Black 50/34T 172.5mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Zayante X Carbon 2x10-11 Speed ChainsetThe Northern California Coast and Santa Cruz Mountains are steeped in road riding history. To honour it, Praxis Works named its new top-level crank Zayante, after the fabled redwood-covered climb that's a secret training ground for many local pros. The Zayante Carbon is the ultimate marriage of lightness, stiffness and versatility.Carbon Fibre Road ChainsetMade exclusively in Praxis Works' own carbon lab, the Zayante is a homegrown product from start to finish. From initial napkin sketches, to rapid prototyping, revision after revision, exhaustive testing and certification for production. Developed and made in-house with the brand's hybrid "RTM+Filimant Winding" manufacturing methods, everything is done by a dedicated team.LevaTime X-Spider and X-RingsWith its elegant and shapely carbon arms the Zayante is in a class of its own. This past year Praxis Works went further and updated it with its new LevaTime X-Spider and X-rings. Now weighing in at a feathery 620 grams the Zayante Carbon has improved on its already solid reputation as the go-to crank carbon crank for riders globally.Please Note: This chainset comes complete with a Praxis Works M30 BB86 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings.Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Carbon Spider and Chainrings Material: Aluminium Use: Road Speed: 10/11 speed BCD: 160/104 Spindle: Alloy M30 spindle (30mm/28mm) Q-Factor: 147mm Number of Chainrings: 2 Chainrings Included: Yes (5mm thick) Chainring Mount: 4-Bolt Bottom Bracket Included: No, available separately (M30 BB86 bottom bracket compatible) Weight: 620g (approx)Manufacturer's Part Numbers: 89222976 Black 48/32T 170mm 89222975 Black 48/32T 175mm 89222978 Black 50/34T 165mm 89222987 Black 50/34T 170mm 89222977 Black 50/34T 172.5mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Cadet 2x9 Speed Boost ChainsetThe Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding.Wave Tech ChainringsTough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions.Press Fit BB-90 Bottom BracketThis chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Forged Aluminium Chainrings Material: 7000 Series Aluminium with Hard Anodised finish Use: Mountain Bike (MTB), Cross Country (XC) Speed: 9 speed Tooth Count: 36/22T Spindle: Alloy M30 spindle (30mm/28mm) Q-Factor: 172mm Offset: 3mm Chainring: 52mm CL Boost Number of Chainrings: 2 Chainrings Included: Yes Chainring Mount: 3-Bolt Direct Mount Bottom Bracket Included: Yes (Press Fit BB-90) Weight: 558g (170mm option)Manufacturer's Part Numbers: 89222991 Black 36/22T 165mm 89222990 Black 36/22T 170mm 89222992 Black 36/22T 175mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Cadet 2x10 Speed Boost ChainsetThe Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding.Wave Tech ChainringsTough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions.Press Fit BB-90 Bottom BracketThis chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Features: Crankarm Material: Forged Aluminium Chainrings Material: 7000 Series Aluminium with Hard Anodised finish Use: Mountain Bike (MTB), Cross Country (XC) Speed: 10 speed Tooth Count: 36/26T Spindle: Alloy M30 spindle (30mm/28mm) Q-Factor: 172mm Offset: 3mm Chainring: 52mm CL Boost Number of Chainrings: 2 Chainrings Included: Yes Chainring Mount: 3-Bolt Direct Mount Bottom Bracket Included: Yes (Press Fit BB-90) Weight: 558g (170mm option)Manufacturer's Part Numbers: 89222988 Black 36/26T 170mm 89222989 Black 36/26T 175mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Praxis Works Cadet 1x10-11 Speed Boost ChainsetWith updated arm shaping and spacing, the Cadet is perfect for all types of trail riding. It comes trail-ready with forged aluminium crankarms and a tough alloy spindle for the best balance of stiffness, durability and precision with every rotation.Whether you're into mountain bike (MTB) trail riding or cross country (XC) racing, the Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With the addition of 52mm Boost chainline spacing, this chainset provides increased stiffness for more effective and more precise handling as you charge from trail to trail. Praxis Works has also equipped this model with a three-bolt direct mount (DM) chainring interface, which allows you to use any brand of DM chainring for maximum compatibility.When it comes to a hard-wearing chainset that delivers excellent reliability and performance, the Cadet 1x10-11 Speed Boost Chainset checks all the boxes.Features: Material: Crankarms: Forged Alloy; Spindle: Alloy, 24mm Use: Mountain Bike (MTB), Cross Country (XC) Speed: 10/11 speed Q Factor: 172mm Chainline: 52mm (Boost) Offset Ring: 3mm Chainring: Any brand 3-Bolt Direct Mount ring can be used for SRAM and Shimano Compatibility Main Bolt: 8mm Alloy Main crank bolt for Install/Self-Extract Bottom Bracket Included: No, available separately Weight: 558gBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.