Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.Key Features:Available in 12x Chris King colours.,Unique Patent Pending compact straightline design for maximum airflow.,Simply push down to inflate.,Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.,Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve..
Our cleaning cloths are made using 100% natural and organic bamboo which can grow up to one metre per day without the need for fertilisers or chemicals. Our bamboo fabric is durable and highly absorbent as well as being naturally hypo-allergenic, antimicrobial and antibacterial.Why Not Microfibre?Microfibre cloths are made of plastic fibres derived from crude oil or natural gas. When washed, microfibre fabric can leak tens of thousands (even millions) of tiny microplastics into the washing machine water; this water inevitably makes its way into local waterways. In the environment, these microplastics can harm animals, Cause pollution and leach out dangerous chemicals.Key Features:Made from 100% natural organic bamboo.,Hypo-allergenic, antimicrobial and antibacterial.,Durable and highly absorbent.,3x cloths per pack (2 x grey, 1 x blue).,32cm x 32cmcloths..
Key Features:Available in 1.5mm & 3mm plug sizes.,6 plugs per pack, in 2 sheets of 3 plugs,Designed to fit perfectly into the body of peaty’s holeshot tubeless puncture plugger tool,Packaged using recycled cardbaord header cards and biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.Key FeaturesAvailable in 12x Chris King colours.,Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.,With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there.,Fork made from 316 stainless steel.,Body made from anodised 6061 aluminium.,Knurled body and ribbed lid / handle for extra grip.,Weather sealing o-rings make the tool waterproof when assembled.,Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs..
Whether you've lost a valve cap or just want to bling your existing pair of peaty's valves, this kit gives you everything you need.Package contents:1x spoke key cap (for 3.4mm spoke nipple).,1x valve core remover cap.,2x lock rings.,Compatible with all Peaty's Tubeless Valves..
With design, sustainability & quality running right to the core, there's only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.Instructions:Remove valve cap, o-ring and lock nut.,Insert valve through valve hole in rim.,Push the o-ring onto valve stem.,Thread the lock nut onto valve stem.,Hand tighten lock nut until firm.,Screw on valve cap..
Designed by pro riders, mechanics and scientists, Peaty’s Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.Fitting instructions:01) Remove tyre and any old rim tape,02) Clean and degrease rim thoroughly,03) Ensure rim is completely dry before application,04) Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air,05) Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut,06) Use a small spike to pierce the tape in the centre of the valve hole,07) Remove dust cap and Push valve through the valve hole,08) Apply lock ring tightly by hand, ensuring there are no air gaps,09) Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre,10) Ride!.
With design, sustainability & quality running right to the core, there's only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.INSTRUCTIONS:Remove valve cap, o-ring and lock nut.,Insert valve through valve hole in rim.,Push the o-ring onto valve stem.,Thread the lock nut onto valve stem.,Hand tighten lock nut until firm.,Screw on valve cap..
Peaty's have revamped the construction of their Shredsocks for 2020 to give maximum durability with minimum fuss.They're crew length with a sports cut shape with a ribbed leg and half terry padded footbed for those cased landings. Classic flat linked toe seams and arch support to keep your feet in check on long rides. Key Features: Made in the UK,Size: One Size (UK 7-11),Material: 75% cotton / 23% polyester / 2% elastane.