If you want the strongest, long lasting wheels, then you'll need to have tight and uniform spoke tension, and what better way to ensure they are tight than with the Park Tools TM1 - spoke tension meter Fitting almost any size, shape or material spoke the meter gives you a clear reading of the relative and and absolute spoke tension within a wheel. A must for every serious wheel builder.
The Park Tool BBT-9 Bottom Bracket and Crankarm Tool is used to remove and install 16-notch external bearing bottom bracket cups. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups, while the other end engages the 8 internal splines of the crank arm adjustment cap. This tool also fits Travativ Giga X-Pipes and Howitzer, Race Face X-type, SRAM and FSA Mega EXO bottom bracket cups.
The Park Tool VP1C Patch Kit includes six thin and flexible patches with tapered edges to blend with the tube s profile. Four round patches are 25mm in diameter for smaller holes. Two oval patches, 25mm x 35mm, are for wider cuts. A tube of self-vulcanizing fluid bonds the patch to the tube at the molecular level. Each kit is packaged in a small plastic box with sandpaper for cleaning the tube and instructions.
These Park Tool thoughtfully designed P-handled hex wrenches fit the task at hand, as well as they fit in your hand. The long shaft of each wrench is fitted with a Bondhus Balldriver for those hard to reach bolt heads. The short end of the wrench is neatly chamfered and extends from the handle for use when fully tightening bolts in high torque applications. Shaft lengths are optimally selected to minimize the wind-up and flex experienced with longer wrenches. The hex wrenches are made from high torque industrial steel and through hardened for long life. The offset P-handles are made from a durable nylon material and are ergonomically-designed for comfortable use.
The Park Tool HR11, HR12 and HR14 Hex Wrenches are necessary for removing the freehub bodies from several popular brands of hubs (Mavic, Sun Race, Sovos, and others).Park Tool HR11, HR12 and HR14 are through hardened industrial quality steel with chamfered tips for a precision fit.
The Park Tool IB2C features their unique I-Beam handle with 1.5, 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches; a T25 Torx compatible star-shaped driver; and a straight blade screwdriver. Strong, compact, and lightweight, the IB-2 is a great tool for taking on the road or trail.
Durability is the key to a good floor pump, after all it is going to take quite a beating in its lifetime. Equally at home in the garage, work shop or track side the Park Tool PFP8 is the must have for the keen rider. The sleek and stylish steel barrel not only improves efficiency at high pressures, it can also take the knocks and scrapes when you inevitably knock it over/throw it in the van/drop your bike on it. Plus with a stable steel base with large foot pads you can be sure to get good purchase when getting air in your tyres regardless of the ground underfoot.Durable Steel BarrelComposite Head With Thumb Lock Fits Presta, Schrader and DunlopComfortable Composite Handle
Many derailleur chains use a master link that allows the chain to be installed and removed by hand. While this type of master link doesn t require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. The Park Tool MLP1.2 Master Link Pliers make removal and replacement of these master links quick and effortless. Simply insert the specially sized jaws into the master link and squeeze the handles.
The Park Tool SW13C is a comfortable, vinyl dipped, two-sided Spoke Wrench. It's designed to easily access Mavic fittings. Fits both Mavic 9mm threaded eyelets and 7mm integrated nipples.
Introducing the Park Tool 10.3 Deluxe Repair Stand; a full-featured bicycle work stand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsRubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storageDurable, textured powder coat finishIntegrated height-adjustable parts trayHeight adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)Maximum weight capacity*: 36 kg Height adjustable from 39" to 57" (990 mm 1450 mm) using convenient quick-release leverBase when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 45" x 14.5" (1140 mm x 370 mm)Weight: 7.2kg (16lbs)*Please Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centred below the clamp and between the legs.The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes*.The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.
The Park Tool SS15C is designed and built especially for single speed bikes, a forged multi purpose ride saver. Combining a 15mm socket for axle nuts, 15mm open end spanner for pedals, the tool also doubles up as a tyre lever and bottle opener. Just the right size and length (17cm/7") to take along or to wrench in the garage, the "SS" is destined to be a single speeders favourite.
Park Tool SW15C 3 Way Internal Nipple Wrench uses our innovative 3-way Y wrench featuring three different sized wrenches to fit internal spoke nipples. Featuring a square drive, plus 5mm and 5.5mm hexes that slip perfectly into the tight surroundings of most rims. The SW15C works on wheels made by numerous manufacturers including, but not limited to: FSA, Blackwell, Planet-X, HED, Rolf, Bontrager, Campagnolo and Mavic.
When the conditions haven't been the best and your bike arrives home looking like it has been placed behind a muck spreader there is only one thing for it, a darn good clean! There is no need to get dirt under your finger nails as the Park Bike Cleaning Brush Set has been put together for you to get your bike looking its showroom finest! With 4 brushes designed for each specific area of your bike there won't be a spot that has been untouched.Official Park Tool Brush SetGear Clean Brush, Tapered Detail Brush, Frame Cleaning Sponge / Bristle Brush, Soft Bristle Soaping BrushErgonomically DesignedDual Density Sure Grip HandlesCovered By Park's Limited Lifetime Warranty
The Park Tool 106 Work Tray is a great work stand accessory designed to keep tools, lubes and spare parts right at your fingertips. Features large and small compartments, lube holder and a tool/towel bar along with two receiver pods for additional accessories. The #106 installs easily utilising Park's exclusive receiver pod accessory system found on the PRS-15, PCS-10 and PCS-11, as well as PCS-1, PCS-4 and PCS-9 when used with the 106-AC Accessory Collar. Perfect for the races, ride support or as a convenient way to keep tools and supplies handy. Accessory Collar Not Included.
The Park Tool RT1 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Strong, heat treated alloy steel with nickel finish.Fits 1 , 1-1/8 , 1-1/4 as well as some low profile and internal head cups.
This saw blade from Park Tool is specifically designed to cut carbon composite components such as handlebars, forks, seat posts etc. It will produce a smooth clean cut and will fit a Park Tool SAW-1 hacksaw and most 12 hacksaws. It can also be used in conjunction with the Park Tool SG-8 saw guide.Please note: This is not suitable for cutting aluminium components.
The Park Tool FRW1 Freewheel Remover Wrench securely holds freewheel and lockring tools (FR-1 through FR-8) for removal and installation. Features an investment cast head and a long, round, vinyl dipped handle for superior leverage.
Forged and precisely machined, the high leverage Park Tool LP-7 Utility Pliers include an integrated cutting blade and soft touch grips.Professional quality 7 inch, high leverage utility pliersIntegrated cutting blade incorporated into jawsForged, heat-treated Cr-Mo steel construction for years of useComfortable, dual density grips for comfort and convenienceCovered by Park Tool's legendary limited lifetime warranty
A great time saver for anyone who builds wheels, neatly designed to self-centre and drive conventional alloy or brass nipples during wheel lacing. The comfortable dual density grip delivers easy handling as the offset driver bit rotates on precision bronze bearings for a long, smooth running life. Works with rims up to 50 mm in depth.
The P-Handle Torx Compatible Wrench Set from Park Tool is a great versatile Torx wrench set that have been engineered to provide high quality easy to use tools. They have been constructed form high-torque industrial steel for superior performance and durability as you now come to expect from Park Tool.Torx compatible drivers at each endIncludes T6, T8, T10, T15, T20, T25, T30, and T40Comfortable, ergonomically designed nylon handles fit perfectly in your handDurable wall/pegboard mount tool holder allows easy access and organizationIdeal for your workshop or a home mechanic s tool kit this Torx wrench set will give you a perfect fit every time with its two drivers per wrench, a shorter driver on the handle and the longer driver for those hard to reach jobs. The nylon handle has been ergonomically designed to fit perfectly in your hand and provide a secure grip. It also comes with a holder which can be wall or pegboard mounted with easy to read size slots for each tool.