This P-handled hex wrench will fit your hand as well as the task it's designed forThe high strength nylon handle has an ergonomic shape to give maximum grip and comfortThe long shaft is fitted with a genuine Bondhus balldriver for those hard to reach bolt headsThe short end of the wrench is conveniently mounted into the handle for any high torque applicationsBondhus Protanium high torque industrial steel is used for long life
Key Features: Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners,Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigours of everyday use.
Key Features: Made from a carefully selected combination of Chrome Vanadium and S-2 tool steels,Unique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortless,Machined, chamfered tips allow easier insertion into hex fittings,Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy,Sliding T-handle creates increased leverage and multiple access positions.
Key Features: Made from a carefully selected combination of Chrome Vanadium and S-2 tool steels, Featuring an unique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortless,Sliding T-handle creates increased leverage and multiple access positions.
Key Features: The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors,The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact,Also included are eight installation drifts for pressing bearings into pre-installed cups,Organized in a convenient storage case,Full list of compatible bearing inner/outer diameters found on instructions/parts diagram,NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for useMade in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features: Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners,Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigours of everyday use.
Carry bag for PRS20 and PRS21 workstandIdeal for storing workstand when not in use
Key Features: 6mm Tool clip (bag of 5),Fits workshop toolboard QKBTB or QKSTB,Zinc plated,Safety end caps,Perfolock.
Part of a range of combination Headset wrenches that cover all bicycle requirementsThe Y-head design puts metal where it is needed for strength and durabilityThe laser-cut openings are a precise fit, as this operation takes place after the heat treatment processFeatures a 32 mm wrench for 1 inch Headsets, and 36 mm wrench for 1-1/8 inch Headsets
Part of a comprehensive range of freewheel removal toolsOversized centre hole and thin wall design allows use without removal of cones and locknutsInvestment cast and heat-treated for strength and durabilityOne-inch base fits end of SR-1, FRW-1 Park tools or simply an adjustable wrench or bench viceFits most four notch BMX freewheels including hubs with 14 mm oversize axles
Key Features:World famous Park Tool quality wrapped up in a combination metric wrench,Features both open and 12-point two-way ratcheting box ends,Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip,Strong, comfortable, and beautiful!,Covered by Park Tools Limited Lifetime Warranty.
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features: Industry standard cone wrenches with unmatched performance,The Y-head design puts material where it is needed for strength and durability,Military grade phosphate finish ensures an accurate fit and consistent quality,Thin enough to be used on the narrowest of cones,High strength tool steel,Long vinyl dipped handle for leverage and comfort,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Key Features: The HCW-16.3 is a combination 15mm pedal wrench and chain whip,Use for both pedal removal/installation and for cassette removal,Chain whip features improved compatibility with 5 speed to 12 speed mountain and road bike cassettes and freewheels,The HCW-16.3 is 10.75" long (27.3cm).
Key Features: Two-sided spoke wrench is designed for Mavic wheel sets.,Long handle gives good leverage for stubborn spoke nipples., Fits both Mavic 5.65 mm threaded eyelets and 7 mm integrated nipples., Made in the USA and covered by Park's legendary limited lifetime warranty.,
Small and handy, a 3.65 metre retracting tape measure with both Metric and Imperial measurement readings, all inside a tough composite housing.
Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to the threadsIncludes a 1 inch x 24 tpi cutting die, and a 1 inch cutting guide1-1/8 inch x 26 die, 1-1/4 inch x 26 die, 1-1/8 inch guide, and 1-1/4 inch guide are also available, and will fit the same handle
Key Features: A versatile and convenient way to keep tools, supplies and technology at arms length on a PRS-33 or PRS-33.2 Power Lift Repair Stand,The PRS-33TT solidly mounts directly to either side of the stand's upright at any height,Features: 19 tool holding holes, slots and small trays in a variety of shapes and sizes,14 (35cm) magnetic tool bar,Integrated mounting holes for PTH-1 Paper Towel Holder,Phone/tablet/clipboard holder,Pen and pencil holders,Adjustable utility hook to hang wheels, parts and scales,Height adjustable,Can be installed on a fully assembled stand.
A full-featured bicycle workstand designed and built for the home mechanicThe PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment,Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability,The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach,Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair, The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage, Durable, textured powder coat finish, Integrated height-adjustable parts tray, Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), Maximum weight capacity*: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever, Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) ,Folds down to 45 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs,.
A highly durable metal tool to remove and install Shimano HollowTech II integrated Bottom brackets and chainsets16 Laser cut splines securely engage the notches of the bottom bracket cups, while the other end fits the 8 internal splines of the crank arm adjustment capPlastic coated handle for a secure and comfortable gripWarning: this tool has a long handle and it is possible to damage the tool or the component by over-tightening during installationRecommended torque setting for bottom bracket cups: 35 - 50 NmRecommended torque setting for crank arm adjustment cap: 0.4 - 0.7 Nm