The Park Tool DCW series of cone wrenches is designed for the home mechanic or occasional user. They re made of thin steel and are nickel plated and heat treated for long use. Their small size makes them ideal to carry along for quick repairs.
The Park Tool DS1 Digital Scale is a versatile digital scale built to accurately weigh bikes, frames, and components. Uniquely designed to be clamped solidly into a repair stand or hung from a hook or branch. Measures in pounds to the ounce and kilograms to the hundredth. Includes a dual position, silicone coated hanging hook. Requires three AAA batteries which are not included. Maximum weight limit 25 kg (55 pounds).
The Park Tool DT3 accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS2 Professional Wheel Truing Stand. The DT3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor. Requires the TS2 Professional Wheel Truing Stand
The Park Tool SW-2A Clutch Wrench has been designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee Shadow Plus derailleurs and all previous Shadow Plus models. Includes 5.5mm and 3mm openings.
The Park Tool EWS-1 Electronic Wire 3-Way Tool is a handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy.Durable composite body is durable and prevents scratching of expensive componentsAngled Shimano; Di2; E-Tube; ends allow for both installation and removal in tight spacesUniversal coin cell tool helps remove and install battery covers on SRAM eTap
The Park Tool FAG2 Frame Alignment Gauge helps solve the problem of many bicycles not shifting or tracking properly. This can be the result of the front and rear wheels not being in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop-outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles.
The Park Tool FR2C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and fits Sun Tour two-notch freewheels. Not recommended for Sun Tour four to six notch freewheels.
This cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsAlways use a quick release skewer to hold the tool in place and snug to cogs when loosening; For solid axles, use the axle nutThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
The Park Tool FR7C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and fits Falcon freewheels.
The Park Tool HBH2 Handlebar Holder is designed to prevent the handlebar and front wheel from rotating when a bike is mounted in a Park Tool Repair Stand. Updated to fit handlebars with a diameter up to 32mm and oversized top tubes up to 50mm, the HBH2 works on almost any road or mountain bike.
The Park Tool HHP2 Head and Hanger Cup Press accurately aligns and presses 1 , 1-1/8 , 1-1/4 , and 1.5 headset cups. In addition, it presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed cup wrenches firmly in place when removing or installing adjustable-type bottom brackets. Features a quick-release design for fast tool installation and removal, extra long (30cm) handles for superior leverage, and stepped bushings for precise cup alignment.
The Park Tool HR11, HR12 and HR14 Hex Wrenches are necessary for removing the freehub bodies from several popular brands of hubs (Mavic, Sun Race, Sovos, and others).Park Tool HR11, HR12 and HR14 are through hardened industrial quality steel with chamfered tips for a precision fit.
Installing cables internally though your frame can test anyone s patience however with this Internal Cable Routing Kit from Park Tool you can get the job done efficiently without any stress.This kit can help you to route gear cables, electric wires, brake cables etc on any type of bike frame whether its carbon, aluminium, titanium etc. This kit has four plastic coated 250cm cables with magnets attached and each with a unique fitting for different cable types. There s also an external guide magnet which allows you to speed up the operation. Opposite polarity magnets on the cables will attach themselves inside the frame tube making it simple to route through the frame.To keep up with new technologies this kit now includes a dedicated e-tube Di2 cable connector that will easily pull through a 6mm frame hole. This makes it easy to route through the frame saving you valuable time and this kit can be used with any frame size including tandems.This kit includes:4 x Plastic coated 250cm Cables with magnetsUnique fittingsExternal Guide Magnet
The Park Tool LRT-4 is designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900 and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminium for a perfect fit and to prevent marring expensive parts.Machined flat face for optimal lockring engagementFor lockrings with 41mm outside diameter and 16 notches36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque6061 aluminium construction
The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.
This Ratcheting Wrench Set from Park Tool consists of 12 high quality open and two-way box end ratchet wrenches from with sizes ranging from 6mm up to 17mm.Each wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.Every wrench has also been finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench set which will last you a lifetime and help you to have the correct wrench for any task.This set includes the following sizes:MWR-6 6mmMWR-7 7mmMWR-8 8mmMWR-9 9mmMWR-10 10mmMWR-11 11mmMWR-12 12mmMWR-13 13mmMWR-14 14mmMWR-15 15mmMWR-16 16mmMWR-17 17mm
The Park Tool OBW3C Offset Brake Wrench 14mm Brake Centring Tool is called our offset wrench because of its unique design. This design allows it to be used in tight places, such as centring calliper brakes. OBW3C has a 14mm opening, and the other end fits into the tension springs to rotate the brake on its bolt.
The PCS4 workstand is a great addition to any keen cyclist or mountain biker's workshop that folds away when you need the space to bring the car into the garage or build that canoe you have always wished for. The PCS-4 is a heavy duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock solid, four-point leg system that folds together for storage, steel powder coated tubing, and a composite horizontal tube.
Here is the P-Handle Hex Wrench set from Park Tool consisting of eight high quality Hex Wrench s which have been thoughtfully constructed so that they best fit the task in hand.Straight hex shaft on the short side, ball end on the long sideComfortable, ergonomically designed nylon handles fit perfectly in your handDurable wall/pegboard mount tool holder allows easy access and organisationThese Hex Wrenches all have a Bondhus Balldriver end which will give you access to those awkwardly positioned bolts, even from an angle.The handles have been off-set and are made from durable nylon designed to perfectly fit your hand offering great comfort and a secure grip. Finally, the set comes with a holder which can be wall or pegboard mounted with easy to read size slots for each tool. These shop quality hex wrenches are a must have for any keen home mechanic as much as they are for the workshop. Includes: 2, 2.5, 3, 4, 5, 6, 8, 10mm hex wrenches and P-Handle Hex Wrench Holder.
The PRS25 workstand from Part Tool is a fantastic stand for putting up in the corner of the workshop as your "at home" stand or with it's easily foldable legs it is a great stand to have in the van as your trailside mate that is quick to put up and for those pre ride checks or quick fixes.Fully adjustable clamping pressureNarrow clamping jaws (2.7 inches / 7 cm) fit into tight areas or on short seat posts.360 degree clamp rotation