Features:The ultimate pro level full UD carbon monocoque time trial / triathlon aerobar as used by the top ProTeam professionals,Full one piece wind tunnel tested aerodynamic design UD carbon fibre monocoque construction gives a lightweight and stiff aerobar,31.8 mm oversized design further increases strength and stiffness,Curved reach adjustable UD carbon arm extensions for optimum positioning,Easy to adjust extension spacer system with internal cable routing port to adjust the height, can also be mounted under the bars,Two width positions for extension with included aero graphic to cover unused positioning holes,Gel padded arm rests with adjustable holders for optimum positioning,Full Internal gear and brake cable routing also suitable for Shimano Di2,Internal routing can also flow through the Missile EVO stem when used in conjunction with bars,UCI and ITU approved design,Width 40 cm centre-to-centre,Average weight 570 grams.
Key Features:Light enough? Think again.,The ultimate full carbon monocoque aero handlebar, as used by the pro peloton, just got lighter,The new VIBE Superlight Aero Handlebar is 45g lighter than the VIBE Carbon Aero Handlebar,Full one piece T800 UD carbon fibre monocoque construction gives a lightweight and stiff handlebar,Aerodynamic top section design cuts through the wind without sacrificing strength, stiffness or comfort,Fully internal cable routing options for brake and shift, perfect for Di2,Innegra™ fibres woven into the carbon lay up to add extra security to the construction,Weight - 40cm, 200g / 42cm, 205g.
The ultimate full carbon monocoque aero handlebar, as used by the pro peloton, just got lighter. With weight starting at only 200 grams the Vibe Superlight Aero Handlebar is 45 grams lighter than the Vibe Carbon Aero handlebar!Full one-piece T800 UD carbon constructionAerodynamic top sectionFully internal cable routing options for brake and shiftDrop: 136mm, reach: 80mmWeight: 40cm (200g), 42cm (205g)The Superlight aero handlebar from PRO features a full one-piece T800 UD carbon monocoque construction that gives a lightweight and stiff handlebar. Innegra fibres reinforce the most fragile areas of the handlebar without sacrificing weight, so it's ready for the toughest conditions. The aerodynamic top section design cuts through the wind without sacrificing strength, stiffness or comfort. Kitted out with integrated brake and shift-cable routing, the Vibe Superlight is compatible with Shimano Di2 shifting setups, concealing the cables for a neat and tidy look and feel. All of these great features make the PRO Vibe Superlight Aero Carbon handlebar a great performance upgrade for your bike.
The ultimate full carbon monocoque aero handlebar, as used by the pro peloton, just got lighter. With weight starting at only 200 grams the Vibe Superlight Aero Handlebar is 45 grams lighter than the Vibe Carbon Aero handlebar!Full one-piece T800 UD carbon constructionAerodynamic top sectionFully internal cable routing options for brake and shiftDrop: 136mm, reach: 80mmWeight: 40cm (200g), 42cm (205g)The Superlight aero handlebar from PRO features a full one-piece T800 UD carbon monocoque construction that gives a lightweight and stiff handlebar. Innegra fibres reinforce the most fragile areas of the handlebar without sacrificing weight, so it's ready for the toughest conditions. The aerodynamic top section design cuts through the wind without sacrificing strength, stiffness or comfort. Kitted out with integrated brake and shift-cable routing, the Vibe Superlight is compatible with Shimano Di2 shifting setups, concealing the cables for a neat and tidy look and feel. All of these great features make the PRO Vibe Superlight Aero Carbon handlebar a great performance upgrade for your bike.
Full carbon construction. No compromises.Super lightweight and stiff with an aerodynamically optimised design,Next evolution of PRO's Puzzle Clamping System for total security,Fully Di2 compatible,Reversable design, can be installed either +8° or -8° for a completely customisable ride,Weight from 120g,31.8mm clamping diameter,Available in 90 to 130mm lengths.
Key Features:Light enough? Think again.,The ultimate full carbon monocoque handlebar, as used by the pro peloton, just got lighter,The new VIBE Superlight Handlebar is 15% lighter than the standard VIBE bar,Full one piece T800 UD carbon fibre monocoque construction gives a lightweight and stiff handlebar,Ergonomic, 31.8 mm, oversized top section design further increases strength, stiffness and comfort,Fully internal cable routing options for brake and shift, perfect for Di2,Innegra™ fibres woven into the carbon layup add extra security to the construction,Weight - 40cm, 175g / 42cm, 180g / 44cm, 185g.
The PRO Tharsis Dropper Post is a lightweight 100mm, infinite-travel, dropper seatpost. Ideal for cross-country and endurance bikes.Lightweight cross-country and endurance mountain biking dropper seatpostFeaturing 100mm of infinite-travel3D forged alloy constructionTitanium boltsNew collarLighter cartridgeOval shaft inside shapeInternal cable routingDiameters: 27.2, 30.9 and 31.6mmWeight: from 405gDesigned to provide you with a better sports bicycle experience the PRO Tharsis Dropper Post is a dropper post for weight conscious cross-country or endurance mountain bikers. It features 100-millimetres of infinite-travel, internal cable routing and is available in three diameters; 27.2-, 30.9- and 31.6-millimetres. The 27.2-millimetre version boasts a 3D forged construction with an AL6061 alloy lower and an AL7050 alloy shaft, with titanium bolts; which ensures that it tips the scales at just 405-grams. The 30.9- and 31.6-millimetre versions likewise boast a 3D forged construction; but with AL7075 lowers and an AL7050 shaft. The Tharsis 3Five Dropper has a new 2-bolt saddle clamp.
The PRO Tharsis Dropper Post is a lightweight 100mm, infinite-travel, dropper seatpost. Ideal for cross-country and endurance bikes.Lightweight cross-country and endurance mountain biking dropper seatpostFeaturing 100mm of infinite-travel3D forged alloy constructionTitanium boltsNew collarLighter cartridgeOval shaft inside shapeInternal cable routingDiameters: 27.2, 30.9 and 31.6mmWeight: from 405gDesigned to provide you with a better sports bicycle experience the PRO Tharsis Dropper Post is a dropper post for weight conscious cross-country or endurance mountain bikers. It features 100-millimetres of infinite-travel, internal cable routing and is available in three diameters; 27.2-, 30.9- and 31.6-millimetres. The 27.2-millimetre version boasts a 3D forged construction with an AL6061 alloy lower and an AL7050 alloy shaft, with titanium bolts; which ensures that it tips the scales at just 405-grams. The 30.9- and 31.6-millimetre versions likewise boast a 3D forged construction; but with AL7075 lowers and an AL7050 shaft. The Tharsis 3Five Dropper has a new 2-bolt saddle clamp.
The answer for when gravel gets technical.Designed to provide you with a better sports’ bicycle experience the PRO Discover Dropper Post 70 is a drop-bar, or gravel bike, specific dropper seatpost. It features 70-millimetres of infinite travel, operated by a drop-bar style actuation lever, and boasting internal cable routing. Constructed with a 3D forged AL6061 alloy lower tube and shaft, with stainless-steel bolts, it has a 27.2-millimetre diameter and weighs 417-grams. Like all PRO saddles it makes use of an innovative 1 bolt clamping system, which provides a wide range of saddle angle adjustments, and is compatible with Shimano GRX shifters.Key Features:3D forged alloy head,Compatible with GRX,Internal cable routing,Single-bolt fixation for stress-free instillation,Weight: 417g,Diameter: 27.2mm,Length: 350mm.
For all-terrain adventurers who are looking to travel light without compromising performance, control or comfort. Lightweight and robust carbon fibre layup for stiffness and compliance in all the right areasKey Features:Ergonomically designed top-section, 20° flare and 5° backsweep for comfortable all-day cruising,Engineered to fully integrate either mechanical or Di2 groupsets,Optimised mid-section for lights, GPS mounts or GRX Sub-Brake Levers,Weight from 195g,Drop 110mm,Reach 75mm,Available in 40, 42 and 44cm widths.
The Stealth Superlight's state-of-the-art construction sees a one-piece design seamlessly integrating saddle and rails, resulting in a 15% weight reduction. Unique structure sheds 27g over the standard carbon version, tipping the scales at only 145gKey Features:Cutting-edge carbon weave pattern and precision fibre lay-up construction increases both stiffness and compliance,With increased compliance in the base, the padding and cover material have been upgraded to support sitbone comfort and alleviate pressure points in three main positions - on the hoods, drops and tops,The polyurethane cover, which sits over lightweight EVA foam, was tested with a variety of bib short materials to find the lowest friction rates between rider and saddle,The Stealth Superlight retains the original shape, a wide cut-out channel in the middle, offering extra comfort for riders on the edge,To retain saddle stiffness and power transfer the base includes horizontal reinforcement bridges, all part of the unique one-piece carbon reinforced base,Weight - 145g.
Equipped with large drops for taking up the most aerodynamic position possible, this carbon-made bar stays stiff and responsive as you steer your way to silverware, utilising innovative Innegra fibres to strengthen traditionally weaker sections. A comfortably shaped and sized top section with an oval centre-piece allows your hands to reach a natural position when riding taller, while the compact, narrow design lets you maintain a dynamic spot on every ride. Kitted out with integrated brake and shift-cable routing, this VIBE model is compatible with Shimano Di2 shifting setups, concealing the cables for a neat and tidy look and feel. Sleek and steady, this is an excellent choice of aerobar for the time-conscious rider.
Pro VIBE Superlight Aero Carbon HandlebarThis amazingly lightweight aero bar is compact and streamlined enough to shave vital seconds off your best time, when beating the clock. A comfortably shaped and sized top section with an oval centre-piece allows your hands to reach a natural position when riding taller, while the compact, narrow design lets you maintain a dynamic spot on every ride. Equipped with large drops for taking up the most aerodynamic position possible, this carbon-made bar stays stiff and responsive as you steer your way to silverware, utilising innovative Innegra fibres to strengthen traditionally weaker sections. Sleek and steady, this is an excellent choice of aerobar for the time-conscious rider. Kitted out with integrated brake and shift-cable routing, this VIBE model is compatible with Shimano Di2 shifting setups, concealing the cables for a neat and tidy look and feel.Features: Rail: Titanium Dimensions: 138x282mm Use: Road Superior strength Advanced ergonomic technology Better posture Superflow cutout relieves pressure Long-lasting comfort Weight: 288g (approx) Buy Pro components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features:UD carbon oval shaped aerodynamic aerobar extensions,For stretched wrist, low frontal area arm position,10 position holes, 5 degree inward and 12 degree upward tip,Round 19.4mm inner diameter for Di2 or other shifting cables,Weight: 142 g.
Pro Koryak Internal MTB Dropper SeatpostMade to provide comfort and composure through every section of your varied terrain adventures, this dynamic dropper post is always right where you need it to be, however intense your ride gets. Constructed from a reliably strong alloy, this Koryak model by Pro drops and rises with a flick of the shifter-style switch, resulting in an efficient and effective performance on every outing. Equipped with deep travel, internal cable-routing and zero-offset, this is perfect for the venturesome trail rider. Features: Material: 3D forged AL-2024 Alloy Offset: 0mm Included: Shifter-style remote leverBuy Pro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The PRO Team Digital Torque Wrench ensures that you will never overtighten a nut or bolt again - featuring a ratchet system with a digital strain gauge and an LCD displayIt boasts a 1-20Nm torque range, can measure in ft-lb, in-lb and kg-cm, as well as Nm, and has an accuracy of ±3%The Team Digital Torque Wrench's simple to use controls allow you to pre-set the required torque, for the part you are tightening, and a warning beep will alert you, along with a visual indicator on the LCD screen, of when you have reached that valueIt is sold in a blow-mould protective case with nine tool bits, including 2/2.5/3/4/5/6 hex, T20/T25 and a ¼ inch adaptor, to ensure ease of use
Pro Koryak Internal MTB Dropper SeatpostMade to provide comfort and composure through every section of your varied terrain adventures, this dynamic dropper post is always right where you need it to be, however intense your ride gets. Constructed from a reliably strong alloy, this Koryak model by Pro drops and rises with a flick of the shifter-style switch, resulting in an efficient and effective performance on every outing. Equipped with deep travel, internal cable-routing and zero-offset, this is perfect for the venturesome trail rider. Features: Material: 3D forged AL-2024 Alloy Offset: 0mm Included: Shifter-style remote leverBuy Pro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The PRO Tharsis 160mm Dropper Seatpost is a lightweight, infinite long-travel dropper seatpost. Available in a 160mm travel option, with internal cable routing, it features a full alloy cartridge and an alloy body to ensure it is lightweight and robust. Weight reductions are further enhanced by the use of an oval stanchion shape and a traditional two-bolt style, 3D forged alloy, head with titanium hardware. The Tharsis Dropper Seatpost 160 is available in 30.9 and 31.6mm diameters. Features: 160mm of infinite travel 3D forged alloy construction Titanium bolts New collar design Oval stanchion inside shape Internal cable routing Diameter: 30.9mm or 31.6mm Weight: from 495g
The PRO Tharsis 160mm Dropper Seatpost is a lightweight, infinite long-travel dropper seatpost. Available in a 160mm travel option, with internal cable routing, it features a full alloy cartridge and an alloy body to ensure it is lightweight and robust. Weight reductions are further enhanced by the use of an oval stanchion shape and a traditional two-bolt style, 3D forged alloy, head with titanium hardware. The Tharsis Dropper Seatpost 160 is available in 30.9 and 31.6mm diameters. Features: 160mm of infinite travel 3D forged alloy construction Titanium bolts New collar design Oval stanchion inside shape Internal cable routing Diameter: 30.9mm or 31.6mm Weight: from 495g
Pro Koryak Internal MTB Dropper SeatpostMade to provide comfort and composure through every section of your varied terrain adventures, this dynamic dropper post is always right where you need it to be, however intense your ride gets. Constructed from a reliably strong alloy, this Koryak model by Pro drops and rises with a flick of the shifter-style switch, resulting in an efficient and effective performance on every outing. Equipped with deep travel, internal cable-routing and zero-offset, this is perfect for the venturesome trail rider. Features: Material: 3D forged AL-2024 Alloy Offset: 0mm Included: Shifter-style remote leverBuy Pro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.