O'Neal Session SPD MTB ShoesWith all the features you need for a great mountain bike ride, the O'Neal Session SPD MTB Shoes offer impressive comfort, efficient pedalling and tough construction to meet the demands of the roughest of trails. From high-speed turns to technical chutes to steep rock rolling trails, the Session SPD MTB Shoes keep you firmly and comfortably planted on the pedals. The PU upper with mesh ventilation zones gives you the very best combination of durability and ventilation. There's also a neoprene ankle sock, locking out dirt and debris from your shoes. And for those rock series and hidden tree stumps that can hit toes, the Session shoes fend it all off with reinforced toe and heel zones. Dial in the ComfortWhen you're mountain biking you don't want a sloppy fitting shoe. Not a problem here, the Session shoes use an Atop dial to make sure there is no sloppiness in the fit.A simple twist of the dial gives you incrementally increasing pressure, letting you get the fit just as you like it and holding your foot secure when pedalling. It's a quick, fuss-free way to get the right fit. Hexagon Honey Rubber® SoleThe SPD compatibility and Hexagon Honey Rubber® construction make sure you'll always pedal efficiently. The Hexagon Honey Rubber® allows you to get a reassuring pedal purchase, even if you can't immediately clip in.A nylon skank reinforcement offers excellent power transfer once you're clipped in, perfect for bursts of speed out of berms and attacking uphill sections of trail. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. FeaturesHexagon Honey Rubber® sole compatible for SPD cleatUpper shoe construction includes a neoprene gator sock to keep debris out of your shoeDurable and lightweight PU upper with mesh side ventilationDial ratchet closure system for a more secure fastening and rapid openingRemovable and interchangeable foot-bedReinforced toe cap and heel for added protectionAdditional side outsole stitching for reinforcement and increased durability2-bolt cleat compatible (cleats not supplied)Buy O'Neal Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
O'Neal Session SPD MTB ShoesWith all the features you need for a great mountain bike ride, the O'Neal Session SPD MTB Shoes offer impressive comfort, efficient pedalling and tough construction to meet the demands of the roughest of trails. From high-speed turns to technical chutes to steep rock rolling trails, the Session SPD MTB Shoes keep you firmly and comfortably planted on the pedals. The PU upper with mesh ventilation zones gives you the very best combination of durability and ventilation. There's also a neoprene ankle sock, locking out dirt and debris from your shoes. And for those rock series and hidden tree stumps that can hit toes, the Session shoes fend it all off with reinforced toe and heel zones. Dial in the ComfortWhen you're mountain biking you don't want a sloppy fitting shoe. Not a problem here, the Session shoes use an Atop dial to make sure there is no sloppiness in the fit.A simple twist of the dial gives you incrementally increasing pressure, letting you get the fit just as you like it and holding your foot secure when pedalling. It's a quick, fuss-free way to get the right fit. Hexagon Honey Rubber® SoleThe SPD compatibility and Hexagon Honey Rubber® construction make sure you'll always pedal efficiently. The Hexagon Honey Rubber® allows you to get a reassuring pedal purchase, even if you can't immediately clip in.A nylon skank reinforcement offers excellent power transfer once you're clipped in, perfect for bursts of speed out of berms and attacking uphill sections of trail. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. FeaturesHexagon Honey Rubber® sole compatible for SPD cleatUpper shoe construction includes a neoprene gator sock to keep debris out of your shoeDurable and lightweight PU upper with mesh side ventilationDial ratchet closure system for a more secure fastening and rapid openingRemovable and interchangeable foot-bedReinforced toe cap and heel for added protectionAdditional side outsole stitching for reinforcement and increased durability2-bolt cleat compatible (cleats not supplied)Buy O'Neal Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
When you're mountain bike legend Greg Minnaar you know a thing or two about what you want from your MTB kit. And that experience has been fully utilised in the development of the Legacy Mountain Bike Pants. When you're riding steep and technical terrain and getting way over the back wheel, the stretch panels across the thigh, the top of the seat and waist area waist and around the ankle make sure you enjoy the total freedom needed to move and react to the quickly changing terrain. The pre-curved leg construction also takes into account aggressive riding positions while a raised back waistband offers extended coverage. Trail-ready durability comes by the way of an abrasion-resistant seat panel, toughening up an area prone to rubbing from the saddle and muddy grit. And to combat chain rub, an abrasion-resistant Amara synthetic leather is used to the ankle on the chainring side. The pants are easily adjusted for the perfect fit via Velcro® waist tabs - cinch in and shred. The double snap closure at the waist also adds a reassuringly secure fit. Whether racing your mates or racing Greg Minnaar, these modern MTB trousers won't let you down when you're heading downhill.
O'Neal Legacy MTB PantsDeveloped in conjunction with downhill MTB legend Greg Minnaar, the O'Neal Legacy MTB Pants are your ultimate downhill riding and racing pant made to be tough, flexible and supremely comfortable.When you're mountain bike legend Greg Minnaar you know a thing or two about what you want from your MTB kit. And that experience has been fully utilised in the development of the Legacy Mountain Bike Pants.When you're riding steep and technical terrain and getting way over the back wheel, the stretch panels across the thigh, the top of the seat and waist area waist and around the ankle make sure you enjoy the total freedom needed to move and react to the quickly changing terrain. The pre-curved leg construction also takes into account aggressive riding positions while a raised back waistband offers extended coverage. Trail-ready durability comes by the way of an abrasion-resistant seat panel, toughening up an area prone to rubbing from the saddle and muddy grit. And to combat chain rub, an abrasion-resistant Amara synthetic leather is used to the ankle on the chainring side.The pants are easily adjusted for the perfect fit via Velcro® waist tabs - cinch in and shred. The double snap closure at the waist also adds a reassuringly secure fit. Whether racing your mates or racing Greg Minnaar, these modern MTB trousers won't let you down when you're heading downhill.FeaturesMaterials: 100% PolyesterDesigned in collaboration with 3-time UCI DH World Champion Greg MinnaarStretch panels on thighs, top of seat/ waist and ankles for improved freedom-of-movementAbrasion-resistant seat panelsAmara synthetic leather chainring-side abrasion-resistant patchPadded back waistband for added comfortPre-curved leg tailoring and high back waistband for great on-bike fit and comfortLaser-cut ventilation holes on the inside of the thighsStreamlined design for aerodynamics while riding / racing DHDouble-popper waist closure with side Velcro adjustment for a secure snug fitBuy O'Neal Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
O'Neal Legacy MTB PantsDeveloped in conjunction with downhill MTB legend Greg Minnaar, the O'Neal Legacy MTB Pants are your ultimate downhill riding and racing pant made to be tough, flexible and supremely comfortable.When you're mountain bike legend Greg Minnaar you know a thing or two about what you want from your MTB kit. And that experience has been fully utilised in the development of the Legacy Mountain Bike Pants.When you're riding steep and technical terrain and getting way over the back wheel, the stretch panels across the thigh, the top of the seat and waist area waist and around the ankle make sure you enjoy the total freedom needed to move and react to the quickly changing terrain. The pre-curved leg construction also takes into account aggressive riding positions while a raised back waistband offers extended coverage. Trail-ready durability comes by the way of an abrasion-resistant seat panel, toughening up an area prone to rubbing from the saddle and muddy grit. And to combat chain rub, an abrasion-resistant Amara synthetic leather is used to the ankle on the chainring side.The pants are easily adjusted for the perfect fit via Velcro® waist tabs - cinch in and shred. The double snap closure at the waist also adds a reassuringly secure fit. Whether racing your mates or racing Greg Minnaar, these modern MTB trousers won't let you down when you're heading downhill.FeaturesMaterials: 100% PolyesterDesigned in collaboration with 3-time UCI DH World Champion Greg MinnaarStretch panels on thighs, top of seat/ waist and ankles for improved freedom-of-movementAbrasion-resistant seat panelsAmara synthetic leather chainring-side abrasion-resistant patchPadded back waistband for added comfortPre-curved leg tailoring and high back waistband for great on-bike fit and comfortLaser-cut ventilation holes on the inside of the thighsStreamlined design for aerodynamics while riding / racing DHDouble-popper waist closure with side Velcro adjustment for a secure snug fitBuy O'Neal Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
O'Neal Legacy MTB PantsDeveloped in conjunction with downhill MTB legend Greg Minnaar, the O'Neal Legacy MTB Pants are your ultimate downhill riding and racing pant made to be tough, flexible and supremely comfortable.When you're mountain bike legend Greg Minnaar you know a thing or two about what you want from your MTB kit. And that experience has been fully utilised in the development of the Legacy Mountain Bike Pants.When you're riding steep and technical terrain and getting way over the back wheel, the stretch panels across the thigh, the top of the seat and waist area waist and around the ankle make sure you enjoy the total freedom needed to move and react to the quickly changing terrain. The pre-curved leg construction also takes into account aggressive riding positions while a raised back waistband offers extended coverage. Trail-ready durability comes by the way of an abrasion-resistant seat panel, toughening up an area prone to rubbing from the saddle and muddy grit. And to combat chain rub, an abrasion-resistant Amara synthetic leather is used to the ankle on the chainring side.The pants are easily adjusted for the perfect fit via Velcro® waist tabs - cinch in and shred. The double snap closure at the waist also adds a reassuringly secure fit. Whether racing your mates or racing Greg Minnaar, these modern MTB trousers won't let you down when you're heading downhill.FeaturesMaterials: 100% PolyesterDesigned in collaboration with 3-time UCI DH World Champion Greg MinnaarStretch panels on thighs, top of seat/ waist and ankles for improved freedom-of-movementAbrasion-resistant seat panelsAmara synthetic leather chainring-side abrasion-resistant patchPadded back waistband for added comfortPre-curved leg tailoring and high back waistband for great on-bike fit and comfortLaser-cut ventilation holes on the inside of the thighsStreamlined design for aerodynamics while riding / racing DHDouble-popper waist closure with side Velcro adjustment for a secure snug fitBuy O'Neal Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
O'Neal Legacy MTB PantsDeveloped in conjunction with downhill MTB legend Greg Minnaar, the O'Neal Legacy MTB Pants are your ultimate downhill riding and racing pant made to be tough, flexible and supremely comfortable.When you're mountain bike legend Greg Minnaar you know a thing or two about what you want from your MTB kit. And that experience has been fully utilised in the development of the Legacy Mountain Bike Pants.When you're riding steep and technical terrain and getting way over the back wheel, the stretch panels across the thigh, the top of the seat and waist area waist and around the ankle make sure you enjoy the total freedom needed to move and react to the quickly changing terrain. The pre-curved leg construction also takes into account aggressive riding positions while a raised back waistband offers extended coverage. Trail-ready durability comes by the way of an abrasion-resistant seat panel, toughening up an area prone to rubbing from the saddle and muddy grit. And to combat chain rub, an abrasion-resistant Amara synthetic leather is used to the ankle on the chainring side.The pants are easily adjusted for the perfect fit via Velcro® waist tabs - cinch in and shred. The double snap closure at the waist also adds a reassuringly secure fit. Whether racing your mates or racing Greg Minnaar, these modern MTB trousers won't let you down when you're heading downhill.FeaturesMaterials: 100% PolyesterDesigned in collaboration with 3-time UCI DH World Champion Greg MinnaarStretch panels on thighs, top of seat/ waist and ankles for improved freedom-of-movementAbrasion-resistant seat panelsAmara synthetic leather chainring-side abrasion-resistant patchPadded back waistband for added comfortPre-curved leg tailoring and high back waistband for great on-bike fit and comfortLaser-cut ventilation holes on the inside of the thighsStreamlined design for aerodynamics while riding / racing DHDouble-popper waist closure with side Velcro adjustment for a secure snug fitBuy O'Neal Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
O'Neal Legacy MTB PantsDeveloped in conjunction with downhill MTB legend Greg Minnaar, the O'Neal Legacy MTB Pants are your ultimate downhill riding and racing pant made to be tough, flexible and supremely comfortable.When you're mountain bike legend Greg Minnaar you know a thing or two about what you want from your MTB kit. And that experience has been fully utilised in the development of the Legacy Mountain Bike Pants.When you're riding steep and technical terrain and getting way over the back wheel, the stretch panels across the thigh, the top of the seat and waist area waist and around the ankle make sure you enjoy the total freedom needed to move and react to the quickly changing terrain. The pre-curved leg construction also takes into account aggressive riding positions while a raised back waistband offers extended coverage. Trail-ready durability comes by the way of an abrasion-resistant seat panel, toughening up an area prone to rubbing from the saddle and muddy grit. And to combat chain rub, an abrasion-resistant Amara synthetic leather is used to the ankle on the chainring side.The pants are easily adjusted for the perfect fit via Velcro® waist tabs - cinch in and shred. The double snap closure at the waist also adds a reassuringly secure fit. Whether racing your mates or racing Greg Minnaar, these modern MTB trousers won't let you down when you're heading downhill.FeaturesMaterials: 100% PolyesterDesigned in collaboration with 3-time UCI DH World Champion Greg MinnaarStretch panels on thighs, top of seat/ waist and ankles for improved freedom-of-movementAbrasion-resistant seat panelsAmara synthetic leather chainring-side abrasion-resistant patchPadded back waistband for added comfortPre-curved leg tailoring and high back waistband for great on-bike fit and comfortLaser-cut ventilation holes on the inside of the thighsStreamlined design for aerodynamics while riding / racing DHDouble-popper waist closure with side Velcro adjustment for a secure snug fitBuy O'Neal Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lightweight, well-vented, Enduro full-face helmet,Maximum airflow and cooling with multiple oversized vents and connected air channels,Glossy finish,Durable multi-colored graphics,Padded comfort liner, removable, sweat absorbing and washable,O'Neal Fidlock® magnetic buckle (engineered in Germany) for easy, single-handed fastening and release, provides maximum security while riding,Incorporating IPX® ACells rotational impact absorption technology. Designed to reduce head injuries caused by rotational impacts during crashing,Airflaps™ compatible,Meets EN1078 safety standard for bicycle helmets and meets ASTM downhill standard.
Key Features: Lightweight, well-vented, Enduro full-face helmet,Multiple oversized vents for maximum airflow and cooling,Matte finish,Durable multi-colored graphics,Ultra-plush removable, sweat absorbing and washable padded inner liner,O'Neal Fidlock® magnetic buckle (engineered in Germany) for easy, single-handed fastening and release, provides maximum security while riding,Incorporating IPX® ACells rotational impact absorption technology. Designed to reduce head injuries caused by rotational impacts during crashing,Airflaps™ compatible,Exceeds EN1078 safety standard for bicycle helmets and meets ASTM downhill standard.
If you're looking for an incredibly strong and durable helmet that's going to keep your brain protected while you tear up the track, the O'Neal Blade Polyacrylite Race Helmet is the one. A highly developed helmet with 2 outshells and 2 EPS for increased safety and the perfect fit, the shell is constructed from ABS and has multiple oversized vents for maximum airflow and cooling. Durable multi-colorued graphics and a Coolmax padded inner lining with antibacterial Polygiene treatment, ultra-plush, removable, sweat absorbing and washable. Emergency Pull straps on the cheek pads make for really easy and safe removal. An O'Neal Fidlock magnetic buckle (engineered in Germany) is in place for easy, single-handed fastening and release. To provide maximum security while riding, goggles rest securely in place on ridge at back of shell. Lastly the Blade comes equipped with pre-installed plastic break-away visor screws for improved safety in terms of crashing. GoPro mount included. Size guide: X-Small: 20-1/2" - 21-1/8" Small: 21-1/4" - 22-1/8" Medium: 22-3/8" - 23-1/8" Large: 23-1/4" - 23-3/4" X-Large: 23-7/8" - 24-3/4"
If you're looking for an incredibly strong and durable helmet that's going to keep your brain protected while you tear up the track, the O'Neal Blade Polyacrylite Race Helmet is the one. A highly developed helmet with 2 outshells and 2 EPS for increased safety and the perfect fit, the shell is constructed from ABS and has multiple oversized vents for maximum airflow and cooling. Durable multi-colorued graphics and a Coolmax padded inner lining with antibacterial Polygiene treatment, ultra-plush, removable, sweat absorbing and washable. Emergency Pull straps on the cheek pads make for really easy and safe removal. An O'Neal Fidlock magnetic buckle (engineered in Germany) is in place for easy, single-handed fastening and release. To provide maximum security while riding, goggles rest securely in place on ridge at back of shell. Lastly the Blade comes equipped with pre-installed plastic break-away visor screws for improved safety in terms of crashing. GoPro mount included. Size guide: X-Small: 20-1/2" - 21-1/8" Small: 21-1/4" - 22-1/8" Medium: 22-3/8" - 23-1/8" Large: 23-1/4" - 23-3/4" X-Large: 23-7/8" - 24-3/4"
If you're looking for an incredibly strong and durable helmet that's going to keep your brain protected while you tear up the track, the O'Neal Blade Polyacrylite Race Helmet is the one. A highly developed helmet with 2 outshells and 2 EPS for increased safety and the perfect fit, the shell is constructed from ABS and has multiple oversized vents for maximum airflow and cooling. Durable multi-colorued graphics and a Coolmax padded inner lining with antibacterial Polygiene treatment, ultra-plush, removable, sweat absorbing and washable. Emergency Pull straps on the cheek pads make for really easy and safe removal. An O'Neal Fidlock magnetic buckle (engineered in Germany) is in place for easy, single-handed fastening and release. To provide maximum security while riding, goggles rest securely in place on ridge at back of shell. Lastly the Blade comes equipped with pre-installed plastic break-away visor screws for improved safety in terms of crashing. GoPro mount included. Size guide: X-Small: 20-1/2" - 21-1/8" Small: 21-1/4" - 22-1/8" Medium: 22-3/8" - 23-1/8" Large: 23-1/4" - 23-3/4" X-Large: 23-7/8" - 24-3/4"
The O'Neal Blade Helmet Black has a lightweight 2-shell fiberglass construction for perfect individual fit, oversized vents for maximum airflow and cooling and sweat-absorbing and removablewashable inner liner. Features a height adjustable visor, O'Neal Fidlock magnetic buckle for easy, single-handed fastening and release with durable multi-colored clear-coated graphics. GoPro mount included. Size Guide: X-Small: 20-1/2" - 21-1/8" (54cm) Small: 21-1/4" - 22-1/8" (56cm) Medium: 22-3/8" - 23-1/8" (58cm) Large: 23-1/4" - 23-3/4" (60cm) X-Large: 23-7/8" - 24-3/4" (62cm)
Lightweight fibreglass 2-shell construction makes the O'Neal Blade Helmet durable, lightweight and perfect fitting. It boasts oversized vents to allow as much air in as possible while venting hot air out towards the rear of the helmet. The Blade Helmet is lined with a sweat-absorbing liner that can be fully removed for washing to keep it feeling fresh. An O'Neal Fidlock magnetic buckle designed for single-handed fastening and release gets you locked in quicker than ever! Size guide: X-Small: 20-1/2" - 21-1/8" Small: 21-1/4" - 22-1/8" Medium: 22-3/8" - 23-1/8" Large: 23-1/4" - 23-3/4" X-Large: 23-7/8" - 24-3/4"
The O'Neal Blade Helmet Black has a lightweight 2-shell fiberglass construction for perfect individual fit, oversized vents for maximum airflow and cooling and sweat-absorbing and removablewashable inner liner. Features a height adjustable visor, O'Neal Fidlock magnetic buckle for easy, single-handed fastening and release with durable multi-colored clear-coated graphics. GoPro mount included. Size Guide: X-Small: 20-1/2" - 21-1/8" (54cm) Small: 21-1/4" - 22-1/8" (56cm) Medium: 22-3/8" - 23-1/8" (58cm) Large: 23-1/4" - 23-3/4" (60cm) X-Large: 23-7/8" - 24-3/4" (62cm)
The O'Neal Hyperlite IPX helmet features a lightweight fiberglass construction paired with multiple oversized vents for maximum airflow and cooling. A Dri-Lex padded inner liner features an antibacterial polygiene treatment, it's ultra-plush, removable, sweat absorbing and washable. It features emergency pull straps on the cheek pads for easy and quick removal. The O'Neal Fidlock magnetic buckle allows for easy, single-handed fastening and release to provide maximum security while riding. Size guide: X-Small: 20-1/2" - 21-1/8" Small: 21-1/4" - 22-1/8" Medium: 22-3/8" - 23-1/8" Large: 23-1/4" - 23-3/4" X-Large: 23-7/8" - 24-3/4"
Lightweight fibreglass 2-shell construction makes the O'Neal Blade Helmet durable, lightweight and perfect fitting. It boasts oversized vents to allow as much air in as possible while venting hot air out towards the rear of the helmet. The Blade Helmet is lined with a sweat-absorbing liner that can be fully removed for washing to keep it feeling fresh. An O'Neal Fidlock magnetic buckle designed for single-handed fastening and release gets you locked in quicker than ever! Size guide: X-Small: 20-1/2" - 21-1/8" Small: 21-1/4" - 22-1/8" Medium: 22-3/8" - 23-1/8" Large: 23-1/4" - 23-3/4" X-Large: 23-7/8" - 24-3/4"