Nukeproof Shimano Deore M515-M525-Tektro Pads 4PkCustom-manufactured in Taiwan to our exacting standards, The Nukeproof brake pad range now feature's Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems. We are offering selected pads in Sintered and organic compounds as packs of 4 pairs. Tested to their limit in all possible conditions by some of the world's toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation.Features: Organic: Good initial bite, very short bed-in time, low noise Sintered: High heat resistance, superior performance in wet and dry conditions, strong and consistent braking over a wide rangeof speeds Built For: AM/XC/DH/FR Compatible with: Shimano M395, M415, M416, M445, M465, M475, M485, M486, M495,M501, M506, M515, M525, M575, T615; Quad Sting, Rapide, Nano; Tektro Auriga, Aquila, Dorado, Draco, Gemini, HDC; TRP Hylex, HYDR, Spyre; Giant MPH; RST D-Power 4 pairs of padsClick HERE for compatibility chartBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon SL SaddleDesigned with the help of Nukeproof DH (downhill) & Enduro Pro Riders, the Nukeproof Horizon SL Saddle ensures riders experience superior comfort combined with lightweight performance.Optimised Pedaling Position and Tyre ClearanceThe ergonomic design was achieved using a combination of different densities of super-light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable.Features:Material: Glassfibre-reinforced Nylon (base), Microfibre (cover)Padding: Dual-density lightweight foamDimensions: 134mm x 260mmRails: CrMo (Chromoly)Intended Use: Trail, All Mountain, Enduro, Downhill, FreerideBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon SL SaddleDesigned with the help of Nukeproof DH (downhill) & Enduro Pro Riders, the Nukeproof Horizon SL Saddle ensures riders experience superior comfort combined with lightweight performance.Optimised Pedaling Position and Tyre ClearanceThe ergonomic design was achieved using a combination of different densities of super-light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable.Features:Material: Glassfibre-reinforced Nylon (base), Microfibre (cover)Padding: Dual-density lightweight foamDimensions: 134mm x 260mmRails: CrMo (Chromoly)Intended Use: Trail, All Mountain, Enduro, Downhill, FreerideBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon SL SaddleDesigned with the help of Nukeproof DH (downhill) & Enduro Pro Riders, the Nukeproof Horizon SL Saddle ensures riders experience superior comfort combined with lightweight performance.Optimised Pedaling Position and Tyre ClearanceThe ergonomic design was achieved using a combination of different densities of super-light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable.Features:Material: Glassfibre-reinforced Nylon (base), Microfibre (cover)Padding: Dual-density lightweight foamDimensions: 134mm x 260mmRails: CrMo (Chromoly)Intended Use: Trail, All Mountain, Enduro, Downhill, FreerideBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon SL SaddleDesigned with the help of Nukeproof DH (downhill) & Enduro Pro Riders, the Nukeproof Horizon SL Saddle ensures riders experience superior comfort combined with lightweight performance.Optimised Pedaling Position and Tyre ClearanceThe ergonomic design was achieved using a combination of different densities of super-light foam to offer maximum comfort without increasing weight. It is curved up at the rear to hold the rider in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished in a durable vacuum formed water repellent microfibre cover so that even on wet days it will be comfortable.Features:Material: Glassfibre-reinforced Nylon (base), Microfibre (cover)Padding: Dual-density lightweight foamDimensions: 134mm x 260mmRails: CrMo (Chromoly)Intended Use: Trail, All Mountain, Enduro, Downhill, FreerideBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon SL CrMo RailDesigned with the help from Nukeproof downhill (DH) and enduro pro riders, this mountain bike (MTB) saddle ensures riders experience superior comfort combined with lightweight performance. It features an ergonomic design that uses a combination of different densities of super-light foam to offer maximum comfort without increasing weight. Another highlight is its curved rear section that's designed to hold you in an optimised pedalling position on long climbs and to provide more tyre clearance for longer travel bikes. It has been finished with a durable vacuum-formed water repellent microfibre cover so that even on wet days it will be comfortable.Features: Cover Material: Microfibre Shell Material: Glassfibre-reinforced Nylon Rails Material: Chromoly (CrMo) Steel Padding: Dual-density lightweight foam Use: Trail, All Mountain (AM), Enduro, Downhill (DH), Freeride (FR) Dimensions: 134x260mm (WxL)Manufacturer's Part Number: 80194500020Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Bottom Bracket GXPPrepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated BearingsAll set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket GXP is an excellent upgrade for riders who want a reliable component on tough mountain bike rides.Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Click here to view how to replace your SRAM GXP Bottom Bracket.Click here to view and download our Nukeproof Technical Manual BSA 83mm GXP to ensure compatibility.Click here to view and download our Nukeproof Technical Manual BSA 68 73mm GXP to ensure compatibility.InstallationA Shimano Hollowtech II type tool is required for installation - 16 notch 44mm OD. available hereFeatures: Cup Material: Alloy Bearing Material: Titanium coated race bearings Ball Material: Stainless-Steel Finish: Anodised Use: MTB Compatibility: SRAM GXP Thread: BSA 1.37"x24 TPI Certification: ABEC 5Manufacturer Part Numbers: Black 83mm: NUKTK878GM-83-TSBB Black 68-73mm: NUKTK878GM-TSBB Blue 68-73mm: NUKTK878GM-TSBBBLU Blue 83mm: NUKTK878GM-83-TSBBBLU Copper 68-73mm: NUKTK878GM-TSBBCOP Copper 83mm: NUKTK878GM-83-TSBBCOP Grey 68-73mm: NUKTK878GM-TSBBGRY Grey 83mm: NUKTK878GM-83-TSBBGRY Purple 68-73mm: NUKTK878GM-TSBBPUR Purple 83mm: NUKTK878GM-83-TSBBPUR Red 68-73mm: NUKTK878GM-TSBBRED Red 83mm: NUKTK878GM-83-TSBBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Custom-manufactured in Taiwan to our exacting standards, the Nukeproof brake pad range now features Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems.We are offering selected pads in Sintered and Organic compounds as packs of 4 pairs.Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry.No nonsense, High quality, High power braking with excellent modulation.Key Features:Organic: Good initial bite, Very short bed-in time, Low noise,Sintered: High heat resistance, Superior performance in wet and dry conditions, Strong and consistent braking over a wide range of speeds,Built For: AM/XC/DH/FR,Compatible with: Avid Trail and Guide Series brakes.
Custom-manufactured in Taiwan to our exacting standards, The Nukeproof brake pad range now feature’s Organic, Semi-metallic and Sintered compounds mounted on steel backing plates for excellent heat dissipation and are available to fit all major brake systems.We are offering selected pads in Sintered and organic compounds as packs of 4 pairs. Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation.Key Features:Organic: Good initial bite, Very short bed-in time, low noise,Sintered: High heat resistance, superior performance in wet and dry conditions, strong and consistent braking over a wide range of speeds,Built For: AM/XC/DH/FR,Compatible with: Shimano M395, M415, M416, M445, M465, M475, M485, M486, M495,M501, M506, M515, M525, M575, T615; Quad Sting, Rapide, Nano; Tektro Auriga, Aquila, Dorado, Draco, Gemini, HDC; TRP Hylex, HYDR, Spyre; Giant MPH; RST D-Power,4 pairs of pads.
Nukeproof Mega Alloy MTB Lower Swing Link Kit This Mega Alloy Lower Swing Link Kit is for use with the 2021-2022 Mega Alloy Frame and 2021-2022 Megawatt. This kit includes enough parts for both the Drive and Non-Drive sides. Features: 2x N6E-SWS - Seat Stay Clevis Washer 2x R28 - Seat Stay Clevis Lock Ring 2x N6E-SLB - Seat Stay Clevis Bolt Part Number: NP21MGLSLKT Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.