Mavic Allroad Pro Disc Centre-Lock Front WheelWhether you're taking the long road home or spending the weekend exploring countryside backroads, this gravel bike front wheel is kitted out with a maxtal aluminium rim construction for maximum strength and durability on your adventures. Mavic has also put this version through its SUP welding technology process, which creates a stronger and smoother joint. After bending, the rim joint is arc welded and the welded seam is then milled for a smooth finish. As a result, it eliminates shuddering when braking and offers a superior wheel balance thanks to its extremely strong rim joint.Gravel Bike Front Wheel with Tubeless Ready TechnologyDeveloped for the rigours of gravel adventure riding, this front wheel features tubeless-ready technology. This allows you to enjoy tubeless advantages such as the ability to run lower tyre pressures for increased traction and stability on rough roads, lower rolling resistance and fewer chances of flats or punctures. Another highlight is its straight pull, flat Zicral spokes, which are lighter for easier climbing and stiffer for better energy transmission. Mavic has also equipped this model with adjustable sealed cartridge bearings (QRM+) for high durability and efficiency thanks to low play and tight tolerances.Centre-Lock Disc Brake CompatibilityThanks to this front wheel's Centre-Lock disc brake compatibility, you'll benefit from powerful and consistent braking performance. Classed as ASTM Category 2, it's perfect for road and gravel riding with jumps less than 15cm. This makes the Mavic Allroad Pro Disc Centre-Lock Front Wheel a great choice of upgrade for conquering every adventure.Features: Rim Material: Maxtal Aluminium with SUP welding technology Use: Gravel Axle Size: 12x100mm Internal Rim Width: 22mm Rim Height: 21mm ETRTO: 622x22TSS Rim Profile: Clincher Drilling: Fore Tubeless Ready: Yes Joint: SUP Tyre Compatibility: UST Tubeless and tubetype clincher Recommended Tyre Sizes: 28 to 62 mm (1.1" to 2.5") Valve Hole Diameter: 6.5mm Spoke Material: Zicral Spoke Shape: Straight-pull, flat Spoke Count: 20 Spoke Lacing: 2 cross Nipples: Fore integrated Aluminium Axle Material: Aluminium Brake Compatibility: Centre-Lock disc brake Bearings: Adjustable sealed cartridge bearings (QRM+) Max Rider Weight: For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg, bike included ASTM Category 2: Road and off-road with jumps less than 15cm Single or Pair: Single front wheel Weight Reduction: ISM 4DManufacturer's Part Numbers: LF7321100 Black 700cBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The no-questions-asked replacement wheel set, simple and reliable, Available in 26, 27.5, 29Wheel-system approachAll components engineered together 21mm wide rim good in all conditions Straight pull spokesProven mechanismsSleeved rim: light and strong FTS-X freehub Compatibiity: 9/15 Front, 9x135 RearRimsJoint: sleevedDrilling: traditionalValve hole diameter: 8,5 mm with pop off reducerTyre: tubetypeInternal width: 21 mmETRTO size 29": 622x21CSpokesMaterial: steelShape: straight pull, roundNipples: steel, ABSCount: 24 front and rearLacing: front and rear crossed 2HubsFront and rear bodies: aluminumAxle material: front aluminum, rear steelSealed cartridge bearingsFreewheel: FTS-X steelVersionsColor: Black onlyDisc standard : 6 Bolts onlyCompatibilityFreewheel: Shimano/SramFront axle: convertible from 15mm thru axle to Quick Release with optional adaptorsDelivered withRear QR adaptors (Supplied with purchase of rear wheel or pair)Rim tapeUser guideRim profileCrossride 16Intended useASTM CATEGORY 3 : offroad with jumps less than 61cmFor a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedRecommended tyre sizes: 35 mm to 69 mm (1.4" to 2.7")FiltersCategory : Traildiameter: 29"front axle: 15x100front axle: 9x100 (quick release)rear axle: 10x135 (quick release)rim width (internal): 21mmtubeless: noEfficiency & rigidityFTS-XQRMOur Crossride FTS-X uses a proven Mavic construction. And for 2016 it gets a completely new, sleeved rim that's wider and lighter for better comfort and control, to go with a proven FTS-X rear hub. The result is one of the best-value wheelsets on the market. Tested as a system Spokes are round, with 24 at the front and rear to offer stiffness and reliability. And like all Mavic wheels, they are straight pulled to be a true wheel system, with all components developed and tested together to ensure performance and reliability. Compatible and practical On the practical side, the front hub is compatible with 9mm and 15mm axles (adapters and QR delivered) and the rear hub can only fit a 9x135mm (QR) frame. Crossride FTS-X is available in 26", 27.5" and 29" without tires. However, our Crossride Quest 2.25 tire is available in all three diameters.Weight Front 29" 940Weight Pair 29" 2075Weight Rear 29" 1135
Mavic Women's Ksyrium Elite II Road Shoes With a women's specific fit and a versatility that will suit virtually every rider out there, the Ksyrium Elite II provides comfort that will last throughout your ride as well as a stiffness that delivers incredible power transfer. It's easy to see why this is Mavic's most popular road shoe.The Energy Carbon Comp outsole is constructed of a lightweight composite glass fibre and Nylon insert with carbon, for increased stiffness. The sole is only 6mm thick and with the low stack height of 7.5mm, your foot will be closer to the pedal for improved power transfer. With 5mm front/rear adjustment, you can customise the fit of your cleats.Designed with comfort in mind, an Ergo Fit 3D Ortholite dual density insole provides excellent support and stability for the heel and arch. The Endofit tongue is an internal sleeve that's designed to hug the foot for maximum comfort. Finally, an Ergo Ratchet closure system allows precise adjustment, for a customised fit.Features:Mavic's most popular road shoe in a women's specific fit Stiff, comfortable and versatileEnergy Carbon Comp sole provides stiffness for optimal power transferErgo Fit 3D Ortholite dual density insole provides excellent support and stabilityErgo Ratchet closure allows precision adjustment for a customised fitWeight: 500g (pair, size 5.5)Buy Mavic Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mavic EX 1028 Mountain Bike RimSpecifically designed for the unique demands of downhill (DH) and enduro riding, this trail-ready rim features a tough maxtal aluminium construction that uses its triangular rim shape to absorb heavy impacts, so you can hammer through rough terrain with confidence. Developed, tested and proven to meet the standards of downhill racers and enduro riders, its wider 28mm internal rim width ensures that you'll benefit from its increased grip and excellent stability. From hard-hammering rocks to hard landings and big compressions, this premium gravity-oriented rim is engineered to deliver a strong and reliable roll, while the use of Mavic key technologies makes it efficient and comfortable to ride.Features: Material: S6000 Maxtal AluminiumUse: Downhill, Enduro, MTB and All MountainETRTO: 27.5": 584 x 28TC; 29": 622 x 28TCType: ClincherInternal Rim Width: 28mmSpoke Hole Count: 32 holeSpoke Bed Diameter (ERD): 27.5": 559mm; 29": 597mmDrilling: TraditionalTubeless Tape Width: 32mm (not supplied with the rim)Recommended Rim Tape: Mavic UST rim tape (not supplied with the rim)Recommended Nipple Length: 14mmSUP / WeldedManufacturer's Part Numbers: 27.5": LJ4380100; 29": LJ4370100Single or Pair: SingleWeight: 27.5": 580g; 29": 620gTechnologies: Maxtal: Light and strong. Exclusive to Mavic, this specific aluminium alloy offers a higher strength to weight ratio than conventional 6106 alloy.SUP (Soudé Usiné Process): Stronger and smoother joint. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mavic Ksyrium Elite II SPD-SL Road ShoesIt's easy to see why the Ksyrium Elite is Mavic's most popular road shoe. With a versatility that will suit virtually every rider out there, the Ksyrium Elite II provides comfort that will last throughout your ride as well as a stiffness that delivers incredible power transfer. The Energy Carbon Comp outsole is constructed of a lightweight composite glass fibre and Nylon insert with carbon, for increased stiffness. The sole is only 6mm thick and with the low stack height of 7.5mm, your foot will be closer to the pedal for improved power transfer. With 5mm front/rear adjustment, you can customise the fit of your cleats.Designed with comfort in mind, an Ergo Fit 3D Ortholite dual density insole provides excellent support and stability for the heel and arch. The Endofit tongue is an internal sleeve that's designed to hug the foot for maximum comfort. Finally, an Ergo Ratchet closure system allows precise adjustment, for a customised fit.Features: Stiff, comfortable and versatile Energy Carbon Comp sole provides stiffness for optimal power transfer Ergo Fit 3D Ortholite dual density insole provides excellent support and stability Ergo Ratchet closure allows precision adjustment for a customised fit Weight: 560g (pair, size 8.5)Buy Mavic Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed with features and technologies that are typically reserved for premium race wheels, Aksium delivers quality performance for everyday road riding.Features include straight-pull spokes for added strength and stiffness, and lightweight rims for a lively ride quality. The rims are now wider, which allows for increased air volume and a better fit for larger diameter tires (up to 32mm).The hubs are incredibly tough, delivering high mileage and long-lasting dependability. And the QRM bearings are the smoothest in the category. It all adds up to a wheelset that delivers the high-quality ride that Mavic is known for.Key Features:Smooth, efficient ride quality for everyday road riding.,17mm rim accommodates larger tire section for improved comfort.,Straight-pull spokes are stronger than J-bend options.,Engineered durability so you can ride more miles without service.,High quality cartridge bearings.,Pinned joint and reinforced drilling rim design.,Consistent and stable spoke lacing..CompatibilityRear axle: Quick Release onlyFront axle: Quick Release onlyFreewheel: Shimano/Sram, convertible to Campagnolo with optional driver bodyHubsFront and rear bodies: aluminumAxle material: steelSealed cartridge bearings (QRM)Freewheel: FTS-L steelCompatible Adapters and freewheel bodiesFTS-L Campagnolo freewheel body (L30871200)FTS-L Shimano / Sram freewheel body (L30871100 - Delivered on the wheel) Intended UseMax. Pressure: see indication on wheel and tyre. If they differ, use the lowest of the 2For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 1 : road onlyRecommended tyre sizes: 25 to 32 mm
Modern off-road wheel performance meets classic rim-brake simplicity.For those who still prefer the lightweight simplicity of rim brakes, the Crossride UB is a smart choice for off-road versatility. The rim is built specifically for rim brakes and features our H2 reinforcement at the spoke holes for added strength and durability.And at just 1700g for the wheelset, it’s a lightweight option for better handling and easier climbing. The Crossride UB is only available for rim brakes and is compatible with frames and forks using standard quick releases.Key benefitsLightweight wheel system for climbing efficiency.,Wheelset weighs only 1700g. System engineered for overall performance. Hub quality with FTS-X freehub and QRM bearings.,Strong and durable for long-lasting performance.,Reinforced rims feature H2 compression. Proven reliability of FTS-X freehub and QRM bearings.,Give your bike the Mavic look and feel.,Large and visible Mavic graphics. Straight pull bladed spokes..
This dependable UST road wheel gives you the confidence you need to tackle rugged adventurous roads with smooth control. With a 25mm wide rim profile in a 650B diameter this UST Road Tubeless wheel system is built for adventure on the roughest terrain.Perfect for riding on rough roads gravel or dirt it gives you the smooth-riding performance of tubeless tires and makes it easy to set them up without any hassles. Low rolling resistance and a reduced risk of punctures add up to a better overall riding experience especially on rugged terrain.The wheels are engineered for the unique demands of disc brakes built up with 24 straight-pull spokes which are stronger than J-bend spokes. So wherever the road goes and however rough it gets you're ready to keep things rolling. Key benefits Purpose-built for riding rough roads gravel or dirt 25mm wide rim takes tire up to 64mm UST Road Tubeless technology improves comfort and rolling resistance and reduces the risk of punctures 650B diameter keeps the wheel agile Proven performance and reliability at an attainable cost Infinity hub platform optimizes spoke tension and wheel stability Instant Drive 360 freewheel engages quickly and automatic bearing preload keeps free spinning through time and abuse Straight-pull round spokes which are stronger than J-bend spokes Rolling efficiency and nimble ride quality Sleeved rim minimizes weight Consistent and stable spoke lacing Low-friction hub internals Specifications DELIVERED WITH User guide UST valve and accessories Pre-installed tubeless rim tape Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 6.5 mm Disc brake specific profile Joint: sleeved ETRTO size 27.5': 584x25TSS Internal width: 25 mm Spokes Shape: straight pull round Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Nipples: steel ABS Intended use Recommended tyre sizes: 28 to 64 mm (1.1' to 2.5') ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesnn't exceed 120kg bike included Max. Pressure: see indication on wheel and tyre. If they differ use the lowest of the 2 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto Infinity Hub Compatibility Freewheel: Shimano/Sram convertible to Campagnolo and XD-R with optional driver bodies Front axle: 12mm thru axle easily convertible to quick release with included adapters. Convertible to 15mm with complete axle replacement Versions Color: Black only Disc standard: Center Lock (R) only Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release ([LV2680300]) 15mm axle ([LV2373500]) 12x142 rear axle adapters ([LV2510700] - Delivered with the wheel) 12x135 rear axle adapters ([LV2510900]) ID360 Shimano / Sram Light freewheel body ([LV3850100]) ID360 Campagnolo freewheel body ([LV3440100]) ID360 XD-R freewheel body ([LV2580100]) ID360 Shimano / Sram freewheel body ([LV3430100] - Delivered on the wheel) 12 to 9mm rear adapter for quick release ([LV2510800] ID360 N3W freewheel body ([V4270101])
Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction it offers aspiring road riders the clear performance benefits of a high-quality wheelset.This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight-pull spokes for added stiffness and strength and we also increased the spoke count to 24 on both front and rear wheels.With a 17mm internal width these rims are compatible with tires up to 32mm making them versatile comfortable and ideal for challenging road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability.The Aksium Disc is made for standard quick release and is compatible Center Lock brake rotors. Key benefits Powerful reliable disc brakes for added confidence and control. 24 spokes front and rear for optimized brake torque distribution. Disc-brake optimized rim profile. Disc-friendly spoke geometry and lacing pattern. Smooth efficient ride quality. Wider 17mm (inner width) rims allow tires up to 32mm. High quality QRM cartridge bearings. Straight pull round spokes are stronger than J-bend options. Spokes Shape: straight pull round Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Nipples: steel ABS Rims Tire: clincher Material: S6000 Aluminum Joint: pinned Valve hole diameter: 65 mm Disc brake specific profile Internal width: 17 mm Height: 21 mm Drilling: traditional ETRTO size: 622x17C Delivered with User guide Rim tape Front QR adapters Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 75bar/108PSI with a 23mm tyre - 46bar/67PSI with a 52mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Color: Black only Disc standard : 6 Bolts or Center Lock® Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) 12x135 rear axle adapters (V2510901) with axle V2373401 ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The new Mavic E-Speedcity celebrates Mavic's comeback into the world of commuter bikes after designing fenders in the early days of the company.We've put 130 years of experience at the highest level of cycling to design the right wheel for your daily commutes.The wheels are built strong and durable.The 32 solid j-bent spokes coupled with high flange hubs enable a maximum load capacity of 180kg (25% higher than the usual Mavic road wheels) to takeinto consideration the extra weight and loads involved by daily commutes.Our e-mtb proven freewheel mecanism with automatic bearing preload perfectly handles the most powerfull ebike motors (up to 120Nm motor torque). Their smoothness saves effort from both the motor and the rider.Our years of experience in wheelbuilding are a guarantee for a stable built over long mileage so you don't lose any time in the workshop.Because we all care about our environment and aim at reducing our carbon footprint the aluminum alloy used to produce those rims is made of 90% of recycled aluminum. Also those wheels are handbuilt in Europe with components 100% sourced from Europe.This 700 version is 25mm wide and can be used with tyres up to 64mm.Last but not least we care about your safety and that of your bikes. Those wheels are discreet so as to not arouse covetousness but their black reflective stickers glow at night to keep you visible in the traffic.They are eligible to our Mavic Care program which includes a free 3rd year of warranty a crash replacement policy and the availability of spare parts for over 5 years. Key benefits Sturdy and durable 32 solid j-bent spokes handbuilt in Mavic's factory in Europe Strong freewheel mecanisme handles motor torque up to 120Nm Smooth durable bearings saves muscular and electric power Keeping you and your bike safe and sound 700 diameter is compatible with wide comfy tyres (up to 64mm) Black reflective stickers are discreet but glow at night Maximum load weight: 180kg Environment friendly Rims made of 90% of recycled aluminum Manufactured in Europe with components 100% made in Europe Specifications DELIVERED WITH User guide Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 65 mm Disc brake specific profile Height: 21 mm Drilling: traditional Joint: sleeved UST Tubeless Ready ETRTO size 29: 622x25TSS Internal width: 25 mm Hookless profile E-Bike specific rim profile Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 32 front and rear Shape: j-bent round 20 straight gauge Delivered with User guide Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Hub available for Center Lock brake rotors only Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101 - Delivered on the wheel) Non-Boost : 12x135 rear axle adapters (V2510901) ID360 Shimano Micro Spline alloy freewheel body (V3990101) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401)
The new Mavic E-Speedcity celebrates Mavic's comeback into the world of commuter bikes after designing fenders in the early days of the company.We've put 130 years of experience at the highest level of cycling to design the right wheel for your daily commutes.The wheels are built strong and durable.The 32 solid j-bent spokes coupled with high flange hubs enable a maximum load capacity of 180kg (25% higher than the usual Mavic road wheels) to takeinto consideration the extra weight and loads involved by daily commutes.Our e-mtb proven freewheel mecanism with automatic bearing preload perfectly handles the most powerfull ebike motors (up to 120Nm motor torque). Their smoothness saves effort from both the motor and the rider.Our years of experience in wheelbuilding are a guarantee for a stable built over long mileage so you don't lose any time in the workshop.Because we all care about our environment and aim at reducing our carbon footprint the aluminum alloy used to produce those rims is made of 90% of recycled aluminum. Also those wheels are handbuilt in Europe with components 100% sourced from Europe.This 650B version will be perfect for the newest SUV type of bicycle : the 30mm internal rim width fits tyres up to 76mm/3.0'' and integrates our unique Pinch Flat Protection upper rim wall shape to reduce risks of flats by 20% when rolling over obstacles curbs potholes and eveyrthing the city will throw at you.Last but not least we care about your safety and that of your bikes. Those wheels are discreet so as to not arouse covetousness but their black reflective stickers glow at night to keep you visible in the traffic.They are eligible to our Mavic Care program which includes a free 3rd year of warranty a crash replacement policy and the availability of spare parts for over 5 years. Key benefits Sturdy and durable 32 solid j-bent spokes handbuilt in Mavic's factory in Europe Strong freewheel mecanisme handles motor torque up to 120Nm Smooth durable bearings saves muscular and electric power Keeping you and your bike safe and sound 650B diameter is compatible with wide comfy tyres (up to 76mm) and integrates the PFP flat reduction system Black reflective stickers are discreet but glow at night Maximum load weight: 180kg Environment friendly Rims made of 90% of recycled aluminum Manufactured in Europe with components 100% made in Europe Specifications DELIVERED WITH User guide Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 65 mm Disc brake specific profile Height: 21 mm Drilling: traditional Joint: sleeved UST Tubeless Ready Hookless profile Internal width: 30 mm E-Bike specific rim profile Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) ETRTO size 275: 584x30TC Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 32 front and rear Shape: j-bent round 20 straight gauge Delivered with User guide Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Hub available for Center Lock brake rotors only Intended use Recommended tire sizes: 50mm to 76mm (20 to 30) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101 - Delivered on the wheel) Non-Boost : 12x135 rear axle adapters (V2510901) ID360 Shimano Micro Spline alloy freewheel body (V3990101) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401)
With a wide 22mm rim profile that's optimized for high-volume tires, this UST Road Tubeless wheel system is built for adventure.Perfect for riding on rough roads, gravel or dirt, it gives you the smooth-riding performance of tubeless tires and makes it easy to set them up without any hassles. Low rolling resistance and a reduced risk of punctures add up to a better overall riding experience, especially on rugged terrain.The wheels are engineered for the unique demands of disc brakes, built up with 24 straight-pull spokes, which are stronger than J-bend spokes. So wherever the road goes, and however rough it gets, you're ready to keep things rolling.Key Features:Purpose-built for riding rough roads, gravel or dirt.,22mm wide rim takes tire up to 62mm.,UST Road Tubeless technology improves comfort and rolling resistance, and reduces the risk of punctures.,Compatible with all standard retention systems.,Proven performance and reliability at an attainable cost.,High-quality QRM cartridge bearings.,Disc-brake-specific, sleeved-style rim technology.,Straight-pull round spokes, which are stronger than J-bend spokes.,Rolling efficiency and a nimble ride quality.,Sleeve joint rim minimizes weight.,Consistent and stable spoke lacing.,Low-friction hubs..CompatibilityFront axle: 12mm thru axle, easily convertible to quick release with included adapters. Convertible to 15mm with complete axle replacementRear axle: 12mm thru axle, convertible to Quick Release with included adaptersFreewheel: Shimano/Sram, convertible to Campagnolo and XD-R with optional driver bodiesHubsAuto adjust sealed cartridge bearings (QRM Auto), front and rearFreewheel: Instant Drive 360 steelFront: Quick release, 12x100 and 15x100 through axle compatibleRear: Quick Release, 12x142 and 12x135 compatibleFront and rear bodies: aluminumAxle material: aluminumCompatible Adapters and freewheel bodiesID360 Shimano / Sram freewheel body (LV3430100 - Delivered on the wheel)ID360 XD-R freewheel body (LV2580100)ID360 Campagnolo freewheel body (LV3440100)ID360 Shimano / Sram Light freewheel body (LV3850100)12x135 rear axle adapters (LV2510900)12 to 9mm rear adapter for quick release (LV2510800 - Delivered with the wheel)12x142 rear axle adapters (LV2510700 - Delivered with the wheel)15mm axle (LV2373500)12 to 9mm front adapter for quick release (LV2680300 - Delivered with the wheel)Intended UseMax. Pressure: see indication on wheel and tyre. If they differ, use the lowest of the 2For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 2 : road and offroad with jumps less than 15cmRecommended tyre sizes: 28 to 64 mm (1.1" to 2.5") VersionsDisc standard : 6 Bolts or Center Lock(R)Color: Black only
Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction, it offers aspiring road riders the clear performance benefits of a high-quality wheelset.This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight-pull spokes for added stiffness and strength, and we also increased the spoke count to 24 on both front and rear wheels.With a 17mm internal width, these rims are compatible with tires up to 32mm, making them versatile, comfortable and ideal for challenging road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability.The Aksium Disc is made for standard quick release and is compatible Center Lock brake rotors.Key Features:,Powerful, reliable disc brakes for added confidence and control.,24 spokes front and rear for optimized brake torque distribution.,Disc-brake optimized rim profile.,Disc-friendly spoke geometry and lacing pattern.,Smooth, efficient ride quality.,Wider 17mm (inner width) rims allow tires up to 32mm.,High quality QRM cartridge bearings.,Straight pull round spokes are stronger than J-bend options..CompatibilityFront axle: 12x100 thru axle, easily convertible to quick release with included adapters. Not compatible with 15mm through axles.Rear axle: 12mm thru axle, convertible to Quick Release with included adaptersFreewheel: Shimano/Sram, convertible to Campagnolo and XD-R with optional driver bodiesHubsFront: Quick release and 12x100 through axle compatibleAuto adjust sealed cartridge bearings (QRM Auto), front and rearRear: Quick Release, 12x142 and 12x135 compatibleFreewheel: Instant Drive 360Front and rear bodies: aluminumAxle material: aluminumCompatible Adapters and freewheel bodiesID360 Shimano / Sram freewheel body (LV3430100 - Delivered on the wheel)ID360 XD-R freewheel body (LV2580100)ID360 Campagnolo freewheel body (LV3440100)ID360 Shimano / Sram Light freewheel body (LV3850100)12x135 rear axle adapters (LV2510900)12 to 9mm rear adapter for quick release (LV2510800 - Delivered with the wheel)12x142 rear axle adapters (LV2510700 - Delivered with the wheel)12mm front hub cap (LV2680500 - Delivered with the wheel)12 to 9mm front adapter for quick release (LV2680300 - Delivered with the wheel)Intended UseMax. Pressure: see indication on wheel and tyre. If they differ, use the lowest of the 2For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 2 : road and offroad with jumps less than 15cmRecommended tyre sizes: 25 to 32 mmVersionsDisc standard : 6 Bolts or Center Lock(R)Color: Black only
Mavic XA Elite MTB Front WheelThis MTB front wheel is equipped with a maxtal aluminium rim, which offers a higher strength to weight ratio than conventional 6106 alloy. With 30% more resistance, its light and strong rim construction make it perfect for XC racing and trail riding disciplines. Mavic has also put this model through its SUP welding technology process for a stronger and smoother rim joint. After bending, the rim joint is arc welded and the welded seam is then milled for a smooth finish. This makes it extremely strong and eliminates shuddering when braking as well as providing superior wheel balance.MTB Front Wheel with ISM 4D TechnologyWell-equipped for wherever your next mountain bike ride takes you, this front wheel benefits from an exclusive Mavic patented concept called Inter Spoke Milling 4 Dimensions (ISM 4D). ISM 4D significantly reduces weight and inertia without compromising durability. Its 15% lighter rim delivers the lowest inertia for instant acceleration, better handling and faster climbing, while its variable rim thickness optimises constraints management for more reliability. Its smooth profile also helps to reduce aerodynamic drag and as a result, it offers better airflow for higher speed.UST Tubeless Ready and 6-Bolt Disc Brake CompatibleThanks to this MTB front wheel's UST tubeless ready technology, it improves traction, control and comfort while reducing inertia and flats. Its tubeless ready construction also results in a lighter tyre for improved performance. Coming complete with 6-bolt disc brake compatibility, the Mavic XA Elite MTB Front Wheel ensures powerful and responsive braking performance on the most demanding of course and terrain conditions.Features: Rim Material: Maxtal Aluminium with hookless profile Use: Cross Country (XC), Mountain Bike (MTB) Axle Size: 12x100mm Internal Rim Width: 25mm ETRTO: 584x25TSS Rim Profile: Hookless profile Drilling: Traditional Tubeless Ready: Yes Joint: SUP Tyre Compatibility: Hookless compatible UST Tubeless and tubetype Recommended Tyre Sizes: 46mm to 64mm (1.8" to 2.5") Valve Hole Diameter: 6.5mm Spoke Material: Steel Spoke Shape: Straight pull, flat, double butted Spoke Count: 24 Spoke Lacing: 2 cross Axle Material: Aluminium Wheel Hub Body Material: Aluminium Brake Compatibility: 6-bolt disc brake Bearings: Auto adjust sealed cartridge bearings (QRM Auto) Max Rider Weight: For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg, bike included ASTM Category 3: Cross country and trail riding Single or Pair: Single front wheel Weight Reduction: ISM 4D Weight: 780gManufacturer's Part Numbers: LF8349100 Black 27.5"Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a wide 22mm rim profile that's optimized for high-volume tires this UST Road Tubeless wheel system is built for adventure.Perfect for riding on rough roads gravel or dirt it gives you the smooth-riding performance of tubeless tires and makes it easy to set them up without any hassles. Low rolling resistance and a reduced risk of punctures add up to a better overall riding experience especially on rugged terrain.The wheels are engineered for the unique demands of disc brakes built up with 24 straight-pull spokes which are stronger than J-bend spokes. So wherever the road goes and however rough it gets you're ready to keep things rolling. Key benefits Purpose-built for riding rough roads gravel or dirt. 22mm wide rim takes tire up to 62mm. UST Road Tubeless technology improves comfort and rolling resistance and reduces the risk of punctures. Compatible with all standard retention systems. Proven performance and reliability at an attainable cost. High-quality QRM cartridge bearings. Disc-brake-specific sleeved-style rim technology. Straight-pull round spokes which are stronger than J-bend spokes. Rolling efficiency and a nimble ride quality. Sleeve joint rim minimizes weight. Consistent and stable spoke lacing. Low-friction hubs. Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 65 mm Disc brake specific profile Joint: sleeved Internal width: 23 mm Height: 22 mm ETRTO size: 622x23TC Spokes Shape: straight pull round Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Nipples: steel ABS Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 55bar/80PSI with a 28mm tyre - 325bar/47PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Color: Black only Disc standard : 6 Bolts or Center Lock® Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 12x135 rear axle adapters (V2510901) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Mavic quality at an accessible price. Wider rims and durable hubs make Aksium a great choice for everyday road riding. Key benefits Smooth efficient ride quality for everyday road riding. 17mm rim accommodates larger tire section for improved comfort. Straight-pull spokes are stronger than J-bend options. Engineered durability so you can ride more miles without service. High quality cartridge bearings.Pinned joint and reinforced drilling rim design.Consistent and stable spoke lacing. Designed with features and technologies that are typically reserved for premium race wheels Aksium delivers quality performance for everyday road riding. Features include straight-pull spokes for added strength and stiffness and lightweight rims for a lively ride quality. The rims are now wider which allows for increased air volume and a better fit for larger diameter tires (up to 32mm). The hubs are incredibly tough delivering high mileage and long-lasting dependability. And the QRM bearings are the smoothest in the category. It all adds up to a wheelset that delivers the high-quality ride that Mavic is known for. Specifications Compatibility Rear axle: Quick Release only Front axle: Quick Release only Freewheel: Shimano/Sram convertible to Campagnolo with optional driver body Compatible Adapters and freewheel bodies FTS-L Campagnolo freewheel body (30871201) FTS-L Shimano / Sram freewheel body (30871101 - Delivered on the wheel) Weight Pair without tyre: 1840 grams Front without tyre: 845 grams Rear without tyre: 995 grams Hubs Front and rear bodies: aluminum Axle material: steel Sealed cartridge bearings (QRM) Freewheel: FTS-L steel Intended Use Max. Pressure: 23mm 8.7 bars - 125 psi 25/28mm 7.7 bars - 110 psi For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels don't exceed 120kg bike included ASTM CATEGORY 1 : road only Recommended tyre sizes: 25 to 32 mm Rims ETRTO size: 622x17C Drilling: traditional Internal width: 17 mm Height: 21 mm Valve hole diameter: 6.5 mm Joint: pinned Material: S6000 Aluminum Tyre: clincher Brake track: UB Control Spokes Shape: straght pull round (front and rear non drive side) and straight pull flat (rear drive side) Nipples: steel ABS Shape: straight pull round Material: steel Lacing: radial front and rear non-drive side crossed 2 rear drive side Count: 20 front and rear Versions Color: Black only Delivered with Rim tape User guide BR101 quick releases
Mavic Crossmax MTB WheelsetFeaturing a welded rim construction, this cross country (XC) wheelset offers a light and strong profile that's perfectly sealed. This makes it highly durable when battling across rough and challenging mixed terrain conditions at speed, while its 24 double-butted spokes allow for dynamic and agile performance. Another highlight is its tubeless ready technology, which makes it easy to ride tubeless for more comfort and control.Tubeless Ready XC Wheelset with Hookless ProfileThe name Crossmax has a long history in the world of XC riding and racing and this updated wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless-ready tyres and gives you all the associated benefits including better traction and control, a smoother ride quality, and a reduced risk of punctures. The rim is welded for added reliability and features a 25mm internal width with a hookless profile.Infinity Hub and Centrelock Disc Brake CompatibilityThe Infinity lighter hub design optimises lateral stiffness and spokes tension. Mavic's Instant Drive 360 freewheel with a double ratchet system provides fast engagement and top-level reliability. The Crossmax also comes kitted out with Centrelock disc brake compatibility, so you can enjoy powerful and consistent braking performance when charging across the XC course.This wheelset is available in either standard or Boost axle spacing. Please choose the option from the menu to match your setup. The wheelset is delivered with valves, replacement spokes and accessories.Features: Rim Material: Maxtal Aluminium Use: Cross Country (XC) Internal Rim Width: 25mm Tyre Compatibility: Clincher ETRTO: 27.5" Option: 584x25TSS; 29" Option: 622x25TSS Spokes Material: Steel Spokes Shape: Straight pull, flat, double-butted Spoke Nipples: Steel, ABS Spoke Count: 24 front and rear Spoke Lacing: Front and rear crossed 2 Freehub: Multiple options available to select Infinity Hubs: Yes ATSM Category: 3: Cross Country Delivered With: UST valve and accessories, Pre-installed tubeless rim tape, 2 replacement spokes with each wheel Brake Type: Disc brake Disc Mount: Centrelock Single or Pair: Pair UST tubeless technology Instant Drive 360 freewheel technology QRM Auto bearing preload technology SUP Hookless profile Weight: 27.5" Option: Pair: 1680g; Front: 775g; Rear: 905g; 29" Option: Pair: 1770g; Front: 820g; Rear: 950gTechnologies: Instant Drive 360 Freewheel Technology: The Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile. UST Tubeless Technology: Traction and control Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats. SUP Welding Technology: Stronger and smoother joint Soudé Usiné Process. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish. QRM Auto Bearing Preload Technology: Qualité de Roulements Mavic Auto (QRM Auto). Mavic's latest innovation. Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Manufacturer's Part Numbers: P1667115 Black 27.5" Micro Spline P1572115 Black 29" Micro Spline P1668115 Black 29" ShimanoBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed with features and technologies that are typically reserved for premium race wheels Aksium delivers quality performance for everyday road riding.Features include straight-pull spokes for added strength and stiffness and lightweight rims for a lively ride quality. The rims are now wider which allows for increased air volume and a better fit for larger diameter tires (up to 32mm).The hubs are incredibly tough delivering high mileage and long-lasting dependability. And the QRM bearings are the smoothest in the category. It all adds up to a wheelset that delivers the high-quality ride that Mavic is known for. Key benefits Smooth efficient ride quality for everyday road riding. 17mm rim accommodates larger tire section for improved comfort. Straight-pull spokes are stronger than J-bend options. Engineered durability so you can ride more miles without service. High quality cartridge bearings. Pinned joint and reinforced drilling rim design. Consistent and stable spoke lacing. Rims Brake track: UB Control Tire: clincher Material: S6000 Aluminum Joint: pinned Valve hole diameter: 65 mm Internal width: 17 mm Height: 21 mm Drilling: traditional ETRTO size: 622x17C Hubs Freewheel: FTS-L steel Sealed cartridge bearings (QRM) Axle material: steel Front and rear bodies: aluminum QRM bearing preload technology FTS-L freewheel technology Spokes Shape: straight pull round Count: 20 front and rear Lacing: radial front and rear non-drive side crossed 2 rear drive side Material: steel Nipples: steel ABS Shape: straght pull round (front and rear non drive side) and straight pull flat (rear drive side) Delivered with BR101 quick releases User guide Rim tape Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 1 : road only For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 75bar/108PSI with a 23mm tyre - 46bar/67PSI with a 52mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo with optional driver body Front axle: Quick Release only Rear axle: Quick Release only Versions Color: Black only Compatible Adapters and freewheel bodies FTS-L Shimano / Sram freewheel body (30871101 - Delivered on the wheel) FTS-L Campagnolo freewheel body (30871201) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The new Ksyrium 30 Disc is a perfect entry point into high-level race performance. This all-new UST Road Tubeless system delivers a smoother ride and improved puncture resistance while retaining a lightweight feel for climbing and accelerating.By removing the tube we’ve also removed friction so there’s less rolling resistance which means it requires less energy to reach higher speeds.The 30mm deep rim optimizes aero performance and improves stability in crosswinds. The alloy rim benefits from our unrivaled experience creating light yet strong rim extrusions. We do this by carefully tuning the thickness of the rim wall to hit the sweet spot between stiffness strength and weight.The bladed straight pull spokes are laced to our high-end Infinity hub platforms : optimal spoke tension balance is a guarantee for perfect stiffness and great durability with only 1 spokes length for both wheels to worry about.The Instant Drive 360 ratchet freewheel system is quick to engage and offers low friction.This hub easily converts from Shimano/SRAM to Campagnolo or XD cassette and is compatible with Center Lock disc rotors. Key benefits Light and aero rim 30mm deep profile Optimized rim wall thickness Welded Dynamic and agile Double butted spokes Infinity hub design ID360 freewheel Refined tubeless technology helps you roll faster and smoother and is easy to set up and maintain Optimized UST rim bed shape Durable and perfectly airtight tape system Rims Material: Maxtal Tire: UST Tubeless and tubetype Height: 30 mm Disc brake specific profile Internal width: 19 mm SUP welding technology UST tubeless technology Drilling: traditional ETRTO size: 622x19TC Spokes Count: 24 front and rear Material: steel Shape: straight pull flat double butted Nipples: steel ABS Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Infinity hubs Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 675bar/97PSI with a 23mm tyre - 38bar/55PSI with a 62mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Mavic E-Xa30 Elite MTB Front Wheel (Boost)This E-MTB front wheel is equipped with a hard-wearing maxtal aluminium rim construction with SUP welding technology, which gives it fantastic toughness and durability as you weave your way from trail to trail. Its wide 30mm internal rim width and 28 straight pull, flat, double-butted steel spokes also ensure maximum stability and control, as you tackle everything that your favourite local trails have to offer. Mavic has also kitted out this model with auto adjust sealed cartridge bearings (QRM Auto) and an aluminium hub for smooth and reliable rolling performance on your E-bike.E-MTB Front Wheel with 6-Bolt Disc Brake CompatibilityEngineered for the demands of modern electric mountain bike riding, this front wheel features Boost axle spacing for stronger and stiffer rolling efficiency. Built to handle the increased pressure, speed and torque levels produced by E-MTB motor systems, this model is also equipped with 6-bolt disc brake compatibility for powerful and consistent braking operation. One final highlight is its tubeless-ready technology, which enables you to run lower tyre pressures for increased traction and comfort as well as fewer chances of flats or punctures.Features: Rim Material: Maxtal Aluminium with SUP welding technology Use: Electric Mountain Bike (E-MTB) Axle Size: 15x110mm, Boost Internal Rim Width: 30mm ETRTO: 584x30TSS Rim Profile: Clincher Drilling: Traditional Tubeless Ready: Yes Joint: SUP Tyre Compatibility: UST Tubeless and tubetype clincher Recommended Tyre Sizes: 60mm to 76mm (2.35" to 3.0") Valve Hole Diameter: 6.5mm Spoke Material: Steel Spoke Shape: Straight pull, flat, double-butted Spoke Count: 28 Spoke Lacing: 3 cross Axle Material: Aluminium Wheel Hub Body Material: Aluminium Brake Compatibility: 6-bolt disc brake Bearings: Auto adjust sealed cartridge bearings (QRM Auto) Max Rider Weight: For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg, bike included ASTM Category 4: Enduro and trail riding Single or Pair: Single front wheel Weight Reduction: ISM 4D Weight: 908gManufacturer's Part Numbers: LF8408100 Black 27.5"Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.