The no-questions-asked replacement wheel set, simple and reliable, Available in 26, 27.5, 29Wheel-system approachAll components engineered together 21mm wide rim good in all conditions Straight pull spokesProven mechanismsSleeved rim: light and strong FTS-X freehub Compatibiity: 9/15 Front, 9x135 RearRimsJoint: sleevedDrilling: traditionalValve hole diameter: 8,5 mm with pop off reducerTyre: tubetypeInternal width: 21 mmETRTO size 26": 559x21CSpokesMaterial: steelShape: straight pull, roundNipples: steel, ABSCount: 24 front and rearLacing: front and rear crossed 2HubsFront and rear bodies: aluminumAxle material: front aluminum, rear steelSealed cartridge bearingsFreewheel: FTS-X steelVersionsColor: Black onlyDisc standard : 6 Bolts onlyCompatibilityFreewheel: Shimano/SramFront axle: convertible from 15mm thru axle to Quick Release with included adaptersDelivered withRear QR adapters (Supplied with purchase of pair or rear wheel)Valve reducerRim tapeUser guideRim profileCrossride 16Intended useASTM CATEGORY 3 : offroad with jumps less than 61cmFor a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedRecommended tyre sizes: 35 mm to 69 mm (1.4" to 2.7")FiltersCategory : Traildiameter: 26"front axle: 15x100front axle: 9x100 (quick release)rear axle: 10x135 (quick release)rim width (internal): 21mmtubeless: noEfficiency & rigidityFTS-XQRMOur Crossride FTS-X uses a proven Mavic construction. And for 2016 it gets a completely new, sleeved rim that's wider and lighter for better comfort and control, to go with a proven FTS-X rear hub. The result is one of the best-value wheelsets on the market. Tested as a system Spokes are round, with 24 at the front and rear to offer stiffness and reliability. And like all Mavic wheels, they are straight pulled to be a true wheel system, with all components developed and tested together to ensure performance and reliability. Compatible and practical On the practical side, the front hub is compatible with 9mm and 15mm axles (adapters and QR delivered) and the rear hub can only fit a 9x135mm (QR) frame. Crossride FTS-X is available in 26", 27.5" and 29" without tires. However, our Crossride Quest 2.25 tire is available in all three diameters.Weight Front 26" 865Weight Pair 26" 1925Weight Rear 26" 1060
The no-questions-asked replacement wheel set, simple and reliable, Available in 26, 27.5, 29Wheel-system approachAll components engineered together 21mm wide rim good in all conditions Straight pull spokesProven mechanismsSleeved rim: light and strong FTS-X freehub Compatibiity: 9/15 Front, 9x135 RearRimsJoint: sleevedDrilling: traditionalValve hole diameter: 8,5 mm with pop off reducerTyre: tubetypeInternal width: 21 mmETRTO size 29": 622x21CSpokesMaterial: steelShape: straight pull, roundNipples: steel, ABSCount: 24 front and rearLacing: front and rear crossed 2HubsFront and rear bodies: aluminumAxle material: front aluminum, rear steelSealed cartridge bearingsFreewheel: FTS-X steelVersionsColor: Black onlyDisc standard : 6 Bolts onlyCompatibilityFreewheel: Shimano/SramFront axle: convertible from 15mm thru axle to Quick Release with optional adaptorsDelivered withRear QR adaptors (Supplied with purchase of rear wheel or pair)Rim tapeUser guideRim profileCrossride 16Intended useASTM CATEGORY 3 : offroad with jumps less than 61cmFor a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedRecommended tyre sizes: 35 mm to 69 mm (1.4" to 2.7")FiltersCategory : Traildiameter: 29"front axle: 15x100front axle: 9x100 (quick release)rear axle: 10x135 (quick release)rim width (internal): 21mmtubeless: noEfficiency & rigidityFTS-XQRMOur Crossride FTS-X uses a proven Mavic construction. And for 2016 it gets a completely new, sleeved rim that's wider and lighter for better comfort and control, to go with a proven FTS-X rear hub. The result is one of the best-value wheelsets on the market. Tested as a system Spokes are round, with 24 at the front and rear to offer stiffness and reliability. And like all Mavic wheels, they are straight pulled to be a true wheel system, with all components developed and tested together to ensure performance and reliability. Compatible and practical On the practical side, the front hub is compatible with 9mm and 15mm axles (adapters and QR delivered) and the rear hub can only fit a 9x135mm (QR) frame. Crossride FTS-X is available in 26", 27.5" and 29" without tires. However, our Crossride Quest 2.25 tire is available in all three diameters.Weight Front 29" 940Weight Pair 29" 2075Weight Rear 29" 1135
Gravity and trail shredders ask a lot from their wheels. For those who like to mix it up on rough, technical terrain, here is the perfect new wheel choice.The Deemax Elite features cutting-edge design to help you push new limits and get the most out of your bike. The 30mm wide rims are built specifically for large tires, 2.25" up to 3.0". The rims are engineered with just enough vertical compliance to absorb some of the impacts that could damage a tire.Our innovative ISM 4D rim technology remove excess material, which makes the rims as light as possible without sacrificing strength. They are built up with 28 steel, double-butted spokes front and rear, and come with tubeless tape that makes it easy to experience all the benefits of UST tubeless: better traction, a smoother ride quality, and a reduced risk of flats.From aggressive trail riding days to enduro races and laps in the bike park, experience a wheel that's made for the way you ride.Key Features:Improved tire performance.,30mm wide rims to support the large tires, from 2.25 up to 3.0.,UST for optimal tubeless function.,Vertically compliant to absorb some of the impacts that could damage a tire.,Have better control on technical trails.,ISM 4D rim for the perfect balance of stiffness and compliance, weight and strength.,ID 360 ratchet gives a snappy response.,Optimized spoke material and lacing provide a supple yet responsive and predictable ride.,Feel secure on challenging trails and terrain.,Confidence inspired by Mavic's quality control and innovative design..CompatibilityFreewheel: Shimano Micro SplineFront axle: 15mm, convertible to 20mm thru axle with included adaptersRear axle: 12mm thru axle, convertible to Quick Release with optional adaptersFreewheel: Shimano/Sram or XDHubsAuto adjust sealed cartridge bearings (QRM Auto), front and rearFreewheel: Instant Drive 360Front and rear bodies: aluminumAxle material: aluminumCompatible Adapters and freewheel bodiesID360 Shimano Micro Spline alloy freewheel body (LV3990100)Non-Boost : 12x142 rear axle adapters (LV2510700 - Delivered with the wheel)Non-Boost : 12x135 rear axle adapters (LV2510900)Non-Boost : 20 to 9mm front adapter for quick release (L12982700)Non-Boost : 20mm front hub cap (L12982900 - Delivered with the wheel)Boost : 12x148 rear axle adapters (LV2510700 - Delivered with the wheel)Boost & Non-Boost : 20 to 15mm front adapter (L12982800 - Delivered with the wheel)Boost : 20x110 boost front hub cap (LV2680400 - Delivered with the wheel)ID360 XD freewheel body (LV3740100)ID360 Shimano alloy freewheel body (LV3780100)ID360 Shimano steel freewheel body (LV3790100)Intended UseRecommended tyre sizes: 60mm to 76mm (2.35" to 3.0")For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 4 : ENDURO AND TRAIL RIDING VersionsFreewheel; SRAM XD, Shimano HG, Shimano Micro-SplineHub width : Boost (front 110, rear 148) or Non-Boost (front 100, rear 135/142)Disc standard : 6 Bolts onlyColor: Black only
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall, which significantly reduces the risk of tire cuts and punctures. The wider 35mm rims allow you to run lower tire pressure for better traction, and the rims pair perfectly with trail tires ranging from 2.6 to 3.2-inch. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tires.ISM machining removes material from the rims in strategic areas to minimize weight without compromising strength, and our new Black Shield finish protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts, these 29” wheels are available for Shimano HG9, XD and Micro Spline freewheel bodies and come with UST tubeless valves, spare spokes and accessories.KEY BENEFITSReduced risk of flats on rugged trailsPFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall, which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain.Purpose-built for off-road E-bikesWider 30mm (internal) rim adds stiffness and cornering precision. Engineered for the added torque of E-bike motors with 28 threaded three-cross spokes that further boost lateral stiffness.Most user-friendly tubeless systemFully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim.
Trail riding is all about adventures, thrills and fun. Exploring wild places and flowy trails. To get the most out of your ride, you need to have confidence in your gear. This is especially true with your wheels, which play a critical role in the overall ride experience. That’s where the new Crossmax XL comes in. It represents the highest quality aluminum trail wheel we’ve ever built.The rims are made with our patented Fore technology, which features a fully sealed upper bridge that eliminates the need for rim tape. That saves 30 grams per wheel and does away with the hassle of using tape to set up tubeless tires. The rim has a 30mm internal width, perfect for optimizing the performance of any modern trail tire. It’s engineered with a super strong triangular shape, designed specifically to absorb impacts from the trail. Our Black Shield technology gives them a distinctive finish that protects against scratches and abrasions.We use 24 straight-pull spokes to further dial in the sweet spot between lateral stiffness and vertical compliance. The Infinity hubs feature a stiffer and lighter construction that’s enhanced by the ultra-reliable ID360 double ratchet system for fast engagement. The wheelset is set up for 6-bolt or center lock disc mounts and is compatible with Shimano HG9, SRAM XD, and Micro Spline freewheel bodies. It’s available in either 27.5” or 29” and ships with UST tubeless valves, spare spokes and accessories.KEY BENEFITSVersatile, dynamic trail riding performanceWide, strong rim profile with Black Shield treatment protects your rim against impacts and scratches. New lighter, stiffer Infinity hubs with ultra-reliable ID360 freewheel system for instant acceleration.More confidence and control on rugged terrain30mm wide rim is optimized for lower tire pressure, giving you a smoother ride with more traction and control. Triangular rim shape absorbs heavy impacts so you're free to bomb the descents.Most user-friendly tubeless system Fore technology fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim.
Highly resilient tough rim for urban and touring use,Double sidewalls for strength and lateral stiffness,UB Control gives the rims a higher coefficient braking surface and a smooth joint due to the digital milling process after anodisation,Tough anodised finish resists the corrosive effects of winter streets,Wear indicator is integrated into the rim,Eyeleted holes,Weight: 530 g,Discipline: CityTrail & Hybrid.
The best value fast and light rim gets wider.Offering both lightweight and a wider profile, XC 425 screams fast accelerations and grip in all situations. This sleeved rim offers simplicity and reliability and its hookless profile and tubeless compatibility (thanks to matching tape) enhance tire profile, comfort and puncture protection. Available in 28 and 32 holes, 29" onlySpecifications:Key Features:Sleeved,Traditional drilling,Non eyeleted,Tubeless Ready (Mavic UST valve recommended - not supplied with the rim),Disc,S6000 Aluminium.DimensionsETRTO size 29": 622 x 25TSS,Valve hole diameter: 6.5 mm,Tubeless tape width: 28mm (not delivered with the rim).OEM availabilityPlace: from France.
Riders seeking a strong, durable and lightweight wheelset for rugged road and gravel adventures will find this 650B diameter wheel with wider rims a perfect choice. It makes no compromises on responsiveness, durability and ease of use.The lightweight aluminum rims feature ISM4D technology, which strategically removes material from the rim where it’s not needed but keeps it around the spokes, where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Super-wide rims (25mm internal) are compatible with tubeless tires up to 64mm to absorb road shocks and vibrations. You get 5cm of “tire travel” to cushion your ride, and the smaller-diameter rims allow you to retain the agile handling you want with a drop-bar bike.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed, so no tape is required. No hassles, no added weight. Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer, and the Instant Drive 360 freewheel, coupled with our automatic bearing preload adjustment (QRM Auto), provides fast engagement, stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release.Traction, rolling efficiency and confidence on all types of terrainWider 650B rims let you run larger, high-volume tires and still maintain the responsive handling of a normal road bike5cm of plush “tire travel” improves traction and comfort, prevents pinch flats, and lets you dial in the perfect tire pressure for the terrainUST Tubeless compatibility for lower rolling resistanceSuperlight and durableISM4D rim weighs only 440gPatented lightweight aero spokesAutomatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durabilityFore drilling doesn't require the use of rim tape - 30g saved per wheelLaterally stiff and vertically compliant for a dynamic ride qualityFore technology keeps the rim upper bridge solid to make the rim stiffer17mm axle and new hub designID360 freewheel technology is 12mm compatible, convertible to quick release (15mm axle option through axle replacement)
This all-new carbon wheelset is a great choice for road riders aiming to be fast and efficient in all types of riding and racing situations. Not only does the 45mm airfoil rim slice through the wind with minimal drag, but it’s also amongst the lightest in its category. This season, the external carbon layer features our new UD² construction for a distinctive look and an even lighter rim laminate, saving another 15g per rims.A new rim laminate coupled with our exclusive Fore Carbon technology leaves the upper rim bridge intact and reinforces the rim only where needed, saving 40g per rim. The spokes attach to the rim without any need to drill the upper rim bed, so no rim tape is required. That means more weight savings (30g) and less hassle when it comes to set up or repair tubeless tyres. The new shape of the rim bed makes it easier than ever to mount and remove tires. UST Tubeless setup means no tube, so no friction, and more air volume means a smoother ride. The result is a faster ride with super low rolling resistance. At last, our patented elliptical spokes save another 5 watts.Our new Infinity hub platform optimizes the spoke lacing for efficient power transfer through highly controlled spoke tension. The Instant Drive 360 freewheel with automatic bearing preload adjustment (QRM Auto) provides fast engagement, high stiffness and added durability. It's available for Shimano and SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. It's compatible with a 12x100 axle up front, and 12x142 rear, and converts to Quick Release with supplied adapters. For Center Lock disc rotors only.These wheels are designed, engineered and patented by Mavic in Annecy, France, and are 100% handmade in our European carbon factory.Key Benefits:Accelerate and climb faster, hold higher speedNew UD² rim laminate and Fore Carbon spoke attachment save 55g and eliminate rim tape (another 30g saved per wheel) 45mm deep, 26mm wide NACA rim profile optimized for disc brakes Patented lightweight aero spokesStiffer wheel for improved power transferFore Carbon technology keeps the rim upper bridge solid and makes the rim stiffer New Infinity hub plaform: stiff axle, durable bearings and new hub design optimize lacing and spokes tension ID360 freewheel technology for instant power transferImproved UST Road delivers more speed, comfort and control in an easy to use tubeless systemNo tubes means less friction, better efficiency and grip, and a reduced risk of punctures New rim bed shape makes it easier to mount and change tires Fore Carbon drilling technology doesn't require the use of rim tape
The name Crossmax has a long history in the world of XC riding and racing and this new wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim is welded for added reliability and features a 25mm internal width with a hookless profile.The Infinity lighter hub design optimizes lateral stiffness and spokes tension. Our Instant Drive 360 freewheel with a double ratchet system provides fast engagement and top-level reliability. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies. The Crossmax is available with 6-bolt or center lock brake rotors in 29” and 27" and is compatible with a 15x110 front axle and 12x148 rear. The wheel is delivered with valves, replacement spokes and accessories.Key Benefits:Light and durable Welded rim construction for: a light and strong rim profile and a a perfectly sealed rimDynamic and agile24 double butted spokes Infinity hub platform ID360 double ratchet freewheel? systemTubeless ready technologyA tubeless rim profile and tubeless tape make it easy to ride tubeless tires for more comfort and control
A brand new 30mm E-bike specific rim that’s super strong, tubeless ready and with PFP technology. The rim is welded and laced with 28 double butted spokes on downhill inspired hubs. All the E-Deemax reliability and toughness within reach.Key Features: Strong and durable - Welded rim with Pinch Flat Protection for : Less risk of flat A super strong rim profile A perfectly sealed rim profile ,E-Bike specific and reliable construction - 28 wide double butted spokes Super reliable ID360 double ratchet freewheel system Hubs inspired by downhill practises ,Tubeless ready technology - A tubeless rim profile with tubeless tape make it easy to ride tubeless tires for more traction and less risk of flat.The name E-Deemax has become a reference for E-Bike riders, this new E-Deemax 30 lives up to its name with many of the same features and technologies as higher range model, but at a far more attainable price. One of the key factors is our Pinch Flat Protection technology, a rim design with a wider contact surface at the top of sidewall, which significantly reduces the risk of tire cuts and punctures. The rim is welded for added reliability and features a 30mm internal width with a Tubeless Ready compatibility to allow you to run lower tire pressure for better traction and control. As all our E-Deemax wheelsets, this new option is lab and field validated for a max total weight of 180Kg. Our Instant Drive 360 freewheel with a double ratchet system equips the rear hub and provide fast engagement and top-level reliability. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies. The E-Deemax 30 is available with 6-bolt or center lock brake rotors in 29” only and is compatible with a 15x110 front axle and 12x148 rear. The wheel is delivered with valves, replacement spokes and accessories.Specifications:Rims Drilling: traditional E-Bike specific rim profile Tire: UST Tubeless and tubetype ETRTO size 29": 622x30TC Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design SUP welding technology Spokes Shape: straight pull, flat Count: 28 front and rear Lacing: front and rear crossed 3 Hubs Hub available with 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Instant Drive 360 freewheel technology QRM Auto bearing preload technology Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110, rear 148) Freewheel: SRAM XD, Shimano HG9, Shimano Micro-Spline Compatible Adapters and freewheel bodies Boost : Torque Caps ([LV2374400]) Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Delivered with UST valve and accessories Pre-installed tubeless rim tape Replacement spokes (2 with the front wheel and 4 with the rear)
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall, which significantly reduces the risk of tire cuts and punctures. The wider 35mm rims allow you to run lower tire pressure for better traction, and the rims pair perfectly with trail tires ranging from 2.6 to 3.2-inch. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tires.ISM machining removes material from the rims in strategic areas to minimize weight without compromising strength, and our new Black Shield finish protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts, these 27.5” wheels are available for Shimano HG9, XD and Micro Spline freewheel bodies and come with UST tubeless valves, spare spokes and accessories.KEY BENEFITSReduced risk of flats, stronger rim profilePFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall, which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain.Increased traction, stability and controlWider 35mm (internal) rim is optimized for lower tire pressure to maximize your grip, efficiency and comfort on the trail. Rim profile is optimized for modern trail tires from 2.6 to 3.2".Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim.
Whether you’re an enduro racer or an all-mountain ripper, you need a wheel that delivers the perfect balance of strength, stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency.The Deemax Pro, weighing 1930g, gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers, including 2017/2018/2019 Enduro World Series champion Sam Hill.The rims are lightweight, yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply.The internal rim width, which affects tire shape and size, is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails.The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible, and the rear wheel comes in 12x142 or 12x148 (Boost).Ultra-responsive ride quality.28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers.ISM 4D construction, Isopulse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package.Confident handling and durability you can count on.ISM 4D rim technology minimizes weight without sacrificing strength.Maxtal alloy rims and Zicral spokes for added strength and durability.UST Tubeless for added traction and control.User-friendly tubeless technology for better traction and control with reduced risk of punctures.Wheelset ships with UST valves.
With a new, lighter weight 32mm carbon rim and easier to use Road Tubeless technology, this superlight disc-brake wheel is an instant performance boost, especially on steep climbsWhen you’re gunning for the KOM on the toughest mountain climbs, nothing gives you more of a boost than a light and snappy carbon wheelset. This newcomer in the Cosmic family takes over the venerable Ksyrium Pro Carbon SL Disc. It features a reengineered carbon rim that’s the lightest in its category. Its 32mm airfoil shape slices through wind, and because the rim is made specifically for disc brakes, you’ll have more confidence and control on the descents.The rim is crafted with a new laminate and our exclusive Fore Carbon technology that leaves the upper rim bridge intact and reinforces the rim only where needed. This saves 40g per wheel. The spokes attach to the rim without any need to drill the upper rim bed, so no rim tape is required. That means more weight savings (30g per wheel) and less hassle. The new shape of the rim bed makes it easier than ever to mount and remove tires, and you get super low rolling resistance with our UST Tubeless setup. No tube means no friction, and more air volume means a smoother, faster ride. It also uses our patented elliptical spokes to save another 5 watts and make you faster.Our new Infinity hub platform optimizes spoke lacing for efficient power transfer through highly controlled spoke tension. Our Instant Drive 360 freewheel, coupled with our automatic bearing preload adjustment (QRM Auto), provides fast engagement, high stiffness and added durability. It's available for Shimano and SRAM XD-Road and can convert to Campagnolo with an optional driver body. It's compatible with 12x100 axle up front, 12x142 rear, and you can convert to Quick Release with the supplied adapters. For Center Lock disc rotors only.These wheels are designed, engineered and patented by Mavic in Annecy, France, and are 100% handmade in our European carbon factory.Key benefitsInstant acceleration, improved climbing capabilities32mm deep/28mm wide NACA profile optimized for disc brakes Fore Carbon spoke attachment saves 40g and eliminates rim tape (another 30g saved per wheel) Patented lightweight aero spokesStiffer wheel for improved power transferFore Carbon technology keeps the rim upper bridge solid and makes the rim stiffer New Infinity hub plaform: stiff axle, durable bearings and new hub design with optimized lacing and spoke tension ID360 freewheel technology for instant power transferImproved UST Road delivers more speed, comfort and control in an easy to use tubeless systemNo tubes means less friction, better efficiency and grip, a reduced risk of punctures New rim bed shape makes it easier to mount and change tires Fore Carbon drilling technology doesn't require the use of rim tape
The reference rim for high performance wheel buildingKey Features:Maxtal,SUP / Welded,Traditional drilling,CD,UB Control,Double Eyelet,Low profile,Clincher,.DimensionsETRTO size: 622 x 15C,ETRTO size: 571 x 15C,Recommended tyre widths: 19 to 28 mm,Valve hole diameter: 6.5 mm,Recommended rim tape (width x thickness):18 x 0.6,Recommended rim tape: 571 x 18 x 0.6,Recommended nipple length: 12 mm,.Available colors / VersionsCD 32 holes,Black 32 holes,Silver 32 holes,Silver 36 holes,.TechnologiesMaxtal,SUP,UB Control,CD,.FiltersDrilling: 28,Drilling: 32,Drilling: 36,field: mountain,field: rolling,rim height: <20mm,tyre type: clincher,.Open Pro is the latest version of Mavic "Open" rims, and as such is the most advanced evolution. Optimized up to the limit of material potential, Open Pro is probably the best Road rim available.Brake track 10.3,Circumference 1988.6,Circumference 650C 1828.4,Height 18.4,Nipple contact point (ERD) 602,Nipple contact point (ERD) 26''/650C 551,Nipple contact point (ERD) 650C 551,Weight 650C 390,Weight 700C (grams) 435,Width 19.6,.
Cross-country racing puts a multitude of demands on a wheelset. You want one that helps you climb with speed and efficiency, descend with greater control, and track through the rough stuff with smooth confidence. The Crossmax SL S is a lightweight alloy wheel that does it all.Engineered with a specific rim profile that combines a 25mm internal width and our patented ISM4D technology, this wheelset can boost the performance of your bike with a price that’s accessible compared to carbon wheel options. The ISM4D process machines the rim in the areas with less stress to reduce weight without compromising strength. The rim also features our Black Shield technology, which protects against scratches and dents so you can charge hard through rock gardens and rough singletrack.The rims are made with our patented Fore technology with a fully sealed upper rim bridge that eliminates the need for rim tape. This saves 30 grams per wheel, not to mention the hassles associated with tape when setting up tubeless tires. New Infinity hub is lighter and feature a new spoke lacing which increases stiffness for better power transfer, and the Instant Drive 360 freewheel with a double ratchet provides fast engagement. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies. The Crossmax SL S is available with 6-bolt or center lock brake rotors in 29” only. It’s compatible with a 15x110 front axle and 12x148 rear, and comes with valves, replacement spokes and accessories.Best in its class alloy XC wheelsetISM4D rim machining reduces weight to close the gap to carbon rims without compromising strength. Lighter weight rims result in super low inertia and instant acceleration.Increased traction and durability25mm wide hookless rim profile optimized for lower tire pressures, resulting in improved grip in all conditions. Optimized for modern XC tubeless tires from 2.1 to 2.30". Black Shield treatment protects rims against impacts and scratches.Most user-friendly tubeless systemFore technology fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and durability of the rim.
The name Crossmax has a long history in the world of XC riding and racing and this new wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim is welded for added reliability and features a 25mm internal width with a hookless profile.The Infinity lighter hub design optimizes lateral stiffness and spokes tension. Our Instant Drive 360 freewheel with a double ratchet system provides fast engagement and top-level reliability. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies. The Crossmax is available with 6-bolt or center lock brake rotors in 29” and 27" and is compatible with a 15x110 front axle and 12x148 rear. The wheel is delivered with valves, replacement spokes and accessories.Key Benefits:Light and durableWelded rim construction for: a light and strong rim profile and a a perfectly sealed rimDynamic and agile24 double butted spokes Infinity hub platform ID360 double ratchet freewheel? systemTubeless ready technologyA tubeless rim profile and tubeless tape make it easy to ride tubeless tires for more comfort and control
This new carbon road wheel climbs and corners faster with a lighter weight 32mm rim featuring UST Road Tubeless technology and disc-brake-specific engineeringWith quick acceleration and a lightweight, efficient feel on the climbs, this newcomer in the Cosmic family takes over the venerable Ksyrium Pro Carbon UST. Carbon rims and disc-brake control gives you an added advantage in the mountains and hills. It features the same rim as our pro-level SLR 32 model, which means superlight full carbon construction for easier climbing and instant acceleration.The 21mm internal rim width is optimized for 28mm tires to deliver a smooth, efficient ride on a variety of road surfaces. And new refined spokes help make this rim 80g lighter than its predecessor. Our new Infinity hub platform adds stiffness, so the wheels feel quick and responsive out of every corner.Our Road Tubeless system lets you run lower tire pressure for improved rolling efficiency, a smoother ride quality, and a reduced risk of flats. The new rim bed shape makes it easier than ever to mount and remove tires. If your typical rides include tough climbs, technical cornering and descents, the Cosmic SL 32 Disc is a fast, easy way to supercharge your road bike.These wheels are designed, engineered and patented by Mavic in Annecy, France, and are 100% handmade in our European carbon factory.Fast climbing and snappy accelerationReduced inertia of a lighter weight rim delivers instant accelerationNACA inspired rim shape (32mm deep) minimizes aerodynamic dragFlat double-butted spokes save weight and improve responsivenessLaterally stiff for improved power transferOur new Infinity hub plaform optimizes lacing and spoke tension to improve wheel stabilityStrong hub axle and ID360 freewheel technology for instant accelerationImproved UST Road delivers more speed, comfort and control in an easy to use tubeless systemNo tubes means less friction, better efficiency and grip, a reduced risk of puncturesNew rim bed shape makes it easier to mount and change tires
The best value for money on the marketFeatures6106 aluminum alloyPinnedTraditional drillingUB ControlNon eyeletedTubetypeDiscDimensionsETRTO size 26": 559 x 19CETRTO size: 622 x 19CValve hole diameter: 8.5 mm, supplied with valve adapterETRTO recommended tyre sizes: 35 mm to 69 mm (1.3" to 2.7")Recommended rim tape 26": 559 x 20 x 0.6Recommended nipple length: 12 mmAvailable colors / VersionsBlack 32 holesTechnologiesUB ControlFiltersDrilling: 32Drilling: 36Use: All mountainbrake type: discdiameter: 26"diameter: 29"tyre width: 1.50 to 2.30 Wide enough to use large volume tyres, and specially designed with the constraint of disc brakes in mind, XM 119 Disc is one of the highest quality entry level rims on the market. Available in 26"/27.5"/29".Weight 26''/650C 480Weight 27.5" 525Weight 29" 550
With a wide 22mm rim profile that's optimized for high-volume tires, this UST Road Tubeless wheel system is built for adventure.Perfect for riding on rough roads, gravel or dirt, it gives you the smooth-riding performance of tubeless tires and makes it easy to set them up without any hassles. Low rolling resistance and a reduced risk of punctures add up to a better overall riding experience, especially on rugged terrain.The wheels are engineered for the unique demands of disc brakes, built up with 24 straight-pull spokes, which are stronger than J-bend spokes. So wherever the road goes, and however rough it gets, you're ready to keep things rolling.Key Features:Purpose-built for riding rough roads, gravel or dirt.,22mm wide rim takes tire up to 62mm.,UST Road Tubeless technology improves comfort and rolling resistance, and reduces the risk of punctures.,Compatible with all standard retention systems.,Proven performance and reliability at an attainable cost.,High-quality QRM cartridge bearings.,Disc-brake-specific, sleeved-style rim technology.,Straight-pull round spokes, which are stronger than J-bend spokes.,Rolling efficiency and a nimble ride quality.,Sleeve joint rim minimizes weight.,Consistent and stable spoke lacing.,Low-friction hubs..CompatibilityFront axle: 12mm thru axle, easily convertible to quick release with included adapters. Convertible to 15mm with complete axle replacementRear axle: 12mm thru axle, convertible to Quick Release with included adaptersFreewheel: Shimano/Sram, convertible to Campagnolo and XD-R with optional driver bodiesHubsAuto adjust sealed cartridge bearings (QRM Auto), front and rearFreewheel: Instant Drive 360 steelFront: Quick release, 12x100 and 15x100 through axle compatibleRear: Quick Release, 12x142 and 12x135 compatibleFront and rear bodies: aluminumAxle material: aluminumCompatible Adapters and freewheel bodiesID360 Shimano / Sram freewheel body (LV3430100 - Delivered on the wheel)ID360 XD-R freewheel body (LV2580100)ID360 Campagnolo freewheel body (LV3440100)ID360 Shimano / Sram Light freewheel body (LV3850100)12x135 rear axle adapters (LV2510900)12 to 9mm rear adapter for quick release (LV2510800 - Delivered with the wheel)12x142 rear axle adapters (LV2510700 - Delivered with the wheel)15mm axle (LV2373500)12 to 9mm front adapter for quick release (LV2680300 - Delivered with the wheel)Intended UseMax. Pressure: see indication on wheel and tyre. If they differ, use the lowest of the 2For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 2 : road and offroad with jumps less than 15cmRecommended tyre sizes: 28 to 64 mm (1.1" to 2.5") VersionsDisc standard : 6 Bolts or Center Lock(R)Color: Black only