Genuine replacement Manitou HexLock SL thru-axle.
Genuine replacement Manitou Boost spaced HexLock SL thru-axle.
Genuine Manitou suspension fork bushing kit to servicing and rebuilding Manitou Mattoc suspension forks.
Genuine replacement Manitou spring spacer kit for Magnum suspension forks.
This versatile mountain bike (MTB) fork features a hard-wearing straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way. Expert Air Spring This trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Variable Terrain Tune - 3-Position Compression Adjust When developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain. Chassis When developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch. Item Top Features Continued: Max Tyre Size: 68mm 77mm (27.5"+), 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mm
Ready for the trails, this Boost-spaced MTB fork is equipped with a robust straight-wall aluminium leg construction that makes it hard-wearing against impacts and obstacles. Its high-quality 32mm chassis is also kitted out with a 1.5" tapered steerer tube and a forged hollow crown for excellent strength as well as keeping its weight low. With a range of adjustments, this model's Expert Air spring, ABS+ compression damping and In-leg adjustable TPC rebound damping makes it easy to dial in your personal riding preferences. This makes it a great choice of upgrade for riders who want smooth and dependable shock absorption and control as they conquer their way around the mountain. Item Top Features Continued: Max Tyre Size: 61mm with fender, 69mm without Offset: 40mm (20"); 42mm (24") Ride Height: 390-430mm (20"); 455-500mm (24") Travel: Multiple options available to select E-Pac: Yes Manufacturer's Part Numbers: 191-36151-A101 Matt Black 20" 100mm 191-36151-A102 Matt Black 20" 120mm 191-36152-A101 Matt Black 24" 100mm 191-36152-A102 Matt Black 24" 120mm 191-36152-A103 Matt Black 24" 145mm
This versatile MTB fork features 7000-series butted-wall aluminium legs, which allows it to deliver tremendous strength, stiffness and control on your off-road adventures. With a powerful Dorado Air spring with IVA, VTT Pro damper and Half Cartridge adjustable TPC rebound damping, this model is ready for whatever the mountain has to offer. Manitou has also equipped this version with a wide range of adjustments including three-position compression (Open, Trail, Lock) with Open Mode Adjust. This allows MTB and XC riders to benefit from a more rider-tuned feel that perfectly matches their style as well as the terrain conditions. VTT Pro Damper Rock-solid lockout without compromise. Thanks to independent shim stacks you no longer need to lose sensitivity in your open positions to achieve a true lock-out. This means you can still crank climbs without bobbing and blast through rock gardens without shattering your forearms on the same ride. Dorado Air Spring with IVA As the name suggests this air spring is derived from Manitou's legendary Dorado DH fork. Dorado air features a unique balancing valve that equalises pressure between the positive and negative air chambers during the air fill process. This provides the fork with a consistent feel without any flat or dead spots in the stroke. To manage the volume Manitou have included its Incremental Volume Adjust (IVA). The IVA is a self-contained volume reduction system that allows greater ramp-up change than conventional adjustment systems without the need for additional parts. Technologies: VTT Pro Variable Terrain Tune - Adjustments: 3-Position Compression Adjust With Open Mode Adjust: When developing the VTT Pro damper Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that choke off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support without getting wollowy. This is achieved thru independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted Manitou can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain. Dorado Air: For 32mm chassis Manitou are adapting its proven Dorado Air to fit the needs of shorter travel riders. The Manitou Dorado Air spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. For R7 Manitou have tuned the volumes in each chamber to give ideal support and feel for shorter travel. Also included on the air leg is its Incremental Volume Adjust (IVA). The IVA modifies the volume in the positive air chamber with a set of self-contained spacers that dictate the fixed position of the IVA piston. This self-contained volume reduction system allows greater ramp-up change than conventional adjustment systems without the need for additional parts. Chassis: When developing the chassis of any Manitou fork the primary goal is finding the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch Manitou are able to position the arch further away from the axle. The lower tire clearance behind the fork relative to the center of the axle allows for a shorter arch which yields 13% increased stiffness compared to a conventional forward arch fork of the equivalent weight. Because of this, Manitou are able to use 32mm stanchions to save weight while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch. Item Top Features Continued: Max Tyre Size: 68mm 77mm (27.5+), 68mm (29) Offset: 37mm (27.5") 44mm (27.5+/29") Ride Height: 471-511mm (27.5") 485-525mm (27.5+/29") Travel: Multiple options available to select E-Pac: No Manufacturer's Part Numbers: 191-36973-A001 Black 27.5" x 100mm 37mm 191-36973-A002 Black 27.5" x 120mm 37mm 191-36977-A001 Black 27.5+/29" x 100mm 44mm 191-36977-A002 Black 27.5+/29" x 120mm 44mm
Whether you're shredding with your friends after work or exploring new trail routes on your own, this high-quality fork is engineered for reliable performance. It features a durable 6000-series straight wall aluminium leg construction, which makes it ideal at handling the knocks and bumps that are associated with all-day epics in the mountains. Manitou has also equipped this model with a TS Air spring, Kwik Toggle compression damping as well as In-leg adjustable TPC rebound damping. This means that riders can set it up to perfectly match their riding style as well as the terrain conditions. Inspired by the brand's renowned Absolute+ technology, this version's Kwik Toggle compression damping also achieves on/off lockout simplicity in a lightweight, practical package. Item Top Features Continued: Max Tyre Size: 68mm (27.5") 77mm (27.5+), 68mm (29") Offset: 37mm(27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") Travel: Multiple options available to select E-Pac: No Manufacturer's Part Numbers: 191-36971-A002 Black 27.5" x 120mm travel 191-36971-A003 Black 27.5" x 100mm travel 191-36975-A002 Black 27.5+/29" x 120mm travel 191-36975-A003 Black 27.5+/29" x 100mm travel
Ready to carry you to the top of the podium, this stunning duo features a deep hollow-forged aluminium crown for amazing toughness as you battle through the most aggressive of rides. Additionally, its 7050 butted aluminium legs provide another layer of durability and longevity as you blast across unpredictable terrain conditions against the clock. Adjustable MTB Forks Perfect for tackling every off-road challenge, these forks are equipped with some of the finest adjustable features to have you shredding with style. Their adjustable low and high speed compression damping, hydraulic bottom-out circuit and a fully adjustable air spring gives you the tools to dial in your ride exactly how you want it. As a result, you'll benefit from being able to easily customise these to match your specific riding style, discipline or terrain conditions. Technologies: Reverse Arch: Reverse Arch has equivalent stiffness with less weight. By placing the arch in the rear, behind the high point of the tyre, Manitou’s reverse arch design achieves equivalent stiffness with less weight. The arch is shorter in height, resulting in more efficient use of material. MC² (Multi-Control Compression): Manitou’s MC² (Multi-Control Compression) Damper comes in a fully sealed bladder cartridge offering independent Lo Speed and Hi Speed Compression adjustments. TPC Rebound: Two Stage Shim Stack to better isolate low speed and high speed rebound damping. Optimizes the rebound response for short travel chatter and deep travel hits without the complexity of adding in another adjuster. Bladder Cartridge: The sealed system separates air from the oil in the damper maintaining damping consistency in the most severe riding conditions. The new Mezzer bladder cartridge reduces the oil volume resulting in a lower overall weight. At the same time it assures a low brake away force from optimized shaft seal design. Blow Off Valve: Patent pending bladder blow off valve prevents over pressurisation and rupture of the bladder. HBO (Hydraulic Bottom Out): The internal HBO circuit ramps up damping during the final 30mm of travel protecting you from hard unexpected bottom-outs. Dorado Air: Our lowest weight World Cup proven high performance air spring technology offering ultimate sensitivity, featuring a self equalizing” negative air spring. Originally developed for the Dorado down hill fork, Dorado air has a single fill valve (on the bottom of the fork) that simultaneously fills the positive and negative air chambers, so the pressure is equalised. IRT (Infinite Rate Tune: Infinite Rate Tune (IRT) allows the rider to control mid stroke support and bottom out progressivity independent from initial spring rate to independently tune small bump sensitivity and big hit performance. Hollow-bore Crown: Chassis stiffness and weight optimized with Manitou’s patented Hollow-Bore Crown. Low Friction Wipers: Proprietary SKF low-friction rubber compound and sealing lip profile to further reduce the friction in the Mezzer. New Hexlock SL2: The new tooled Hexlock SL2 axle saves 26g over the previous version). Manufacturer's Part Numbers: 191-36235-A001 Black 27.5" 180mm - 44mm Option 191-35561-A001 Black 29" 180mm - 51mm Option 191-36235-A101 Black 27.5" 180mm - 37mm Option 191-35561-A101 Black 29" 180mm - 44mm Option
Using the same chassis as Manitou's Mezzer Pro suspension fork, this model features 37mm stanchions that are constructed from 7000 series aluminium and Reverse Arch technology. This allows it to deliver exceptional stiffness and strength, while also being incredibly lightweight at only 2030g (27.5” option). As a result, the Expert is the second lightest fork in the Enduro category, second only to the Mezzer Pro of course. Another highlight is it comes race-ready with an Expert Air air spring with Incremental Volume Adjust (IVA) for an impressively smooth feel as you charge across challenging terrain conditions. It also offers a wide range of adjustment features from its Variable Terrain Tune (VTT) damper that can easily be tweaked to suit any terrain thanks to its six positions. With adjustable Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock), this suspension fork is the smart choice for anyone looking to dive into the Enduro Fork market. Enduro Fork with Expert Air Spring Expert Air is derived from Manitou's Dorado Air system and features a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This valve is activated only when the pump is threaded completely onto the valve. This gives the spring rate a smooth and consistent feel without any flat or dead spots in the stroke. Six Position Variable Terrain Tune (VTT) Damper Adjusted through a single external compression adjuster, both high-speed and low-speed damping characteristics are changed simultaneously when turning the knob. The damper features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. In positions 1 and 2 there is an open flow path through the compression damper. In positions 3-6, the adjustable shim stack comes into contact with the piston, increasing platform force. This design provides a wide tuning range that combines the benefits of a low-speed platform and a high-speed progressive tune that can suit any terrain through 6 positions. Hexlock SL Axle Manitou's patented hex axle locks the lower legs in place, eliminating rotation around the axle providing unsurpassed stiffness in a lightweight tooled package. Additional Item Top Features: Adjustments: Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock) Offset: 37/44OS (27.5" Option); 44/51OS (29" Option) Ride Height: 534-574mm (27.5" Option); 554-594mm (29" Option) Travel: Multiple options available. Internally adjustable in 10mm increments Brake Post Mount: 180mm (223mm Max) Max Tyre Size: 69mm w/ Fender 74mm Without Optional: Fender Kit (sold separately) E-Pac: Yes 44OS 140-180 (27.5" Option); 51OS 140-160mm (29" Option) Technologies: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness. - Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. - IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self contained spacers. You'll never lose a volume spacer again. - VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. - Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. - TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built up air within the lower legs to keep things butter smooth between service intervals. Manufacturer's Part Numbers: 191-36964-A101 Black 29" x 180mm 44mm 191-37137-A101 Black 27.5" x 180mm 37mm 191-36964-A103 Black 29" x 160mm 44mm
Genuine Manitou replacement parts for breathing new life back into your suspension forks.
This versatile fat bike fork is equipped with a robust straight wall aluminium leg construction, which makes it more than capable of handling the impacts and intensity associated with trail-riding. Available in either a standard or an extended ride height option, the standard version fits up to 26×4” / 27.5×3.8” tyres, while the extended version fits up to 26×5.15” / 27.5×4.5” tyres. Engineered to perform well in winter or summer riding conditions, this model is also kitted out with an Expert Air spring with IVA, VTT compression damping and In-leg adjustable TPC rebound damping. This makes it easy for riders to fine-tune it to perfectly match their riding style as well as the terrain. Item Top Features Continued: Max Tyre Size: Size 26x4"/27.5x3.8" (Standard); 26x5.15"/27.5x4.5" (Extended) Offset: 51mm Ride Height: 493-551mm (Standard); 513-571mm (Extended) Travel: 120mm E-Pac: Yes Manufacturer's Part Numbers: 191-35528-A102 Matt Black Standard 120mm 191-35528-A602 Matt Black Extended 120mm
Specifically developed for dirt jump and slopestyle riders, this suspension fork is kitted out with 7000-series straight wall aluminium legs for an excellent balance of strength and durability in demanding terrain conditions. Available in a range of travel options to choose from, its travel is also internally adjustable so you can fine-tune it to match your riding style. Another highlight is it's compatible with post mount disc brake rotors, so you'll enjoy its reliable front end suspension performance combined with powerful and consistent braking. ACT Air Spring and ABS+ Jump Stack Damping No stranger to the finer details, this dirt jump ready suspension fork is fully kitted out with a range of adjustments to deliver a more rider-tuned feel on your bike. Its lightweight ACT Air air spring smoothens out your ride, while its ABS+ Compression Damping with Jump Stack makes it all set for big hits and fast jumps. Coming complete with adjustable air, compression and TPC Rebound Damping, this model makes it easy to dial in your ideal settings to match your style as well as the terrain conditions. The Circus project started as a way to get our slope-style riders into competition; but it wound up becoming an industry leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade. Additional Item Top Features: Leg Diameter: 32mm Ride Height: 458-478mm (100mm Option); 498-508mm (130mm Option) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Steerer: Multiple options available to select Travel: Multiple options available to select Crown: 1-1/8" Option: Hollow Beam; Tapered Option: Forged Beam Technologies: - 80/100mm or 120/130mm Internally Adjustable Travel (choose travel option from drop-down menu). - Air Spring. - ABS+ Compression Damping with Jump Stack. - Adjustable TPC Rebound Damping. - Wheel Size: 26". Manufacturer's Part Numbers: 191-29495-A801 Black 26" x 100mm 1.1/8" 191-29495-A803 White 26" x 100mm 1.1/8" 191-29495-A808 Black 26" x 130mm Tapered 191-29495-A806 White 26" x 130mm Tapered 191-29495-A807 Black 26" x 100mm Tapered
This air piston kit is a genuine replacement for use with Manitou suspension forks.
This air piston also comes supplied with Manitou Slickoleum grease for smooth and efficient installation and performance throughout use.
This piston kit is ideal for restoring and rebuilding the piston on Manitou Expert Air spring suspension forks. It's compatible with Mattoc. Magnum and Mastodon forks and brings their level of performance back to how your suspension fork was when new.
This shock pump features a micro-release valve to fine-tune your suspension's air pressure, inflates up to 300 psi and is equipped with a 360° swivelling hose attachment. Plus, it's shaft and barrel are engineered from high-strength aluminium for a strong and lightweight pump that's easy to carry in your jersey pocket or backpack.
This rebuild kit is a complete service kit from Manitou and features all genuine Manitou hardware to get your forks back to their top performance.
This service kit is compatible with Manitou Markhor, M30 and R7 suspension forks and includes all the seals for a complete fork rebuild, giving your forks a new lease of life.
This kit features an air piston and compression rod and is an exact replacement to get your forks back to top-level performance.