This models integrated skid plate protects your chainrings from rocks, roots and literally any trail obstacle that requires you to roll over it. The top of the frame mounting area has a raised fin, which will also prevent the chain from dropping behind the chainring and into the bottom bracket shell area of the frame. If you prefer to run the V2 as a chain guide only, then the skid plate can be removed and the dual pulley chain retention device will still perform to the same high level.
With this part installed on your forks, there is no more need to tinker around with bottomless tokens or spacers to find the right travel progression. This means you can quickly tweak the fork’s volume control on the go, which is ideal if you’re out on an all-day session on different types of trails. Being able to tune both the air pressure and the damper settings enable you to prevent bottom-out and to isolate big hits. Compatibility: RockShox Model A · will fit 2013-2016 Pike forks with 15x100 axle spacing. Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, 26” and 27.5” forks. · will fit 2010 - 2017 and Boxxer World Cup (air-sprung) forks. Not compatible with Dual Position Air forks. RockShox Model B · will fit 2015 and newer Pike forks with "Boost" 15x110 axle spacing and all 2017 and newer Pike forks (regardless of axle spacing). Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, 26” and 27.5” forks. · will fit all 2017 and newer Lyrik and Yari forks. Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, 26” and 27.5” forks. · will fit all 2017 and newer Revelation (35mm). Not compatible with Dual Position Air forks. Recommended for 140mm+ 29”, 27.5+, and 27.5” forks. · will fit 2020 Boxxer World Cup (air-sprung) forks. Not compatible with Dual Position Air forks. RockShox Model C · will fit 2013-2016 Pike forks with 15x100 axle spacing. Solo air models only. Recommended for 120 and 130mm 29” and 120mm 26” and 27.5” forks. Not compatible with Dual Position Air forks. Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” and 26” forks. RockShox Model D · will fit 2015 and newer Pike forks with "Boost" 15x110 axle spacing, all 2017 and newer Pike forks (regardless of axle spacing). Not compatible with Dual Position Air forks. Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” and 26” forks. · will fit all 2017 and newer Revelation (35mm). Not compatible with Dual Position Air forks. Recommended for 120 and 130mm 29”/27.5+ and 120mm 27.5” forks. RockShox Model E · will fit 2013 and newer Reba, Revelation (32mm models only), and SID forks and 2014 and newer Rock Shox Bluto forks. Not compatible with Dual Position Air forks. Recommended for 100-140mm 29”, 27.5+, 27.5”, 26”, and Fat forks. RockShox Model F · will fit 2020 and newer Zeb forks. Not compatible with Dual Position Air forks. Compatible with all travels and both wheel-size options. Fox Model A · will fit 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers. Recommended for 140-160mm 29”, 27.5+, and 27.5” forks. Fox Model B · will fit 2016 and newer Fox 34 Float forks with the FIT 4 and Grip dampers. Recommended for 110-130mm 29”, 27.5+, and 27.5” forks. Fox Model C · will fit 2016 and newer Fox 32 Float forks with the FIT 4 and Grip dampers. Recommended for 100-130mm 26”, 27.5” and 29" forks. Fox Model D · will fit 2015-2017 Fox 36 Float forks with the FIT 4, RC2, and Grip dampers. Recommended for 140-180mm 29”, 27.5+, and 27.5” forks. Fox Model E · will fit 2016 and newer Fox 40 Float Factory and Performance Elite forks. Fox Model F · will fit 2018-2020 Fox 36 Float forks with the FIT 4, RC2, and Grip dampers. Recommended for 140-180mm 29”, 27.5+, and 27.5” forks. · will fit 2019-2021 Marzocchi Z1, all travel options. Fox Model G · will fit 2021 and newer Fox 38 Factory and Performance forks.
Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur.
This race-ready mountain bike (MTB) fork is equipped with 35mm stanchions along with MRP's finest technologies to give all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance. Enduro MTB Fork with Coil Spring The Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil. Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have. Technologies: ChocoLUXE Internals: - ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It’s highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: - Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They’re exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control™ technology. New EssenTTial™ twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast™ arch design with forward-facing weight reliefs to mitigate mud build-up. PSST™ pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions. Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mm
Ready for the rigours of enduro racing and all mountain riding terrain conditions, this versatile mountain bike (MTB) fork is kitted out with 35mm stanchions, combined with MRP's renowned technologies for fantastic front-end suspension performance wherever your next ride takes you. This model is equipped with Boost axle spacing, which gives it additional stiffness and strength as you tackle unpredictable, mixed terrains, while also ensuring smooth, effective and consistent handling as you weave between the trails. MRP Ribbon forks have received updates including the ChocoLUXE internals and Norglide Bushings, providing less stiction and better-than-ever performance. Enduro Forks with Adjustable Air Spring System MRP's goal in designing the Ribbon was seemingly impossible: building on the success of the heralded Stage, create a fork with higher performance, more adjustability, more features, all at a significantly lower weight. Those incredible demands meant that the brand had to reimagine elements like casting design, reconfigure damper architecture, and completely retarget performance goals. The result is not just the best fork they've ever produced, they've classed it as the new industry benchmark. With other features like the highly tuneable FulFill air-spring, low-pressure IFP damper, PSST pressure relief valves, and Outcast arch design and the acclaimed Ramp Control™ technology, this is the enduro fork to have. Technologies: ChocoLUXE Internals: - ChocoLUXE is a proprietary material utilised in the air-spring sealhead, damper plug, damper seal, damper IFP, and damper support. It’s highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to changing with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: - Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They’re exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. FullFill™ air-spring system with independently adjustable positive and negative air-chambers for greater tunability. New EssenTTial™ twin-tube, bladder-free damper utilizing a low-pressure IFP. Outcast™ arch design with forward-facing weight reliefs to mitigate mud build up. PSST™ pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions. Manufacturer's Part Numbers: FKMRR7151 Black 27.5" 150mm 44mm FKMRR7152 Black 27.5" 160mm 44mm FKMRR7164 Black 29"/27.5"+ 150mm 46mm FKMRR7165 Black 29"/27.5"+ 160mm 46mm
Built for the demands of modern downhill racing and gravity MTB riding, this chain guide features the refreshed design of MRP's renowned, championship-winning "G" guide. Coming equipped with a co-moulded HD2 upper guide, this model uses a softer durometer thermoplastic polyurethane (TPU) material on the interior walls and ceiling to silence drivetrain chatter. This allows it to deliver silent guidance as you tackle the more demanding of terrain conditions on your ride. MRP has also equipped this version with a tracked and grooved upper guide with an alloy backplate interface that increases stiffness and eases installation, while its integrated skid protects your chainrings and glides over rocks and obstacles. Coming complete with a standard pulley and G-slide slider block, this chain device ensures quiet, dependable operation in muddy and dank conditions. Technologies: - Upgrades to the G5 include the "HD2" co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. - Tracked and grooved upper guide/backplate interface increases stiffness and eases installation. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Mounting hardware included and installation is possible with just a single 4mm HEX wrench. - Swingset™ hardware. - Compatible with chain lines 50mm and wider. Manufacturer's Part Numbers: CHMRG5L5K Black 36/40T CHMRG5M5K Black 32/36T
Ready for long days on your favourite local mountain bike trails, this E-MTB upper chain guide features a tough polycarbonate construction for maximum strength on the more demanding of terrain conditions. Specifically tailored for electric mountain bike riding, this model is equipped with a Shimano E8000/E7000 compatible mount for easy integration with your drivetrain set-up. The 1x guide is the definitive E-MTB chain guide. Used on the cross-country (XC) World Cup circuit and even in the Olympics, the 1x has a proven track record of dependability and performance. This version is specially developed for the rigours of electric mountain bike riding. MRP has been securing and protecting the drivetrains of winners for over twenty years. Depending on your needs, MRP have a guide perfect for you. Whether you're looking to extend the life of your drivetrain by preventing drops from chainring wear, hucking into rock gardens for the fun of it, or looking for precious seconds by taking any line on the racecourse, these guides will enhance your ride. Manufacturer's Part Number: CHMRUVESK Black 34/38T
Ready for the demands of downhill mountain bike racing and gravity riding, this chain device features a carbon backplate that offers fantastic stiffness, durability and an overall low weight on your ride. MRP has also kitted out this model with a co-moulded HD2 upper guide that uses a softer durometer thermoplastic polyurethane (TPU) interior for silent guidance as you fire down the trail. Another highlight is its upper guide/backplate interface that's tracked and grooved, which offers increased stiffness and eases installation. Carbon Chain Guide with Integrated Skid MRP has specifically designed this model for the rigours of modern downhill racing and gravity riding. As a result, it comes equipped with an integrated skid that protects your chainrings against damage, while it glides over rocks and obstacles. This makes it capable of handling the demands of racing across unpredictable terrain conditions with rock gardens, tree roots and debris. Also included in this model is a standard pulley and G-slide slider block that assists with quiet, reliable operation even in muddy conditions. With a refreshed design, the MRP G5 SLR Carbon Chain Device is a great choice of upgrade for riders who want championship-winning performance from the brand's renowned "G" guide. Technologies: - Tracked and grooved upper guide/backplate interface increases stiffness and eases installation. - Co-moulded "HD2" upper guide with softer durometer interior for silent guidance. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. Manufacturer's Part Number: CHMRG5C5K Black 36/40T CHMRG5D5K Black 32/36T
Perfectly suited to the increasingly popular all-mountain segment, the mrp amg v2 model shares the freshly updated "TR" upper guide with the 1x unit, and adds MRP's patented integrated skid. This All-Mountain Guide (AMG) is a great choice for 120-150mm (5-6") travel bikes when used with the latest tensioned rear derailleurs or on its own for shorter-travel trail bikes or hardtails that require bash protection. The contact-free, "upper-only" chain retention on the MRP AMG V2 alloy chain guide means it's virtually silent and completely drag-free when pedalling. The patented integrated skid will protect your crank and chainring and prevent the chain from ever contacting and potentially damaging your expensive frame. Please note: The 32-38t ISCG option comes as a plain black chain guide without MRP logos. Image is for demonstration purposes only.
As the AMg guide has no chain retention device that is rarely needed with modern narrow/wide chainrings and clutch derailleurs, this guide is drag free when pedalling and still provides trail obstacle protection, as the skid plate is still present.
The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability. - 50mm (standard). - Tooth faces displaced from nominal centreline to provide active and positive lateral engagement of every chain link with a chainring tooth. - Alternating lateral force to each chain link to actively retain links to the ring. - Less surface contact between chainring and chain creating minimal friction and maximum retention. - Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance. - Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRWR28 Black 28T 9/10/11 Speed CRMRWR30 Black 30T 9/10/11 Speed CRMRWR32 Black 32T 9/10/11 Speed CRMRWR34 Black 34T 9/10/11 Speed CRMRWR36 Black 36T 9/10/11 Speed
The Wave pattern applies alternating lateral force to each chain link to actively retain links to the ring - going beyond narrow/wide implementation that relies solely on friction. MRP’s Wave tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The Wave design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many “Achilles’ Heels” of narrow/wide designs. Designed with mindful consideration of system friction, the Wave design actively engages the chain but yields much less concentrated wear than competing designs, spreading the load over large surface areas instead. Machined from durable, long-wearing 7000-series aluminium. Wave Chainring Technology Advancements The MRP Wave chainring technology utilises a host of features to provide robust chain handling and retention characteristics while providing market-leading durability. Technological features and benefits include the following: - 49mm (standard) chainline - Tooth faces displaced from nominal centerline to provide active and positive lateral engagement of every chain link with a chainring tooth. - Alternating lateral force to each chain link to actively retain links to the ring. - Less surface contact between chainring and chain creating minimal friction and maximum retention. - Equal tooth thickness on the entire chainring to allow for maximum mud-shedding clearance. - Tooth design allows for reduced weight chainrings over competitor technology. Manufacturer's Part Numbers: CRMRWG28 Black 28T 9/10/11 Speed CRMRWG30 Black 30T 9/10/11 Speed CRMRWG32 Black 32T 9/10/11 Speed CRMRWG34 Black 34T 9/10/11 Speed CRMRWG36 Black 36T 9/10/11 Speed
The MRP 1x chain guide is the result of 20+ years of chainguide experience with the help of design cues from its V3 series. This model boasts a stiff and light glass-filled composite backplate alongside a durable nylon upper guide to add major chain retention to your 1x10, 11 or 12-Speed drivetrain for outstanding quality and performance.
Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur.
This superb model sits neatly behind your crankset, providing optimal protection for your chainrings. Additionally, it has the additional advantage of gliding over rocks and obstacles that it may come into contact with, when out on the trail.
MRP Ramp Control Suspension Fork CartridgeProduced to fit a range of RockShox & Fox forks (see compatibility table below), this MRP Ramp Control Cartridge is a quick and easy way to upgrade your forks. The Ramp Control Cartridge has been manufactured to thread into the air spring of your forks for total personalisation of fork progression without the need to tinker with Bottomless Tokens or spacers.Customise Your ForkOptimising your fork is so quick and simple with this Ramp Control Cartridge as adjustments are made with the turn of a dial. Tweak your volume control 'on the fly' and tackle immediate terrain with optimal volume adjustments. The Ramp Control Cartridge allows tuning of the fork through air pressure and damper settings, resulting in the isolation of big hits and the dreaded bottom-out.The Ramp Control Cartridge means no more time-consuming tinkering with internally accessed volume spacers, simply turn the cartridge dial to control you volume adjustments.Features:Custom tune to suit any terrainOptimal performanceWeight: 55gCompatibility Chart Compatible Forks MRP Ramp Control Cartridge Model RockShox Pike 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended for 140mm+ 29" and 130mm+ 26"/27.5" - See Model C for short travel Pike Non-Boost forks. RockShox Model A RockShox Boxxer World Cup 2010-2016. Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model A RockShox Pike 2015-2016 15x110 (Boost). Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike 2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Lyrik 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Yari 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike Short Travel 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model C RockShox Pike Short Travel 2015-2016 15x110 (Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Pike Short Travel 2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Lyrik Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Yari Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Reba 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Revelation 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Sid 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Bluto 2014-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 140mm+ 29", 27.5+, and 27.5" forks. Fox Model A Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 110-130mm+ 29", 27.5+, and 27.5" forks. Fox Model B Fox 32 2016 with FIT4/Grip Dampers 80-130mm 26"/27.5"/29". Not recommended for 80-90mm forks. NOT COMPATIBLE WITH 140-150mm FORKS. NOT COMPATIBLE WITH FOX 32 STEP CAST FORKS. Fox Model C Fox 36 2015-2017 with Float air spring. Compatible w/ 2015-Current 26/27.5/29 Fox 36 forks in all travels w/ Float Air Spring. NOT COMPATIBLE WITH TALAS AIR SPRING. Fox Model D Buy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ramp Control Suspension Fork CartridgeProduced to fit a range of RockShox & Fox forks (see compatibility table below), this MRP Ramp Control Cartridge is a quick and easy way to upgrade your forks. The Ramp Control Cartridge has been manufactured to thread into the air spring of your forks for total personalisation of fork progression without the need to tinker with Bottomless Tokens or spacers.Customise Your ForkOptimising your fork is so quick and simple with this Ramp Control Cartridge as adjustments are made with the turn of a dial. Tweak your volume control 'on the fly' and tackle immediate terrain with optimal volume adjustments. The Ramp Control Cartridge allows tuning of the fork through air pressure and damper settings, resulting in the isolation of big hits and the dreaded bottom-out.The Ramp Control Cartridge means no more time-consuming tinkering with internally accessed volume spacers, simply turn the cartridge dial to control you volume adjustments.Features:Custom tune to suit any terrainOptimal performanceWeight: 55gCompatibility Chart Compatible Forks MRP Ramp Control Cartridge Model RockShox Pike 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended for 140mm+ 29" and 130mm+ 26"/27.5" - See Model C for short travel Pike Non-Boost forks. RockShox Model A RockShox Boxxer World Cup 2010-2016. Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model A RockShox Pike 2015-2016 15x110 (Boost). Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike 2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Lyrik 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Yari 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike Short Travel 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model C RockShox Pike Short Travel 2015-2016 15x110 (Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Pike Short Travel 2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Lyrik Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Yari Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Reba 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Revelation 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Sid 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Bluto 2014-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 140mm+ 29", 27.5+, and 27.5" forks. Fox Model A Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 110-130mm+ 29", 27.5+, and 27.5" forks. Fox Model B Fox 32 2016 with FIT4/Grip Dampers 80-130mm 26"/27.5"/29". Not recommended for 80-90mm forks. NOT COMPATIBLE WITH 140-150mm FORKS. NOT COMPATIBLE WITH FOX 32 STEP CAST FORKS. Fox Model C Fox 36 2015-2017 with Float air spring. Compatible w/ 2015-Current 26/27.5/29 Fox 36 forks in all travels w/ Float Air Spring. NOT COMPATIBLE WITH TALAS AIR SPRING. Fox Model D Buy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ramp Control Suspension Fork CartridgeProduced to fit a range of RockShox & Fox forks (see compatibility table below), this MRP Ramp Control Cartridge is a quick and easy way to upgrade your forks. The Ramp Control Cartridge has been manufactured to thread into the air spring of your forks for total personalisation of fork progression without the need to tinker with Bottomless Tokens or spacers.Customise Your ForkOptimising your fork is so quick and simple with this Ramp Control Cartridge as adjustments are made with the turn of a dial. Tweak your volume control 'on the fly' and tackle immediate terrain with optimal volume adjustments. The Ramp Control Cartridge allows tuning of the fork through air pressure and damper settings, resulting in the isolation of big hits and the dreaded bottom-out.The Ramp Control Cartridge means no more time-consuming tinkering with internally accessed volume spacers, simply turn the cartridge dial to control you volume adjustments.Features:Custom tune to suit any terrainOptimal performanceWeight: 55gCompatibility Chart Compatible Forks MRP Ramp Control Cartridge Model RockShox Pike 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended for 140mm+ 29" and 130mm+ 26"/27.5" - See Model C for short travel Pike Non-Boost forks. RockShox Model A RockShox Boxxer World Cup 2010-2016. Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model A RockShox Pike 2015-2016 15x110 (Boost). Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike 2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Lyrik 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Yari 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike Short Travel 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model C RockShox Pike Short Travel 2015-2016 15x110 (Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Pike Short Travel 2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Lyrik Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Yari Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Reba 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Revelation 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Sid 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Bluto 2014-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 140mm+ 29", 27.5+, and 27.5" forks. Fox Model A Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 110-130mm+ 29", 27.5+, and 27.5" forks. Fox Model B Fox 32 2016 with FIT4/Grip Dampers 80-130mm 26"/27.5"/29". Not recommended for 80-90mm forks. NOT COMPATIBLE WITH 140-150mm FORKS. NOT COMPATIBLE WITH FOX 32 STEP CAST FORKS. Fox Model C Fox 36 2015-2017 with Float air spring. Compatible w/ 2015-Current 26/27.5/29 Fox 36 forks in all travels w/ Float Air Spring. NOT COMPATIBLE WITH TALAS AIR SPRING. Fox Model D Buy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ramp Control Suspension Fork CartridgeProduced to fit a range of RockShox & Fox forks (see compatibility table below), this MRP Ramp Control Cartridge is a quick and easy way to upgrade your forks. The Ramp Control Cartridge has been manufactured to thread into the air spring of your forks for total personalisation of fork progression without the need to tinker with Bottomless Tokens or spacers.Customise Your ForkOptimising your fork is so quick and simple with this Ramp Control Cartridge as adjustments are made with the turn of a dial. Tweak your volume control 'on the fly' and tackle immediate terrain with optimal volume adjustments. The Ramp Control Cartridge allows tuning of the fork through air pressure and damper settings, resulting in the isolation of big hits and the dreaded bottom-out.The Ramp Control Cartridge means no more time-consuming tinkering with internally accessed volume spacers, simply turn the cartridge dial to control you volume adjustments.Features:Custom tune to suit any terrainOptimal performanceWeight: 55gCompatibility Chart Compatible Forks MRP Ramp Control Cartridge Model RockShox Pike 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended for 140mm+ 29" and 130mm+ 26"/27.5" - See Model C for short travel Pike Non-Boost forks. RockShox Model A RockShox Boxxer World Cup 2010-2016. Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model A RockShox Pike 2015-2016 15x110 (Boost). Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike 2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Lyrik 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Yari 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike Short Travel 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model C RockShox Pike Short Travel 2015-2016 15x110 (Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Pike Short Travel 2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Lyrik Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Yari Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Reba 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Revelation 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Sid 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Bluto 2014-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 140mm+ 29", 27.5+, and 27.5" forks. Fox Model A Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 110-130mm+ 29", 27.5+, and 27.5" forks. Fox Model B Fox 32 2016 with FIT4/Grip Dampers 80-130mm 26"/27.5"/29". Not recommended for 80-90mm forks. NOT COMPATIBLE WITH 140-150mm FORKS. NOT COMPATIBLE WITH FOX 32 STEP CAST FORKS. Fox Model C Fox 36 2015-2017 with Float air spring. Compatible w/ 2015-Current 26/27.5/29 Fox 36 forks in all travels w/ Float Air Spring. NOT COMPATIBLE WITH TALAS AIR SPRING. Fox Model D Buy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
MRP Ramp Control Suspension Fork CartridgeProduced to fit a range of RockShox & Fox forks (see compatibility table below), this MRP Ramp Control Cartridge is a quick and easy way to upgrade your forks. The Ramp Control Cartridge has been manufactured to thread into the air spring of your forks for total personalisation of fork progression without the need to tinker with Bottomless Tokens or spacers.Customise Your ForkOptimising your fork is so quick and simple with this Ramp Control Cartridge as adjustments are made with the turn of a dial. Tweak your volume control 'on the fly' and tackle immediate terrain with optimal volume adjustments. The Ramp Control Cartridge allows tuning of the fork through air pressure and damper settings, resulting in the isolation of big hits and the dreaded bottom-out.The Ramp Control Cartridge means no more time-consuming tinkering with internally accessed volume spacers, simply turn the cartridge dial to control you volume adjustments.Features:Custom tune to suit any terrainOptimal performanceWeight: 55gCompatibility Chart Compatible Forks MRP Ramp Control Cartridge Model RockShox Pike 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended for 140mm+ 29" and 130mm+ 26"/27.5" - See Model C for short travel Pike Non-Boost forks. RockShox Model A RockShox Boxxer World Cup 2010-2016. Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model A RockShox Pike 2015-2016 15x110 (Boost). Solo Air models only. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike 2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Lyrik 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Yari 2015-2017. All Solo Air models. recommended for 140mm+ 29"/27.5+ and 130mm+ for 26"/27.5" - See Model D for short travel options. RockShox Model B RockShox Pike Short Travel 2013-2016 15x100 (Non-Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model C RockShox Pike Short Travel 2015-2016 15x110 (Boost). Solo Air models only. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Pike Short Travel 2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Lyrik Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Yari Short Travel 2015-2017. All Solo Air models. Recommended 120mm 27.5" 120mm/130mm 29". RockShox Model D RockShox Reba 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Revelation 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Sid 2013-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E RockShox Bluto 2014-2017. Solo Air models only. Recommended for 100mm-140mm 29", 27.5+, 27.5", 26", and fat forks. RockShox Model E Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 140mm+ 29", 27.5+, and 27.5" forks. Fox Model A Fox 34 Float 2016-2017 with FIT4 and GRIP dampers. Recommended for 110-130mm+ 29", 27.5+, and 27.5" forks. Fox Model B Fox 32 2016 with FIT4/Grip Dampers 80-130mm 26"/27.5"/29". Not recommended for 80-90mm forks. NOT COMPATIBLE WITH 140-150mm FORKS. NOT COMPATIBLE WITH FOX 32 STEP CAST FORKS. Fox Model C Fox 36 2015-2017 with Float air spring. Compatible w/ 2015-Current 26/27.5/29 Fox 36 forks in all travels w/ Float Air Spring. NOT COMPATIBLE WITH TALAS AIR SPRING. Fox Model D Buy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.