Give your tools the home they deserve with the X-Tools Pro Stainless-Steel Hard Case. Small enough to take to a race but big enough to stash your essentials, the X-Tools Pro Stainless-Steel Hard Case enhances any budding mechanics workshop. The tool case is made from a toughened plastic and has a sheet brushed stainless steel outer. Inside the case has a tool tray allowing you to keep your essentials easily accessible.
LifeLine’s Bluetooth and ANT+ Compatible Heart Rate Monitor can easily be connected to a large range of devices and used with smartphone apps, watches, consoles, and other compatible receivers. The transmitter pod is incredibly lightweight and is integrated within a soft fabric body belt delivering maximum performance and comfort when worn around the chest. The belt can be adjusted to provide a large range of sizes and fit. Tech Specs Heart rate range: 30~230bpm Typical range: 30ft Storage temperature: -10 ~ 60°C Operating temperature: 0 ~ 50°C Average active current: typical 95uA at transmission intervals of 1s Flexible connection interval controlled by Host device (Min:0.3125sec, Max:2sec, default:1sec) Peak Active current: 10.5mA at Tx 0dBm Stand-by current: less than 2uA Battery level display: 100%, 80%, 60%, 40%, 20%, 0% Battery: CR2032 lithium cell (200mAh) Battery life: up to 900hrs use RF system: 2.4Ghz
With a measuring range of 0-150mm/0-6", the Digital Vernier Callipers are suited for use on a wide range of fixtures and fittings found all across your bicycle. Finding readings in both imperial and metric measurements and built from durable stainless steel this is a tool that is designed for a long-life of usage. The large LCD display not only shows your super-accurate measurements but stops the misjudgement and inaccuracy of trying to find the exact scale lines by eye when it gets to the smallest of scale spaces. A handy tool for any workshop or tool bag, the Digital Vernier Callipers from LifeLine more than measures up to its rivals.
The LifeLine Cone Spanner Set comes dispalyed in a heavy duty roll mat that can be mounted on a shadow board or rolled away into a mobile kit making this an essential item for any home or professional mechanic.
LifeLine Narrow Road Clip-On MudguardLifeLine's Narrow Road Clip-On Mudguard is a flexible and lightweight clip-on mudguard made from PET/aluminium. It is quick and very simple to install and all the mounting hardware is included. This mudguard is UV and corrosion resistant and is compatible with all calliper and disc brakes.Features:Material: PET/AluminiumLightweightFlexibleUV and corrosion resistantQuick and easy to installAll mounting hardware includedCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Lightweight Carbon Bike Bottle CageThis Carbon Water Bottle Cage from LifeLine is made entirely of carbon with a small rubber gripper that ensures the bottle remains in place. It is extremely lightweight, weighing only 18g and its shape allows you to access the bottle from either side.Features:Carbon bottle cage, 3k weave on the inside and UD on the outsideShape allows easy access from either sideSmall rubber gripperWeight: 18gBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Ratchet StashThe LifeLine Pro Ratchet Stash provides a superb solution to conveniently carrying tools on your commute to work, when touring through the countryside, exploring at the weekends, or when spending long days in the mountains during trail rides. The Pro Ratchet Stash comes with a bracket that can be mounted to a bottle cage for hassle-free, low-profile storage.Features: Ratchet tool Six tools bits included Storage canister mountable to bottle cage Hex: 4, 5, 6mm Torx Bits: T25, T30 Screwdriver Head: Phillips #2 Buy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Narrow Road Clip-On MudguardLifeLine's Narrow Road Clip-On Mudguard is a flexible and lightweight clip-on mudguard made from PET/aluminium. It is quick and very simple to install and all the mounting hardware is included. This mudguard is UV and corrosion resistant and is compatible with all calliper and disc brakes.Features:Material: PET/AluminiumLightweightFlexibleUV and corrosion resistantQuick and easy to installAll mounting hardware includedCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The LifeLine Essential Mini Torque Wrench allows you to apply a calibrated tension of 5Nm to your component clamps; a common recommendation amount stem, seatpost and groupset manufacturers. This helps prevent excessive clamping which can damage both components and tools.
The LifeLine Metal Bike Display Stand is very easy to use. It holds your bike between the frame and wheel on the axle, on the non-drive side with the wheel sitting in the base's groove. With ease of use and its compact nature the LifeLine Metal Bike Display Stand will proudly show your bike and tuck away when it's not in use.
LifeLine Pro Stainless Steel Hard CaseThe Pro Toolbox is the perfect storage solution for stashing your tools in style and giving them the home they deserve. Small enough to take with you to a race but also large enough to hold all your essentials, this hard case is ideal for budding mechanics who are regularly on the move. Its inner casing is made from hard plastic that's highly durable alongside its outer sheet brushed stainless steel construction which protects against any knocks and bumps when being transported.Features: Material: Inner: Plastic; Outer: Stainless Steel Dimensions: 46x19.5x20.5cm Weight: 1.87kgBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Removal Tool (12.46 DUB)The Pro BB Removal Tool 12.46 DUB from LifeLine provides a firm and reliable grip on specific threaded bottom bracket cups for efficient maintenance. It's compatible with SRAM DUB, Race Face Cinch, Hawk Racing BB3086 and others.Features:Full CNCAnodised24mm Hex end spanner AND 1/2'' drive wrench12 notch 46mm OD cup Compatible With: SRAM DUB Race Face Cinch Rotor BSA30 Zipp Vuma Hawk Racing BB3086Buy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Brake Hose KitThis brake hose kit is a replacement kit for road and mountain bike (MTB) hydraulic disc brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn.There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit:Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper OliveSpec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper OliveSpec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded OlivesSpec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper OlivesFeatures: Type: Replacement Brake Hose Kit for hydraulic brakes All hoses are constructed from a high tenacity braided yarnBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Removal Tool (16.41 BBR60)The Pro BB Removal Tool 16.41 BBR60 from LifeLine provides a firm and reliable grip on specific threaded bottom bracket cups for efficient maintenance. It's compatible with Shimano BBR60 (Ultegra 11 speed 6800 series) and Shimano MT-800.Features:Full CNCAnodised24mm Hex end spanner AND 1/2'' drive wrench16 notch 41mm OD cup Compatible With: Shimano BBR60 (Ultegra 11 speed 6800 series) Shimano MT-800Buy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The LifeLine Pro Ratchet Stash comes with a T-Bar Ratchet Tool and six tool bits (4/5/6mm Hex; T25/T30 torx bit; PH2 screwdriver head) that will help you tighten loose bolts and screws on your ride.
LifeLine Metal Bike Display StandLifeLine Metal Bike Display Stand LifeLine Bike Display Stand is designed to simply hold your bike upright for storage, display or for maintenance purposes. Features: Easy to use - Holds your bike by the rear wheel axle between the frame and the rear wheel on the non drive side. Rubber coated fingers prevent any scratches Wide base for stability Durable steel construction Buy LifeLine from Chain Reaction Cycles, the World's Largest Online Bike Store.
See the compatability chart in the images for specific brake caliper and lever fitment. The kit includes 8 nipple adaptors. Each nipple adaptor is specific to the brake caliper and lever and so please refer to the chart to check the required fitment. Compatatiblity has been checked and confirmed with the following brakes: Avid Code/ XO SRAM Guide Series/ Level Shimano Formula R1, C1,TheOne Hope X2/ E4 & V4 Magura MT Series (2,4,5,6,7,8)/ Louise Hayes El Camino/ Stroker Ryde/ Sole At the moment the kit is not compatible with TRP Quadium, TRP Slate, Formula Cura and Hayes Dominion A2/ A4. Please note: For the newer models of SRAM brakes with a Bleeding Edge port you will also require the LifeLine SRAM Bleeding Edge Brake Bleed Adaptor
LifeLine Metal Bike Display StandLifeLine Metal Bike Display Stand LifeLine Bike Display Stand is designed to simply hold your bike upright for storage, display or for maintenance purposes. Features: Easy to use - Holds your bike by the rear wheel axle between the frame and the rear wheel on the non drive side. Rubber coated fingers prevent any scratches Wide base for stability Durable steel construction Buy LifeLine from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a maximum pressure of 160psi, its sturdy steel base improves stability while its steel barrel allows you to pump efficiently. Ideal for use at home or keeping in the boot of your car, it also includes a large and easy to read top-mounted pressure gauge.
The Lifeline brake hose kits are replacement kits for hydraulic brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn. There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit: Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper Olive Spec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper Olive Spec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded Olives Spec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded Olives Spec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper Olives