Vintage teardrop style canvas bag from Kink with leather accents, adjustable shoulder strap, top carry handle, and padded compartment for laptop. Dimensions: 5.5" x 13" x 17".
Kink Desist brakes are fully forged from 7075-T6 aluminum for ultimate stiffness. The unique cable pivots and straddle cable system create a smoother and more powerful pull. A low stack spring and cap design also provide extra clearance for drivetrains. This brake set also includes the legendary Kool-Stop brake pads for plenty of stopping power. Weight: 161g / 5.7oz.
100% cotton hoodie from Kink with 1_1 ribbing at cuffs, waistband & pocket openings and nickel eyelets.
100% cotton hoodie from Kink with 1_1 ribbing at cuffs, waistband & pocket openings and nickel eyelets.
9 oz 50/50 cotton/polyester hoodie from Kink printed on Champion gear. Made with up to 5% recycled polyester from plastic bottles. "C" logo on left sleeve.
The Rex bars are perfect if you are looking for a big pair of bars, but not enormous. Like all Kink handlebars, the Rex bars use only the best 4130 chromoly steel material and Kink's TruTherm post weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends, which adds strength where bars need it most. ###section### Product Specs Rise: 9.5" Width: 29.5" Up Sweep: 1° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 29.0oz ###section### ###shogun-image-section###
As the name suggests, the Williams bars are Nathan Williams' signature handlebars and feature all his preferred geometry. The 9.25" rise is a traditional height, without being either too tall or too short. The unique 1.5-degree upsweep is just slightly up from most traditional bars, and the 11-degree backsweep is slightly less, creating Nathan's preferred feel. The 13-butted chromoly tubing construction, and TruTherm post weld heat treatment process ensure these bars have no problems standing up to Nathan's insane level of riding. ###section### Product Specs Rise: 9.25" Width: 29" Up Sweep: 1.5° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 27.8oz ###section### ###shogun-image-section###
Dan Coller's signature Contender bars are perfect for taller riders, coming in at a comfortable 9.75" rise. The Contender bars are the first set of bars from Kink to offer pre-defined cutting grooves at 0.25" intervals. Coming with a stock 29.5" width, they can easily be cut down to 29", 28.5", 28" or 27.5" without breaking out the tape measure. Made from 13-butted chromoly tubing, and our TruTherm post weld heat treatment process, ensures these bars can stand up to all kinds of riding. Being ridden and trusted by Dan Coller daily, can attest to the Contender bars strength. ###section### Product Specs Rise: 9.75" Width: 29.5" Up Sweep: 28.7 oz.J9 Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 28.6oz ###section### ###shogun-image-section###
The Hulk bars are made TruTherm post weld heat treated 4130 chromoly and feature multi butted tubing for maximum weight to strength ratio. Rise: 10". ###section### Product Specs Rise: 10" Width: 30" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 825g / 1.82lbs ###section### ###shogun-image-section###
The Eagle bars are Kink's first ever set of 4-piece bars! Available in multiple heights to fit your preference, all Eagle bars maintain the same width and comfortable sweeps. Made from straight gauge 4130 chromoly steel tubing, combine with our TruTherm post weld heat treatment process, these bars can take a beating. The dimensions and bends used on the Eagle bars give the classic 4-piece design a modern and updated look. Rise: 9" and 9.5". ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: 1091g / 2.4lbs ###section### ###shogun-image-section###
100% nylon 330D jacket from Kink with Interior PU waterproof coating, adjustable 3 panel hood with fine mesh lining, scuba neck with 1/2 length zip, hidden zipper front pocket with snaps inside front pocket flap, side slit pockets, elastic cuffs, and tightening toggle at waistband.
100% nylon 330D jacket from Kink with Interior PU waterproof coating, adjustable 3 panel hood with fine mesh lining, scuba neck with 1/2 length zip, hidden zipper front pocket with snaps inside front pocket flap, side slit pockets, elastic cuffs, and tightening toggle at waistband.
100% nylon 330D jacket from Kink with Interior PU waterproof coating, adjustable 3 panel hood with fine mesh lining, scuba neck with 1/2 length zip, hidden zipper front pocket with snaps inside front pocket flap, side slit pockets, elastic cuffs, and tightening toggle at waistband.
100% nylon jacket from Kink with Interior PU waterproof coating, adjustable 3 panel hood with fine mesh lining, scuba neck with 1/2 length zip, hidden zipper front pocket with snaps inside front pocket flap, side slit pockets, elastic cuffs, and tightening toggle at waistband.
100% nylon jacket from Kink with Interior PU waterproof coating, adjustable 3 panel hood with fine mesh lining, scuba neck with 1/2 length zip, hidden zipper front pocket with snaps inside front pocket flap, side slit pockets, elastic cuffs, and tightening toggle at waistband.
Kink's CST Forks are not your average Forks. The CST being short for CAST as these feature invest casting for increased strength without additional weight. The dropouts on the CST are invest cast allowing for a design which greatly increases strength without adding extra bulk or weight, it's about adding the material where you need it. In addition to the dropouts the forks feature tapered and internally butted fork legs, a one piece fully CNC machined steerer tube, fork blade ends relieved for peg clearance and flush inner fork legs for great hub guard clearance. A custom formed fork leg profile also improves fork leg and steerer tube junction strength by adding increased welding surface. ###section### Product Specs Steerer Length: 165mm Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 28mm Weight: 961g / 2.11lbs
The Kink Foundation 2 forks are a traditional style fork that still use the latest technology. Available in 2 different offset sizes to suit all types of riding. Features Investment cast ends, CNC & Laser cut dropouts and one piece CNC steer tube with integrated race ###section### Product Specs Steerer Length: 165mm Wheel Size: 20" Material: Chromoly Dropout Size: 10mm Offset: 26 & 32mm Options Weight: 986g / 34.8oz
The Kink Brace cranks are a traditional 3 piece design that are highly reliable with convenient modern features. Left and right side sprocket bosses make these cranks compatible with left and right side drive, and the 22mm hollow 48 spline spindle is super strong and fits all modern sprockets. The custom spindle bolts feature both 3/8” ratchet and 6mm allen key broaches, so installation is super easy with whatever tools you have around. Oval tapered tubing gives the cranks a sleek look and a stiff feel, and the large radiuses on the spindle bosses make these cranks more ankle friendly. Fully wrapped spindle and pedal bosses paired with precision welds, make the Kink Brace cranks a pair that will last. ###section### Product Specs Type: 3 Piece Spindle Diameter: 22mm Includes BB Bearings: No Weight: 33.5oz (175mm) ###shogun-image-section###
The Kink Vogue forks check all the boxes; strength, feel, and aesthetics. The fork legs feature a custom oval tube profile, welded up to a fully CNC’d steerer tube with internal butting to add strength where it’s needed. The investment cast dropouts are one single piece making them super strong and feature interior knurling to keep your wheel and plastic hub guards in place. The 25mm offset gives a responsive feel, without being too short or too raked out. Kink Vogue forks also feature steerer tube cut lines for those riders wanting to trim down ###section### Product Specs Steerer Length: 165mm Wheel Size: 20" Material: Chromoly Dropout Size: 3/8' Offset: 25mm Weight: 33.9oz (Including Fork Bolt)