Innertube for 20 BMX Wheels. Schrader (car type) valve. 20 Tube to fit a 1.75 - 2.125 tyre.
Designed with racer in mind, Kenda Standard Inner Tubes are made from high quality Butyl Rubber and have a wall thickness of 1mm. This model features a presta valve.
Shrader valve race inner tube from Kenda made from high quality Butyl rubber with a 1mm thick wall.
An upgrade on Kenda's terrific trail and enduro-riding Nevegal tyre, this improved model comes equipped with ATC (Advanced Trail Casing) and makes fantastic use of its proprietary K-Armor material prevent punctures and slashes from spoiling and slowing your escapades. With a dual tread compound and a tubeless-ready design and grippy and controlled performance is assured as you take on the most demanding downhill runs and terrains. Protective and Grippy MTB Tyre Low in weight, the Nevegal 2 improves the overall handling of your wheel, while the well-spaced tread pattern along the centre reduces rolling resistance by 50%, compared to its older sibling. The outer edges feature taller knobs form enhanced braking traction, ensuring a controlled and confident ride, however hard you push it. Technologies: ATC: Optimized for aggressive cross country or trail riding, the Advanced Trail Casing (ATC) is lighter and more supple than either of Kenda's gravity solutions. Using sheets of Kenda's SCT fabric across the tire sidewalls and a sub-tread belt of K-Armor under the tread blocks. The K-Armor fabric has a tighter weave, resulting in the use of less rubber during the construction process, yielding a lighter tire and a casing that is supple enough to allow the knobs to flex and form under load, yet still protects from pinch flats, punctures and cuts.
Optimised for top performance across a range of under-wheel conditions, this fantastic folding tyre uses its professional UR team pedigree to take you speedily and steadily across the mountain. Available in a selection of technologically advanced casings, it does all it can to keep you puncture-free, however rowdy your ride becomes. Versatile, Dual Compound, Grippy MTB Tyre Constructed using a dual layer compound, the Hellkat Pro provides unrivalled grip and composure, putting its tubeless-ready design to work as you speed through corners and weave your way to the podium. The centreline of the tyre features alternating rows of siped knobs for impressively low rolling resistance, while the outer edges utilise taller blocks to improve braking traction. All of these features result in a hard-wearing hero of an MTB tyre. Technologies (See Sizing Option Above For Corresponding Compound Type): EN-DTC Compound Option: Designed around the rigours of enduro racing. Featuring a lower rolling resistance value than previous dual tread compounds, tyres with EN-DTC show less wear than other similar tyres. With shore A values lower than the original DTC, the EN-DTC provides a more responsive ride, letting the knobs do the work of control and braking on the ground. RSR DUAL LAYER (RSRDL) Compound Option: Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions. AGC Compound: The Advanced Gravity Casing (AGC) is Kenda‘s latest innovation for gravity orientated riders. Utilizing strips of Kenda Vector Shield (KVS), a lightweight woven aramid material, positioned under the tread area and along the sidewalls to protect the tyre from cuts and punctures. The KVS material offers nearly three times more cut resistance than standard protective materials. A 20mm apex along the bead prevents pinch flats and burping. Our lightest and strongest gravity casing up to date. AEC Compound Casing (on all compound tyres): Developed for the rigours of enduro, the new Advanced Enduro Casing (AEC) fills the gap between the burly Advanced Gravity Casing (AGC) and the weight-optimized Advanced Trail Casing (ATC). Using the same 3-piece Aramid inserts as the AGC casing, AEC omits the apex at the bead: for the same high level of puncture and cut resistance but without the added weight. A dual-layer compound provides the same reliable grip found on the AGC casing.
Kitted out with an ultra-protective ATC (Advanced Trail Casing), it uses K-Armor material to stop slashes and rips from bringing your ride to a halt. Made from a dual-layer compound, this tough and grippy tyre saves weight and assists with cornering control, keeping you upright and unrivalled over unpredictable terrains Dual Compound, Fast-Rolling MTB Tyre Fit for the most daring off-road adventures, this take on the Nevegal generates impressively low rolling resistance thanks to the siped, square knobs which make up the centreline. The outer edges put their taller, angled blocks to great use to improve braking traction in any conditions, making this Kenda tyre an essential pick for the modern MTBer. Technologies: ATC: Optimized for aggressive cross country or trail riding, the Advanced Trail Casing (ATC) is lighter and more supple than either of Kenda's gravity solutions. Using sheets of Kenda's SCT fabric across the tire sidewalls and a sub-tread belt of K-Armor under the tread blocks. The K-Armor fabric has a tighter weave, resulting in the use of less rubber during the construction process, yielding a lighter tire and a casing that is supple enough to allow the knobs to flex and form under load, yet still protects from pinch flats, punctures and cuts.
Built with a dual layer compound, the hard-wearing Helldiver puts its selection of technologically advanced casings to the test as you dive down every hill with aggression and confidence. Doing all it can to prevent punctures, the tyre also comes tubeless-ready for improved cornering grip and control on rough and tumble routes. Lightweight and Hard-Wearing MTB Tyre The centreline of this impressively lightweight tyre has a low-profile tread pattern, developed alongside Polygon-UR Team professionals, to keep you rolling with minimal resistance. Giving an outstanding showing on dry and dusty hardpack tracks, it also uses its tall and durable side knobs to give unrivalled braking traction as you weave your way to glory. Technologies: EN-DTC: Designed around the rigours of enduro racing. Featuring a lower rolling resistance value than previous dual tread compounds, tyres with EN-DTC show less wear than other similar tyres. With shore A values lower than the original DTC, the EN-DTC provides a more responsive ride, letting the knobs do the work of control and braking on the ground. AEC: Developed for the rigours of enduro, the new Advanced Enduro Casing (AEC) fills the gap between the burly Advanced Gravity Casing (AGC) and the weight-optimized Advanced Trail Casing (ATC). Using the same 3-piece Aramid inserts as the AGC casing, AEC omits the apex at the bead: for the same high level of puncture and cut resistance but without the added weight. A dual-layer compound provides the same reliable grip found on the AGC casing. RSR DUAL LAYER (RSRDL): Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions.
Keeping you in full control of the ride, this MTB tyre is Kenda's dry condition gravity tyre. It was exclusively developed with pro downhill mountain bike rider Aaron Gwin and used on World Cup tracks like Leogang and Lenzerheide. This ensures that is more than capable of holding its own against the toughest of competitions and off-road adventures. Kenda has made this versatile MTB tyre available in AGC or ATC casing options, so riders can choose a tyre that perfectly matches their riding style. The Pinner shines with excellent cornering predictability and particularly high puncture protection. This makes it an excellent choice for gravity racers and trail riders alike. - Excellent Predictability: A consistent contact patch when the bike is leaned over creates a super predictable feel - no sudden wash-outs - Optimised for Hard Pack: The tread pattern is done to work best on hardpack, rocky or rooty and loose over hard conditions. - AGC or ATC Casing Options: Choose the AGC casing for gravity riding, or ATC for a lighter trail tyre - Tubeless ready - Topo Design: Unique and stand-out topographic design pattern over the sidewalls and tread Technologies: AGC (AGC): THE MOST ADVANCED GRAVITY SOLUTION The Advanced Gravity Casing (AGC) is Kenda‘s latest innovation for gravity orientated riders. Utilizing strips of Kenda Vector Shield (KVS), a lightweight woven aramid material, positioned under the tread area and along the sidewalls to protect the tire from cuts and punctures. The KVS material offers nearly three times more cut resistance than standard protective materials. A 20 mm apex along the bead prevents pinch flats and burping. Our lightest and strongest gravity casing up to date. ATC (ATC): THE LIGHTER WAY Tire construction optimized for aggressive cross country or trail riding, the Advanced Trail Casing (ATC) is lighter and more supple than either of Kenda's gravity solutions. Using sheets of Kenda's SCT fabric across the tire sidewalls and a sub-tread belt of K-Armor under the tread blocks. The K-Armor fabric has a tighter weave, resulting in the use of less rubber during the construction process, yielding a lighter tire and a casing that is supple enough to allow the knobs to flex and form under load, yet still protects from pinch flats, punctures and cuts. DUAL LAYER COMPOUND: Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions. DUAL TREAD COMPOUND: Dual Tread Compound (DTC) is a combination of two different rubber compounds: L3R Pro (center knobs) and Stick-E rubber (corner knobs). DTC rubber is most commonly found on cross country, all-mountain, and cyclocross tires due to its rolling speed and grip.
Our tyres are engineered for performance and value across a wide range of interests and applications.
Kenda Kwick Journey Wire City TyreLiving up to its name, this quality-made Kenda tyre delivers a nippy and nimble performance on every urban journey and country trek. Made from an SRC compound for a supple and supportive showing, this Kwick Journey model utilises a K-Shield puncture protection belt to thwart rips and tears. Certified for use with E-Bikes, this all-weather tyre features deep-siping for water channelling and knurled shoulder lugs for impressive cornering grip.Features: Bead: Wire Compound: SRC Protection: K-Shield+ Recommended Inflation Pressure: 55 EPI: 60Technologies:K-Shield Plus (KS+): Kenda has increased the thickness of the K-Shield to 5 mm to create the best balance of flat proof and maintaining great ride quality. For anyone looking to go that extra mile.Buy Kenda Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kenda Nevegal Pro DTC MTB Folding TyreA dual-compound tyre for the daring enduro and trail rider, this Pro take on Kenda's Nevegal model gives superior performance as you dive down and climb back up the mountain. Equipped with super-protective ATC (Advanced Trail Casing) and K-Armor material, this terrific tyre works hard to prevent slashes and punctures from slowing your roll.Dual Compound, Fast-Rolling MTB Tyre Robustly-designed to take on any challenge your off-road adventures throw at you, this Nevegal model gives impressively low rolling resistance from its well-spaced centreline of siped, square knobs. Taller, angled blocks on the outer sides of the tyre enhance braking grip on any surface, to give a controlled and responsive showing when tackling trickier terrains. Features: Compound: Dual Tread Rubber Use: Trail, Enduro Material: K-Armor Technology: EN-DTC Protection: ATC (Advanced Trail Casing) Type: Clincher Bead: Folding TPI: 120 Tubeless Ready: NoTechnologies: ATC: Optimised for aggressive cross country or trail riding, the Advanced Trail Casing (ATC) is lighter and more supple than either of Kenda's gravity solutions. Using sheets of Kenda's SCT fabric across the tire sidewalls and a sub-tread belt of K-Armor under the tread blocks. The K-Armor fabric has a tighter weave, resulting in the use of less rubber during the construction process, yielding a lighter tire and a casing that is supple enough to allow the knobs to flex and form under load, yet still protects from pinch flats, punctures and cuts.Buy Kenda Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kenda Hellkat Pro Folding Mountain Bike TyreDeveloped alongside the professional riders of the UR Team, this Hellkat tyre by Kenda is a top choice for gravity and enduro riders alike. Specially-designed for taking on a variety of under-wheel conditions, it provides a top rolling performance as you twist and turn your way down the mountain. Available in a range of technologically advanced casings, this fantastic folding tyre stands up to any challenge your chosen route throws at you. Versatile, Dual Compound, Grippy MTB Tyre Made from a dual-layer compound, the Hellkat Pro gives unbeatable grip and composure across the toughest terrains, with its tubeless-ready design enhancing the hold as you take corners with pace and power. The alternating rows of knobs along the centreline work hard to reduce rolling resistance, while the taller blocks on the outer edge improve braking performance, even in the wettest conditions. This quality-made Kenda tyre is a must-have for any enduro maverick. Features: Compound: dual-layer Compound Use: Gravity, Enduro Bead: Folding TPI: 60, 120 Tubeless-Ready: YesTechnologies: EN-DTC: Designed around the rigours of enduro racing. Featuring a lower rolling resistance value than previous dual tread compounds, tyres with EN-DTC show less wear than other similar tyres. With shore A values lower than the original DTC, the EN-DTC provides a more responsive ride, letting the knobs do the work of control and braking on the ground. AGC: The Advanced Gravity Casing (AGC) is Kenda's latest innovation for gravity orientated riders. Utilizing strips of Kenda Vector Shield (KVS), a lightweight woven aramid material, positioned under the tread area and along the sidewalls to protect the tyre from cuts and punctures. The KVS material offers nearly three times more cut resistance than standard protective materials. A 20mm apex along the bead prevents pinch flats and burping. Our lightest and strongest gravity casing up to date. AEC: Developed for the rigours of enduro, the new Advanced Enduro Casing (AEC) fills the gap between the burly Advanced Gravity Casing (AGC) and the weight-optimised Advanced Trail Casing (ATC). Using the same 3-piece Aramid inserts as the AGC casing, AEC omits the apex at the bead: for the same high level of puncture and cut resistance but without the added weight. A dual-layer compound provides the same reliable grip found on the AGC casing. RSR dual-layer (RSRDL): Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual-layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual-layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions.Buy Kenda Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kenda Helldiver Pro Folding Mountain Bike TyreA dynamic and durable tyre for the daring downhill and enduro rider, this fast-rolling Kenda model is the ideal choice for rapid descents down rough and ready routes. Made using a dual-layer compound, the Helldiver uses a choice of technologically advanced casings to ensure you make it to the bottom with uninhibited power and pace. Tubeless-ready, it gives a grippy and composed performance through the most demanding trails and tracks. Lightweight and Hard-Wearing MTB Tyre Rolling you to glory with minimal resistance, this Pro model features a low-profile centre tread pattern, developed alongside Polygon-UR Team pros, to send you down the mountain with speed and control. An ideal choice for dry and dusty hardpack routes, this lightweight and reliable tyre gives superb braking traction to keep you composed and in control of every hard-riding descent. Features: Compound: dual-layer Compound Use: Gravity, Enduro, Downhill Bead: Folding TPI: 60, 120 Tubeless-Ready: YesTechnologies: EN-DTC: Designed around the rigours of enduro racing. Featuring a lower rolling resistance value than previous dual tread compounds, tyres with EN-DTC show less wear than other similar tyres. With shore A values lower than the original DTC, the EN-DTC provides a more responsive ride, letting the knobs do the work of control and braking on the ground. AEC: Developed for the rigours of enduro, the new Advanced Enduro Casing (AEC) fills the gap between the burly Advanced Gravity Casing (AGC) and the weight-optimised Advanced Trail Casing (ATC). Using the same 3-piece Aramid inserts as the AGC casing, AEC omits the apex at the bead: for the same high level of puncture and cut resistance but without the added weight. A dual-layer compound provides the same reliable grip found on the AGC casing. RSR dual-layer (RSRDL): Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual-layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual-layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions.Buy Kenda Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kenda Helldiver Pro Folding Mountain Bike TyreA dynamic and durable tyre for the daring downhill and enduro rider, this fast-rolling Kenda model is the ideal choice for rapid descents down rough and ready routes. Made using a dual-layer compound, the Helldiver uses a choice of technologically advanced casings to ensure you make it to the bottom with uninhibited power and pace. Tubeless-ready, it gives a grippy and composed performance through the most demanding trails and tracks. Lightweight and Hard-Wearing MTB Tyre Rolling you to glory with minimal resistance, this Pro model features a low-profile centre tread pattern, developed alongside Polygon-UR Team pros, to send you down the mountain with speed and control. An ideal choice for dry and dusty hardpack routes, this lightweight and reliable tyre gives superb braking traction to keep you composed and in control of every hard-riding descent. Features: Compound: dual-layer Compound Use: Gravity, Enduro, Downhill Bead: Folding TPI: 60, 120 Tubeless-Ready: YesTechnologies: EN-DTC: Designed around the rigours of enduro racing. Featuring a lower rolling resistance value than previous dual tread compounds, tyres with EN-DTC show less wear than other similar tyres. With shore A values lower than the original DTC, the EN-DTC provides a more responsive ride, letting the knobs do the work of control and braking on the ground. AEC: Developed for the rigours of enduro, the new Advanced Enduro Casing (AEC) fills the gap between the burly Advanced Gravity Casing (AGC) and the weight-optimised Advanced Trail Casing (ATC). Using the same 3-piece Aramid inserts as the AGC casing, AEC omits the apex at the bead: for the same high level of puncture and cut resistance but without the added weight. A dual-layer compound provides the same reliable grip found on the AGC casing. RSR dual-layer (RSRDL): Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual-layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual-layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions.Buy Kenda Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kenda Helldiver Pro Folding Mountain Bike TyreA dynamic and durable tyre for the daring downhill and enduro rider, this fast-rolling Kenda model is the ideal choice for rapid descents down rough and ready routes. Made using a dual-layer compound, the Helldiver uses a choice of technologically advanced casings to ensure you make it to the bottom with uninhibited power and pace. Tubeless-ready, it gives a grippy and composed performance through the most demanding trails and tracks. Lightweight and Hard-Wearing MTB Tyre Rolling you to glory with minimal resistance, this Pro model features a low-profile centre tread pattern, developed alongside Polygon-UR Team pros, to send you down the mountain with speed and control. An ideal choice for dry and dusty hardpack routes, this lightweight and reliable tyre gives superb braking traction to keep you composed and in control of every hard-riding descent. Features: Compound: dual-layer Compound Use: Gravity, Enduro, Downhill Bead: Folding TPI: 60, 120 Tubeless-Ready: YesTechnologies: EN-DTC: Designed around the rigours of enduro racing. Featuring a lower rolling resistance value than previous dual tread compounds, tyres with EN-DTC show less wear than other similar tyres. With shore A values lower than the original DTC, the EN-DTC provides a more responsive ride, letting the knobs do the work of control and braking on the ground. AEC: Developed for the rigours of enduro, the new Advanced Enduro Casing (AEC) fills the gap between the burly Advanced Gravity Casing (AGC) and the weight-optimised Advanced Trail Casing (ATC). Using the same 3-piece Aramid inserts as the AGC casing, AEC omits the apex at the bead: for the same high level of puncture and cut resistance but without the added weight. A dual-layer compound provides the same reliable grip found on the AGC casing. RSR dual-layer (RSRDL): Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual-layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual-layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions.Buy Kenda Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.