Kask Utopia Team IneosFeaturing the perfect fit that adapts to and protects your head perfectly and incredible aerodynamic performance, the Utopia Team Ineos from Kask is like heaven on Earth for your tarmac ripping rides - no wonder it's a Team Ineos favourite for the fastest bunch riding days.To make the finest aerodynamic helmet possible, Kask made extensive use of computational fluid dynamics (CFD) simulation and wind tunnel testing, looking at competitor helmets to ensure the Utopia was the best possible helmet for fast rides. The result was the drag data of Utopia versus the best competitor helmet resulted in a saving of up to 6 watts when riding at 50kph. It wasn't just aero performance that mattered though, at the same the airflow for cooling was optimised to ensure you'll remain cool in the heat of the rush for the finish line. OCTO FIT technology works much like pro cycling footwear, featuring an easy-to-use dial that can adjust how close to your head the helmet sits with a simple flick of the wrist, allowing you to make the most of the INMOLD inner shell, which is fused to the outer section of the helmet under extreme heat for the very best durability on the market. The Utopia is wonderfully comfortable too and that is thanks to washable antibacterial padding that keeps you feeling fresh, and strategically positioned venting that adds moisture-wicking breathability while also reducing noise caused by draughts as you ride.Features:Made with INMOLD technologyStrategically positioned vents for good aerodynamics and a cool headReduced noises caused by draughtsAntibacterial padding - washable and removableOCTO FIT systemWeight: approx. 235g (size M)Head circumference - S - 50-56cm M - 52-58cm L - 59-62cmBuy Kask Protection from Chain Reaction Cycles. The World's Largest Online Bike Store.
Kask Caipi MTB Cycling HelmetThe Kask Caipi MTB Cycling Helmet has been created to meet the demands of the dedicated mountain biker. Extended coverage, easy adjustment and awesome ventilation combine to deliver optimal comfort as you kick up the dirt. Trail-Ready ProtectionYou're in the flow, the grip is good and trail conditions are perfect - however, it can all go wrong quite quickly and you find yourself thrown from your mountain bike. It's here the impressive protection of the Caipi MTB Helmet saves the day. The MIT technology and extended coverage of the head combine to protect you from impact when you hit the dirt. The extended rear section ensures that even if you slip off backwards your protected too and a front visor fends of mud spray, trail-side debris and keeps the sun out of the eyes. Octo Fit adjustment systemProtection is brilliant but comfort is also exceptional. Key to this is Kask's Octo Fit adjustment system. A rubberised rear micro-adjuster provides easy adjustment while the floating cradle and gel contact points provide the perfect pressure-free fit for any head shape. 22 vents ensure your head doesn't suffer from getting too hot and the Sanitized® antimicrobial padding keeps things fresh and prevents an itchy head after a day's riding.At just 250 grams (for a size medium), the Caipi is also remarkably light given its remarkable levels of protection, letting you shred without distraction.Features:MIT Technology - full polycarbonate shell cover22 Airflow ventsOcto Fit adjustment systemEco-Leather strap - nonallergic and washable strapSanitized antimicrobial paddingLightweight polypropylene visor with integrated ventilationEN 1078 - CPSC 1203 - AS/NZS 2063250 g (M size)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Mojito3 Road HelmetThe Kask Mojito3 Road Helmet is even better than ever with significant improvements to protection and a sleek, stylish design. The Mojito has always been a leader in both style and performance. But never ones to rest, the Kask design and engineering team have continued to push the boundaries of cycle helmet performance and the result is the Mojito3.Safety. Comfort. Style. Mojito Cubed.The first thing you'll notice is the sleek design of the Mojito is retained, including iconic tail design, but it gets a modern update, with more natural lines and a fresh streamlined look. With this design, Kask have been able to reduce the overall volume of the helmet so it sits more comfortably, but at the same time, ventilation is improved. Blue Tech padding also adds to the fresh feel, allowing sweat to escape easily, leaving you dry as the heat rises. Cool in looks and cool in performance.Despite the reduced volume, protection has been improved quite significantly. Head protection gets a boost thanks to the increased coverage across the rear and front of the helmet - to quote Kask's figures there is a 32% improvement on protection against impacts to the rear, 25% on frontal impacts and 12% on top impacts, making it the safest Mojito yet.OctoFit retention systemThe Mojito has always been renowned for its superb fit and comfort, made possible by the innovative OctoFit retention system. This system is retained on the Mojito3. Not only does this system allow you to quickly and easily customise the fit around the circumference of your head, the rear cradle moves vertically, allowing the perfect fit across the back of your skull. Not only is this better for your comfort, in the event of a crash it keeps the helmet in place to afford the very best protection.WG11 Safety TestThe Mojito passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Utopia has you covered should you be unfortunate enough to fall from your bike. FeaturesReduced volume, streamlined designImproved ventilationBreathable Blue Tech PaddingOctoFit retention systemPasses WG11 International Safety TestReflective detailsWeighs 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Caipi MTB Cycling HelmetThe Kask Caipi MTB Cycling Helmet has been created to meet the demands of the dedicated mountain biker. Extended coverage, easy adjustment and awesome ventilation combine to deliver optimal comfort as you kick up the dirt. Trail-Ready ProtectionYou're in the flow, the grip is good and trail conditions are perfect - however, it can all go wrong quite quickly and you find yourself thrown from your mountain bike. It's here the impressive protection of the Caipi MTB Helmet saves the day. The MIT technology and extended coverage of the head combine to protect you from impact when you hit the dirt. The extended rear section ensures that even if you slip off backwards your protected too and a front visor fends of mud spray, trail-side debris and keeps the sun out of the eyes. Octo Fit adjustment systemProtection is brilliant but comfort is also exceptional. Key to this is Kask's Octo Fit adjustment system. A rubberised rear micro-adjuster provides easy adjustment while the floating cradle and gel contact points provide the perfect pressure-free fit for any head shape. 22 vents ensure your head doesn't suffer from getting too hot and the Sanitized® antimicrobial padding keeps things fresh and prevents an itchy head after a day's riding.At just 250 grams (for a size medium), the Caipi is also remarkably light given its remarkable levels of protection, letting you shred without distraction.Features:MIT Technology - full polycarbonate shell cover22 Airflow ventsOcto Fit adjustment systemEco-Leather strap - nonallergic and washable strapSanitized antimicrobial paddingLightweight polypropylene visor with integrated ventilationEN 1078 - CPSC 1203 - AS/NZS 2063250 g (M size)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (WG11)The Kask Protone Road Cycling Helmet (WG11) is aerodynamically efficient, light and delivers exceptional ventilation. It also passes the WG11 International Safety Test for rotational and linear impacts, making this the safest Protone yet. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Sintesi Helmet (WG11)From smooth roads to rough gravel to beating the traffic on a commute, the Kask Sintesi Helmet (WG11) is your do-it-all cycling helmet with all the fit and features needed for a safer and comfortable ride. With its compact design, Seamless Shell technology and gloss finish, the Sintesi Helmet (WG11) is the perfect complement to your ride. As you'd expect of Kask, the helmet meets and exceeds safety standards, providing reliable safety performance in the event of an impact. The durable outer shell also protects against minor knocks and bumps, and the Seamless construction gives a sleek finish too.Ergo-Fit Adjustment SystemGetting a comfortable fit is simple with the Kask Ergo-Fit Adjustment System. A twist dial, with a head-wrapping cradle, allows you to secure your helmet in just the right place. It's also engineered to allow for sunglasses arms, avoiding any undue pressure or snagging around the temples. And Breathe. Large front and rear air vents allow air to smoothly flow into and out of the Sintesi. Whether pedalling hard or enjoying a more relaxed pace, this will keep you feeling cooler and more comfortable. Inside, the Blue Tech padding offers excellent moisture management, ensuring comfort all ride long. WG11 Safety Test ProtocolThe Sintesi Helmet meets the stringent WG11 test protocols. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test protocol met, you can be sure the Sintesi has you covered should you be unfortunate enough to fall from your bike. Features:Seamless shell technologyBreathable Blue Tech paddingErgo-Fit adjustment systemMulti-layer chinstrapRear reflective insertPasses WG11 International Safety Test protocols and CE-EN-1078Head circumference: M - 52-58cm / L - 59-62cmWeight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Sintesi Helmet (WG11)From smooth roads to rough gravel to beating the traffic on a commute, the Kask Sintesi Helmet (WG11) is your do-it-all cycling helmet with all the fit and features needed for a safer and comfortable ride. With its compact design, Seamless Shell technology and gloss finish, the Sintesi Helmet (WG11) is the perfect complement to your ride. As you'd expect of Kask, the helmet meets and exceeds safety standards, providing reliable safety performance in the event of an impact. The durable outer shell also protects against minor knocks and bumps, and the Seamless construction gives a sleek finish too.Ergo-Fit Adjustment SystemGetting a comfortable fit is simple with the Kask Ergo-Fit Adjustment System. A twist dial, with a head-wrapping cradle, allows you to secure your helmet in just the right place. It's also engineered to allow for sunglasses arms, avoiding any undue pressure or snagging around the temples. And Breathe. Large front and rear air vents allow air to smoothly flow into and out of the Sintesi. Whether pedalling hard or enjoying a more relaxed pace, this will keep you feeling cooler and more comfortable. Inside, the Blue Tech padding offers excellent moisture management, ensuring comfort all ride long. WG11 Safety Test ProtocolThe Sintesi Helmet meets the stringent WG11 test protocols. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test protocol met, you can be sure the Sintesi has you covered should you be unfortunate enough to fall from your bike. Features:Seamless shell technologyBreathable Blue Tech paddingErgo-Fit adjustment systemMulti-layer chinstrapRear reflective insertPasses WG11 International Safety Test protocols and CE-EN-1078Head circumference: M - 52-58cm / L - 59-62cmWeight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Mistral Aero HelmetBoasting worldwide success and now ready and waiting to be piloted by you. The Kask Mistral Aero Helmet is a firm favourite of Team Sky and has been crafted with the brand’s popular Bambino Helmet in mind. Offering up high-end breathability and advanced comfort certain to keep you riding into the early hours of the evening, the Mistral really does revolutionise cycling safety.Professional FeedbackSpecially engineered to offer high performance in both track and triathlon environments, the Mistral Aero has been tried and tested by the Australian national track team who have enhanced its design with their constructive feedback. Highly breathable, the flow of air around your head is maximised without compromising on structural integrity thanks to the in-moulding technology. Fusing the inner and outer liner together, your ride benefits from a thinner, lightweight outer shell.Providing unrivalled lasting rider comfort, the Mistral sports 3D dry tri-dimensional padding with its multi-layer open cell construction, eliminating pressure points. Pairing with the self-adjusting lateral divider to prevent under-ear discomfort, the Mistral really does put a smile on your face.For the comfort aficionados amongst you, there is an eco-leather chinstrap to reduce skin irritation while the magnetic visor attachment allows for greater protection to your eyes.Features:Highly aerodynamic shape6 slots at the front2 Air outlets at the rear of the helmetAir circulation inside the helmet3D dry tri dimensional paddingIn-moulding technologyChin pad with eco-leather chinstrapSelf-adjusting lateral dividerMagnetic visor attachmentWeight: 345g (medium, 375g with visor)Buy Kask from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Mojito3 Road Cycling Helmet Camo (WG11)With the Kask Mojito3 Road Cycling Helmet Camo (WG11) you have all the features needed to give your cycling a boost in safety. And with its camo colourway, it stands on top of the style podium too. The Mojito has always been a leader in both style and performance. But never ones to rest, the Kask design and engineering team have continued to push the boundaries of cycle helmet performance and the result is the Mojito3.Safety. Comfort. Style. Mojito Cubed. The first thing you'll notice is the sleek design of the Mojito is retained, including iconic tail design, but it gets a modern update, with more natural lines and a fresh streamlined look. With this design, Kask have been able to reduce the overall volume of the helmet so it sits more comfortably, but at the same time, ventilation is improved.Blue Tech padding also adds to the fresh feel, allowing sweat to escape easily, leaving you dry as the heat rises. Cool in looks and cool in performance. Despite the reduced volume, protection has been improved quite significantly. Head protection gets a boost thanks to the increased coverage across the rear and front of the helmet - to quote Kask's figures there is a 32% improvement on protection against impacts to the rear, 25% on frontal impacts and 12% on top impacts, making it the safest Mojito yet. OctoFit retention systemThe Mojito has always been renowned for its superb fit and comfort, made possible by the innovative OctoFit retention system.This system is retained on the Mojito3. Not only does this system allow you to quickly and easily customise the fit around the circumference of your head, the rear cradle moves vertically, allowing the perfect fit across the back of your skull. Not only is this better for your comfort, in the event of a crash it keeps the helmet in place to afford the very best protection. WG11 Safety Testing ProtocolsThe Mojito3 exceeds the stringent WG11 testing protocols. This series of protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bikeFeatures:Reduced volume, streamlined designImproved ventilationBreathable Blue Tech PaddingOctoFit retention systemExceeds WG11 International Safety Test ProtocolsReflective detailsWeight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Mojito X Matt Road HelmetKeep yourself safe should the worst happen without weighing down your performance thanks to the ingenious Mojito X Road Helmet from Kask. It’s packed with a whole heap of innovation, bringing together a tough MIT polycarbonate shell on the outside married to INMOLD tech on the inside for a comfortable fit, easily adjusted for height and width at the back. It does a great job of keeping your head still in a collision, while weighing in at only 220g with an aero-focused shaping that helps you reach for your PBs every time.As well as safety and speed, the Mojito X puts in a mighty performance when it comes to comfort, too. Aero-boosing vent holes, 26 of them in fact, also keep your head perfectly cool and breathable. This works particularly well alongside the antibacterial finish on the padding and strap so that you feel wonderfully fresh and free of odour as you ride, and the strap itself can be removed for washing. Finally, reflective elements in all the right places help keep you safe and seen to other road users.Features:MIT polycarbonate shell for additional protectionMade with INMOLD technology26 large vents for very good ventilationAntibacterial padding and chin pad, washable and removableFitting system on back of the head for width and height adjustmentsReflective elementsWeight: approx. 220 g (size M)Ventilation: 3/5Aerodynamics: 2/5Buy Kask Protection from Chain Reaction Cycles. The World's Largest Online Bike Store.
Kask Mistral Aero HelmetBoasting worldwide success and now ready and waiting to be piloted by you. The Kask Mistral Aero Helmet is a firm favourite of Team Sky and has been crafted with the brand’s popular Bambino Helmet in mind. Offering up high-end breathability and advanced comfort certain to keep you riding into the early hours of the evening, the Mistral really does revolutionise cycling safety.Professional FeedbackSpecially engineered to offer high performance in both track and triathlon environments, the Mistral Aero has been tried and tested by the Australian national track team who have enhanced its design with their constructive feedback. Highly breathable, the flow of air around your head is maximised without compromising on structural integrity thanks to the in-moulding technology. Fusing the inner and outer liner together, your ride benefits from a thinner, lightweight outer shell.Providing unrivalled lasting rider comfort, the Mistral sports 3D dry tri-dimensional padding with its multi-layer open cell construction, eliminating pressure points. Pairing with the self-adjusting lateral divider to prevent under-ear discomfort, the Mistral really does put a smile on your face.For the comfort aficionados amongst you, there is an eco-leather chinstrap to reduce skin irritation while the magnetic visor attachment allows for greater protection to your eyes.Features:Highly aerodynamic shape6 slots at the front2 Air outlets at the rear of the helmetAir circulation inside the helmet3D dry tri dimensional paddingIn-moulding technologyChin pad with eco-leather chinstrapSelf-adjusting lateral dividerMagnetic visor attachmentWeight: 345g (medium, 375g with visor)Buy Kask from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (Matte Finish-WG11)The Kask Protone Road Cycling Helmet has built an enviable reputation for comfort, smooth aerodynamics and excellent cooling. It also now passes the WG11 Safety Test, certifying it's outstanding protection against both direct and rotational impacts. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (Matte Finish-WG11)The Kask Protone Road Cycling Helmet has built an enviable reputation for comfort, smooth aerodynamics and excellent cooling. It also now passes the WG11 Safety Test, certifying it's outstanding protection against both direct and rotational impacts. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (Matte Finish-WG11)The Kask Protone Road Cycling Helmet has built an enviable reputation for comfort, smooth aerodynamics and excellent cooling. It also now passes the WG11 Safety Test, certifying it's outstanding protection against both direct and rotational impacts. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (Matte Finish-WG11)The Kask Protone Road Cycling Helmet has built an enviable reputation for comfort, smooth aerodynamics and excellent cooling. It also now passes the WG11 Safety Test, certifying it's outstanding protection against both direct and rotational impacts. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (Matte Finish-WG11)The Kask Protone Road Cycling Helmet has built an enviable reputation for comfort, smooth aerodynamics and excellent cooling. It also now passes the WG11 Safety Test, certifying it's outstanding protection against both direct and rotational impacts. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (Matte Finish-WG11)The Kask Protone Road Cycling Helmet has built an enviable reputation for comfort, smooth aerodynamics and excellent cooling. It also now passes the WG11 Safety Test, certifying it's outstanding protection against both direct and rotational impacts. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Valegro Road Cycling Helmet (WG11)Impressively light and offering outstanding ventilation, the Kask Valegro Road Cycling Helmet (WG11) is ideal for when the heat is high and effort levels intense. Kask's aim with their Valegro Road Cycling Helmet was to give you the finest level of ventilation while cutting no corners on safety. This they have achieved via their patented MIT technology and precisely engineered vents. MIT uses a polycarbonate shell fused to an impact-absorbing inner EPS liner. By directly joining the layers together shock absorption is improved. At the same time, this engineered solution has allowed Kask to give the Valegro 37 vents without effecting strength and protection. With it's highly vented design air is able to rush inside and warm, damp air easily exhausts to the rear. A highly breathable and quick-wicking interior pad system sees head to pad contact reduced by 70% facilitating even more airflow to your scalp, keeping you cooler as you turn up the power. WG11 Safety TestThe Valegro passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Valegro has you covered should you be unfortunate enough to fall from your bike. Kask Octo-FitThe Kask Octo-Fit offers both excellent security and a precise fit. A rubberised Micro Dial adjuster provides an improved finger grip for adjustment. Floating cradle contact and supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.Resistex® padding Fast-wicking and quick-drying Resistex® padding draws moisture away from your head to keep you drier as your more intense efforts create heat and sweat. This works with the engineered airflow to boost all-ride comfort and the pads are washable to ensure freshness. Features:MIT In-Moulding technology assures a far better level of shock absorptionHighly breathable with fast wicking internal lining and 37 air ventsOcto fit rubberised micro dial adjuster secures fit easily and allows on the bike adjustability5mm 3D Resistex® padding - antistatic, antibacterialEco-leather chinstrap offers a plush and comfortable fitHead to pad contact reduced by 70%Passes WG11 International Safety Test and CE-EN-1078Weight: 180g (S)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (WG11)The Kask Protone Road Cycling Helmet (WG11) is aerodynamically efficient, light and delivers exceptional ventilation. It also passes the WG11 International Safety Test for rotational and linear impacts, making this the safest Protone yet. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone Road Cycling Helmet (WG11)The Kask Protone Road Cycling Helmet (WG11) is aerodynamically efficient, light and delivers exceptional ventilation. It also passes the WG11 International Safety Test for rotational and linear impacts, making this the safest Protone yet. Aerodynamic performance, low weight, maximum ventilation, amazing looksA traditional aerodynamic helmet can be too warm but the vents on a standard road helmet can increase drag. The Protone Road Cycling Helmet (WG11) has a revolutionary design which combines the best of both worlds. Originally developed and extensively wind-tunnel tested together with Team Sky (Now Team INEOS), the Protone delivers professional performance in a sleek and stylish package.The Protone weighs just 215g and uses a 3D Dry padding with a multi-layer open cell construction process to give a more comfortable ride. It has removable and washable inner padding, made from CoolMax® fabrics and its inner padding fabric has been treated using the Sanitized® antimicrobial process. Additionally, its Octo Fit adjustment system guarantees a perfect fit for any kind of head shape.KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. WG11 Safety TestThe Protone passes the stringent WG11 test. This focuses on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With this safety test passed, you can be sure the Protone has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process that gives maximum comfort and performance thanks to a series of technical features: - Several ventilation holes that reduce the head-to-pad contact surface by 70% compared to standard designs - 5mm thick padding material that wicks moisture away from the head and moves it to the helmet’s outer shell – fast - Excellent three-way evaporation Aerator position at the top of the helmet boosts safety - The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Kask Octo-FitRubberised Micro Dial adjuster provides an improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.