A great value and dependable front BMX wheel from Jet BMX. This BMX wheel is a 18” size and will fit any BMX bike made for 18” wheels and accept any 18” BMX tire. Features a sealed bearing hub for a smooth maintenance free ride with a 10mm axle. The single wall rim is made from durable alloy and is laced with stainless steel black coated spokes. ###section### Product Specs WHEEL SIZE: 18" HUB: Jet Sealed AXLE: 10mm Chromoly Male RIM: Single Wall Alloy SPOKES: 36 Straight Gauge Stainless NIPPLES: Brass WEIGHT: 776g
Dependable and affordable Mini or Junior sized 20‚Äù X 1-3/8‚Äù BMX Racing wheelset from Jet BMX. The wheelset features sealed bearings throughout, a lightweight alloy construction and dependable double wall 1-1/8‚Äù rims, A great wheelset for those looking to re-vamp their race bike without breaking the bank. The alloy hubs feature low flanges and 10mm axles running on super-smooth sealed bearings with the rear ready to accept a 16t freewheel. The rims are constructed from lightweight 6061 alloy and feature a durable double wall design, Machined sidewalls and made to accept Presta type valves. Laced together with 28 high-quality stainless-steel spokes with brass nipples. ###section### Product Specs WHEEL SIZE:20” X 1-1/8” HUB:Alloy fully sealed AXLE:10mm DRIVE SIDE:RHD RIM:Alloy Double Wall SPOKES:28 spoke NIPPLES:Brass WEIGHT:Front 820g, Rear 880g
Lightweight set of BMX race handlebars for Junior sized race bikes. The Jet Junior bars are constructed from heat treated 6061 Aluminum and feature a comfortable up sweep, a slight 7 degree back sweep and a Junior sized 4 inch rise with a welded cross bar for added strength and stiffness. ###section### Product Specs Width: 24" Up Sweep: 3° Backsweep: 7° Bar Clamping Diameter: 7/8” standard Bar Type: 2pc Weight: 422g / 14.8 oz ###section### ###shogun-image-section###
Lightweight Aluminum quick release seat clamp from Jet BMX. This seat clamp offers great clamping power whilst also allowing for quick adjustment fir all your post race cool down needs!Available in a range of sizes to fit your BMX race frame. Note the sizes reference the inner diameter of the seat clamp.
Made for use with BMX Race frames with standard Euro BB’s running Square Taper (JIS) Crank sets. These BBs are made from lightweight but durable aluminium cups with quality sealed bearings and super-stiff Cr-mo square taper Spindles. The BB is sized for regular 68mm wide Euro BB’s which are found on most BMX race bikes with a choice of two Spindle lengths (108 or 113mm) to get that perfect crank/frame clearance. Supplied with 2x Spindle Bolts.
Dependable high-performance BMX race chain. Features thin 3/32” wide links for optimum smoothness and weight savings. Designed to fit all BMX race bikes (Will not fit BMX freestyle bikes). Constructed using solid steel pins without bushings for a smoother ride and is treated with a rust-proof coating for a longer, maintenance free life. 112 links. Weight: 350g
The perfect set of cranks for those looking to upgrade or replace their cranks on their ride without breaking the bank. Designed for run both standard Right-hand drive or left-Hand drive and supplied with a sealed bearing Mid BB to fit all modern BMX freestyle bikes. These cranks feature 4130 Crmo arms (170mm long) which have a square profile for added strength and a stamped Jet logo. The spindle is a heat treated 4130 Crmo spindle with 8 splines which makes installation a breeze. Supplied with bearings, spacers and all bolts and washers. ###section### Product Specs Type:3pc Spindle Diameter:19mm Includes BB Bearings:Yes Weight:943g ###shogun-image-section###
A lightweight and dependable Mini sized BMX race bike from Jet designed specifically for riders between approximately 4' 2" and 4' 10". Spec’d out with parts specially selected to fit little hands and feet properly. The Accelerator Mini is built around a tough and lightweight heat treated 6061 Aluminum frame for maximum weight to strength ratio. Parts highlights include sealed bearings throughout, Aluminum mini race handlebars, sturdy Hi-Ten forks and aluminium 3-piece cranks. The whole bike runs on a lightweight and sturdy 28 spoke, double wall 1-1/8” wheelset with sealed bearings for a maintenance free ride. In Summary, The Jet Accelerator Mini is the perfect first BMX race bike with its lightweight, carefully spec’d parts which are all standard BMX sizes and fits, should you wish to customise any parts going forward. ###section### Product Specs FRAME MATERIAL: 6061 Aluminum WHEEL SIZE: 20" TOP TUBE LENGTH: 17.5" CHAIN STAY LENGTH: 13.5" HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: Hi Tensile Steel BARS: Aluminum Mini 2.5” Rise STEM: Alloy 30mm reach HEADSET: 1 1/8” Aheadset BRAKE MOUNTS: Welded V-Mounts BRAKES: Alloy V-Brake FRONT HUB: Sealed Bearing 10mm FRONT RIM: 28 hole Double Wall 1-1/8” REAR HUB: Sealed 10mm with 16t Freewheel REAR RIM: 28 hole Double Wall 1-1/8” TYRES: Arisun 1-1/8” SPROCKET: 39t Spider CRANKS: Alloy 140mm with 4bolt Spider BB: Sealed Square Taper Euro PEDALS: Nylon Mini Platform SEAT: Mini Combo seat/post 22.2mm GEARING: 39/16 WEIGHT: TBC ###section### Product Highlights Mini size. Designed specifically for the smallest racers. Approx 4ft 2" - 4ft 10" (127cm - 148cm) A great BMX race inspired kids BMX bike Lightweight aluminium construction Upgradable with aftermarket parts Carefully selected parts to perfectly fit the size of the rider ###shogun-image-section###
A Lightweight and dependable Pro XL sized BMX race bike best suited to adult riders who are looking for affordable Race bike to get them around the track fast. The Pro XL sizing is best suited to adult riders over 5ft 7” or those who feel they need a little more room on the bike. The Accelerator is built around a lightweight and durable 6061 heat treated Aluminum frame with Race specific geometry, reliable integrated headtube and a striking decal package. The parts package easily out-performs the price tag and boasts sealed bearings throughout, Tough Cr-mo handlebars and Tubular 3-piece cranks to transfer maximum power while maintain an excellent strength to weight ratio. The whole package sits comfortably on a set of fully sealed, full size 1.75” wheels with double wall 36 spoke rims and Race specific 1.75” tires. Like with all Jet’s, all the components use standard BMX sizing so swapping out parts for after-market parts won’t be an issue. If you’re an adult looking for an entry point into BMX racing or a race bike to tear around the local track or pump track then this is for you. ###section### Product Specs FRAME MATERIAL: 6061 Aluminum WHEEL SIZE: 20" TOP TUBE LENGTH: 21.25" CHAIN STAY LENGTH: 14.35” HEAD TUBE ANGLE: 74° SEAT TUBE ANGLE: 71° FORKS: Hi Tensile Steel BARS: Crmo 8.5” Rise STEM: Alloy 50mm top load HEADSET: Integrated 1-1/8” BRAKE MOUNTS: Welded V-Mounts BRAKES: Alloy V-Brake FRONT HUB: Sealed Bearing 10mm FRONT RIM: 36 hole Double Wall REAR HUB: Sealed 10mm with 16t Freewheel REAR RIM: 36 hole Double Wall TYRES: Arisun 1.75” SPROCKET: 44t Spider CRANKS: Crmo 175mm tubular BB: Sealed Euro PEDALS: Nylon Platform SEAT: Nylon Platform GEARING: 44/17 WEIGHT: 21.2lbs ###section### Product Highlights Pro XL sized BMX race bike suited to riders who are 5ft 7" to 6ft tall (170cm - 185cm) A BMX race specific bike great for those riders just getting started Lightweight aluminium construction Upgradable with aftermarket parts Integrated headset ###shogun-image-section###
A Lightweight and dependable 24" Cruiser sized BMX race bike best suited to adult riders who are looking for affordable Race bike to get them around the track fast. The 24" Cruiser sizing is best suited to adult riders over 6ft or those who feel they need a little more room on the bike. The Accelerator is built around a lightweight and durable 6061 heat treated Aluminum frame with Race specific geometry, reliable integrated headtube and a striking decal package. The parts package easily out-performs the price tag and boasts sealed bearings throughout, Tough Cr-mo handlebars and Tubular 3-piece cranks to transfer maximum power while maintain an excellent strength to weight ratio. The whole package sits comfortably on a set of fully sealed, full size 1.75” wheels with double wall 36 spoke rims and Race specific 1.75” tires. Like with all Jet’s, all the components use standard BMX sizing so swapping out parts for after-market parts won’t be an issue. If you’re an adult looking for an entry point into BMX racing or a race bike to tear around the local track or pump track then this is for you. ###section### Product Specs FRAME MATERIAL: 6061 Aluminum WHEEL SIZE: 24" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 391mm HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: Hi-Ten Steel BARS: Hi-Ten steel, 27.5 in width, 6.5 in rise, with cross bar STEM: Alloy 50mm top load HEADSET: Integrated 1-1/8” BRAKE MOUNTS: Welded V-Mounts BRAKES: Alloy V-Brake FRONT HUB: Sealed Bearing 10mm FRONT RIM: 24 x 1.75" REAR HUB: Sealed 10mm with 18t Freewheel REAR RIM: 24 x 1.75" TYRES: Arisun XLR8, 24 in x 1.75 in, wire bead SPROCKET: 42T Spider CRANKS: Crmo 175mm tubular BB: Sealed Euro PEDALS: Nylon Platform SEAT: GEARING: 42/18 WEIGHT: TBC ###section### Product Highlights Cruiser BMX Race bike with larger 24" wheels. A BMX race specific bike great for those riders just getting started Lightweight aluminium construction Upgradable with aftermarket parts Full size 1.75" wide wheels ###shogun-image-section###
A Lightweight and dependable Pro XXL sized BMX race bike best suited to adult riders who are looking for affordable Race bike to get them around the track fast. The Pro XXL sizing is best suited to adult riders over 6ft or those who feel they need a little more room on the bike. The Accelerator is built around a lightweight and durable 6061 heat treated Aluminum frame with Race specific geometry, reliable integrated headtube and a striking decal package. The parts package easily out-performs the price tag and boasts sealed bearings throughout, Tough Cr-mo handlebars, and Tubular 3-piece cranks to transfer maximum power while maintain an excellent strength to weight ratio. The whole package sits comfortably on a set of fully sealed, full size 1.75” wheels with double wall 36 spoke rims and Race specific 1.75” tires. Like with all Jet’s, all the components use standard BMX sizing so swapping out parts for after-market parts won’t be an issue. If you’re an adult looking for an entry point into BMX racing or a race bike to tear around the local track or pump track then this is for you. ###section### Product Specs FRAME MATERIAL: 6061 Aluminum WHEEL SIZE: 20" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 391mm HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: Hi-Ten Steel BARS: Crmo 8.5” Rise STEM: Alloy 50mm top load HEADSET: Integrated 1-1/8” BRAKE MOUNTS: Welded V-Mounts BRAKES: Alloy V-Brake FRONT HUB: Sealed Bearing 10mm FRONT RIM: 36 hole Double Wall REAR HUB: Sealed 10mm with 16t Freewheel REAR RIM: 36 hole Double Wall TYRES: Arisun 1.75” SPROCKET: 44t Spider CRANKS: Crmo 175mm tubular BB: Sealed Euro PEDALS: Nylon Platform SEAT: GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Pro XXL sized BMX race bike suited to riders who are 6ft (185cm) or more... Or those that just want a bit more room. A BMX race specific bike great for those riders just getting started Lightweight aluminium construction Upgradable with aftermarket parts Integrated headset ###shogun-image-section###
The Jet Gladiator has everything you need in a BMX designed for cruising at a seriously affordable price. 24" wheels give the Gladiator its cruiser feel, making the ride a lot comfier and more laidback without sacrificing all of that classic BMX feel. It also boasts some really great parts for the price tag, like the tubular sealed Mid BB cranks, sealed headset, sealed 9t cassette hub, taller 8.4" bars, mid padded seat/post combo and the 2.3" Kenda tyres. ###section### Product Specs FRAME MATERIAL: Hi Ten Steel WHEEL SIZE: 24" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 14.75" HEADTUBE ANGLE: 74.5° SEAT TUBE ANGLE: 70° FORKS: Hi-Ten Steel BARS: 8.4" Hi Ten Steel STEM: Alloy Top Load HEADSET: Sealed Integrated BRAKE MOUNTS: Welded U-Brake BRAKES: U-Brake FRONT HUB: Looseball FRONT RIM: Single Wall, Alloy REAR HUB: 9T Sealed Cassette Hub REAR RIM: Single Wall, Alloy TYRES: Kenda 24 x 2.3" SPROCKET: 25T Steel CRANKS: 3-piece Chromoly 170mm BB: Sealed Mid PEDALS: Platform Plastic SEAT: Padded Combo GEARING: 25/9 WEIGHT: 12.7kg ###section### Product Highlights 24" Wheels for that classic BMX cruiser feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel Strong Hi-ten steel construction U-brake system on welded mounts Great for cruising ###shogun-image-section###
Replacement aluminium top cap from Jet. This top cap will fit any forks with a H24 (24x 1.5mm) thread. Tightens with a 6mm allen key.
Alloy Seat clamp from Jet BMX. This alloy clamp and uses a 6mm clamping bolt and keeps your seat post firmly in place. Size: 25.4mm. Weight: 31g.
The Jet BMX Street Tyre was designed for riders on a budget, BMX is inclusive and Jet want to get everyone riding whatever their budget. Their affordability doesn't mean they're lacking in terms of performance though, they feature a low profile directional pattern across the tread which is super grippy whether you're riding street or ramp. Max pressure rating: 60 psi ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 60 PSI WEIGHT: 710g (25oz) PACK SIZE: Single
With a mix of durable parts and lightweight, low drag 1-3/8” wide wheels this Expert BMX bike is perfectly suited to riders in their early teens (5ft-5ft6”) who have outgrown the mini or Junior bikes which are not quite ready for a full sized Pro bike. The Accelerator is built around a lightweight and durable 6061 Aluminum frame with Race specific geometry, reliable integrated headtube and a striking decal package. The parts package easily out-performs the price tag and boasts sealed bearings throughout, Aluminum handlebars, Dependable Cr-mo forks and forged Aluminum square taper cranks. The whole package sits comfortably on a set of fully sealed 1-3/8” wheels with double wall rims and 32spokes. Like with all Jet’s, all the components use standard BMX sizing so swapping out parts for after-market parts won’t be an issue. If you are looking for an entry point into BMX racing for a rider in their early teens, then you can’t go wrong with the Accelerator. ###section### Product Specs FRAME MATERIAL: 6061 Aluminum WHEEL SIZE: 20" TOP TUBE LENGTH: 19.75" CHAIN STAY LENGTH: 13.65" HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: Hi Tensile Steel BARS: Aluminum Expert 6.5” Rise STEM: Alloy 48mm reach HEADSET: Integrated 1-1/8” BRAKE MOUNTS: Welded V-Mounts BRAKES: Alloy V-Brake FRONT HUB: Sealed Bearing 10mm FRONT RIM: 32 hole Double Wall 1-3/8” REAR HUB: Sealed 10mm with 16t Freewheel REAR RIM: 32 hole Double Wall 1-3/8” TYRES: Arisun 1-3/8” SPROCKET: 42t Spider CRANKS: Alloy 160mm with 4bolt Spider BB: Sealed Square Taper Euro PEDALS: Nylon Platform SEAT: Mini Combo seat/post 22.2mm GEARING: 42/16 WEIGHT: 19.11lbs ###section### Product Highlights Expert sized BMX bike. Designed for the needs of racers who are 5ft" - 5ft 4" (150cm - 165cm) A BMX race specific bike great for those riders just getting started Lightweight aluminium construction Upgradable with aftermarket parts Carefully selected parts to perfectly fit the size of the rider ###shogun-image-section###
Replacement crank spindle spacers from Jet BMX. 6 pack including 2x 0.5mm, 2x 1.5mm and 2x 3mm spindle spacers
Tough and affordable 5-bolt BMX race chainring from Jet. Fits any crank with a 5-bolt Spider. Made from 4140 steel for maximum durability and minimal flex. ###section### Product Specs TYPE: Chainring - 5 Bolt MATERIAL: Steel WEIGHT: 160g