Hope Fortus 26 MTB RimDeveloped for the rigours of cross country (XC) racing and mountain bike (MTB) trail adventures, this high-quality rim features a tough aluminium rim construction for conquering the most demanding of terrain conditions. Hope has also put this model's rim build through a welding process with eyelets for exceptional strength and reliability on the XC course and on the trails. Coming kitted out with a 26mm internal rim width and a 31mm external width, this version provides a substantial surface contact area to maintain balance and stability when your route gets challenging. MTB Rim with Tubeless Ready TechnologyEngineered to meet the demands of today's modern riders and racers, this rim is equipped with tubeless-ready technology for significant performance advantages on your ride. By using model as tubeless, riders will enjoy the ability of being able to run lower tyre pressures for greater stability on rough terrains, increased cornering grip and fewer chances of flats or punctures. This makes the Hope Fortus 26 MTB Rim a reliable companion for accompanying you wherever your next XC or MTB ride takes you.Features: Rim Material: Welded 6061 T6 Aluminium rim with eyelets Use: XC, Trail Rim Internal Width: 26mm Rim External Width: 31mm Rim Height: 20mm Tubeless Ready: Yes Spoke Count: 32 per wheel Single or Pair: Single Rim Tape Included: No, available separatelyManufacturer's Part Numbers: 26": WHSP066 27.5": WHSP067 29": WHSP068Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope AM/FR StemCNC machined from a single piece of 2014 T6 aluminium, the AM/FR stem brings you increased levels of strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market, it's strength and clamping force is further enhanced by the four opposing handlebar clamping bolts. To further reduce the weight, Hope adapted its design to remove extra material but without compromising on toughness or durability.Reasons to Buy: Increased strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market. Reduced weight without compromising durability.Features: Material: CNC Machined from 2014 T6 Aluminium Head size: 1-1/8" Diameter: 31.8mm Invertible: No Stem Cap Included: No Opposing steerer clamp bolts and four-bolt handlebar clamp give exceptionally rigid steering Anodised and laser etched 3D milled detailing Compatible with Hope Light systems Weight: 133g (0°)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
With its opposing steerer tube clamping bolts, the Hope XC/FR stem provides exceptionally rigid steering characteristics for your trail-ready MTB. It’s also available in a wide range of lengths and anodised colour options.
Takes 1.5” headtube (only, not compatible with Cannondale) down to use a 1 1/8” fork. The cups, taper ring and crown race (which is now split for easy installation and removal) are all machined aluminium. Sealing is achieved through an adjustable taper ring cover and integrated rubber seal The bearings also incorporate their own sealing and being made from stainless steel resist corrosion and it’s by-products are much better than a conventional steel bearing. An aftermarket crown race is also available which has 3mm of extra height built into it, which again can be used to help with clearance.
Shares the same benchmark quality as our standard Pro 4 front hub but in a wider design to suit Boost 110mm compatible forks.Key FeaturesBoost 110x15 compatable,Sealed stainless steel cartridge bearings,Hub shell machined from forged aluminium billet,Standard 6 bolt disc fitting,Unsurpassed reliability,Larger diameter flanges, with no increase in weight."The benchmark disc brake compatible front hub"Pro 4 Boost 110mm Front hub Tech SpecsDesigned specifically for use with Boost 110x15 forks,28,32 and 36 hole drilling options available,6 colour options to choose from,Standard 6 bolt rotor fitting,Weight: 188g for 32h option,Hub flanges are moved outboard 5mm compared to the standard 100m front hub to increase wheel stiffness.**Note**Boost 110mm front hub uses a different, wider hub body compared to the standard 100mm Pro 4 front hub
All bearings are from world renowned manufacturers to ensure the highest quality. Also every hub shell and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.
Hope RS4 Rear Road Hub (Rim Brake)Hope's reputation continues to grow internationally; they have achieved global recognition due to the high-quality products they offer to the market. This RS4 Rear Road Hub is strong, smooth, and serviceable. This hub is modestly light at 262 grams; the hub shell is made from T-6 aluminium billet and is paired with stainless steel cartridge bearings for durability and, when the time finally comes, easy servicing.Featuring 44-point engagement, reduced drag ratchet mechanism, and a two-pawl ratchet, this RS4 Rear Road Hub offers a consistently smooth rolling performance.Features:Material: Forged T-6 Aluminium Billet (hub shell); Stainless Steel (cartridge bearings)Axle Width: 130mm44-point engagement (8 deg)Unsurpassed reliabilityServiceableReduced drag ratchet mechanismTwo-pawl ratchet9/10/11-speed Shimano or Campagnolo compatibleWeight: 262g (32 hole Shimano option)Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sturdily built with a tough and trusted 6069-T6 aluminium, this durable and dependable rim lets you take on the most challenging routes with confidence and composure. Bearing a 26mm width, it gives a substantial surface contact area to maintain balance and stability when your route gets rowdier. Coming tubeless-ready for improved puncture protection and cornering grip when fitted with lower inflation tyres, this Fortus model is a hard-wearing hero of an MTB hoop.
Hope RX4 Complete CaliperThe Hope RX4 Complete Caliper features 4 lightweight, Slimline pistons for optimum braking performance and is compatible with SRAM or Shimano drop bar Road brake levers. This brake caliper is aimed at Road and Cyclocross riding and provides exceptional braking power and modulation feel at the levers. Thanks to the 4-piston design, it uses larger brake pads, which have a greater contact patch with the disc rotor and ensure more effective control, and braking performance while dissipating heat much faster.Features: Compatibility: SRAM or Shimano hydraulic drop bar (Road) brake leversPistons: Slimline 4 pistonConstruction: MonoblocNote: does not fit IS mountsWeight: 123g (Post Mount)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Custom Enduro MTB Front WheelHand-Built in the UK, this Custom Enduro MTB Front Wheel from Hope combines the best of the best in mountain bike (MTB) hubs with the best of the rest in rims. The Race Face AR Plus rim is laced to Hope's Pro 4 Hub to bring you an exclusive MTB wheel ideal for enduro riding.Race Face AR Plus RimEngineered to roll with stability and pace over the most demanding terrains, this robust and reliable AR Plus MTB Rim boasts an impressive 40mm width that ensures you get the perfect tyre profile when using Plus tyres. Plus, this rim is tubeless-ready.The Hope Pro 4 hub is also convertible to suit most modern axle standards and the Race Face rim's 40mm internal width means it's compatible with plus-sized off-road tyres.Hope Pro 4 MTB Front HubThe Hope Pro 4 hub builds upon their Pro 2 EVO hub and offers superb attention to detail, excellent rolling performance and thanks to the 4 pawl ratchet, a 10% quicker engagement. A highly durable, beautiful looking hub from Hope.From Hope's very first Ti-glide hubs launched back in 1993, they have had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All the bearings used are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and internal axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features: Rim Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Use: Enduro Internal Rim Width: 40mm - can be used with plus size tyres (2.8"+) External Rim Width: 44mm Spoke Holes: 32 Tubeless Ready: Yes Hub Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings Hand-built in the UK Race Face AR Plus Rim paired with Hope Pro 4 Hub to create a high-performance, unique and durable Enduro wheel Front Boost Hub flanges are moved outboard 5mm compared to the standard non-boost front hub to increase wheel stiffness Axle Compatibility: Multiple Axle and Hub Spacing Options, see selection menu Spoke count: 32 hole Weight: 595gPlease Note: there are multiple front hub options for these wheels via the selection menu at the top of this page.Axle Options: Front: Boost - 15mm x 110mm Thru Axle. Non Boost - 15mm x 110mm Thru AxleBuyHope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Race Face AR Plus rim is laced to Hope's Pro 4 Hub to bring you an exclusive MTB wheel ideal for cross country (XC), trail, enduro and downhill (DH) mountain bike riding. The Hope Pro 4 hub is also convertible to suit most modern axle standards and the Race Face rim's 40mm internal width means it's compatible with plus-sized off-road tyres. Hope Pro 4 MTB Front Hub The Hope Pro 4 hub builds upon their Pro 2 EVO hub and offers superb attention to detail, excellent rolling performance and thanks to the 4 pawl ratchet, a 10% quicker engagement. A highly durable, beautiful looking hub from Hope. From Hope's very first Ti-glide hubs launched back in 1993, they have had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All the bearings used are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and internal axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings Front Boost Hub flanges are moved outboard 5mm compared to the standard non-boost front hub to increase wheel stiffness Axle Compatibility: Multiple Axle and Hub Spacing Options, see selection menu Spoke count: 32 hole Weight: 110mm Non-Boost: 187g; 110mm Boost: 188g Race Face AR Plus Rim Engineered to roll with stability and pace over the most demanding terrains, this robust and reliable AR Plus MTB Rim boasts an impressive 40mm width that ensures you get the perfect tyre profile when using Plus tyres. Plus, this rim is tubeless-ready and versatile for everything from cross country (XC), trail, enduro and downhill riding. Rim Features: Rim Material: Aluminium Use: XC, Trail, Enduro, Downhill Internal Rim Width: 40mm External Rim Width: 44mm Spoke Holes: 32 Tubeless Ready: Yes Weight: 595g Please Note: there are multiple front hub options for these wheels via the selection menu at the top of this page. Axle Options: Front: Boost - 15mm x 110mm Thru Axle. Non Boost - 15mm x 110mm Thru Axle
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Hope Pro 4 Fatsno hub provides unsurpassed reliability and it's exceptionally durable. Machined from a single aluminium billet and finished with easily serviceable sealed stainless steel cartridge bearings; this disc brake compatible mountain bike (MTB) hub will last a lot longer than most high-end models from other brands.
Hope Pro 4 Fatsno Mountain Bike Front HubDesigned to be exceptionally hard-wearing, this Mountain Bike Front Hub from Hope, is the ideal choice for Fat Bikes. This streamlined Front Hub is incredibly adaptable and can be used with a variety of size axles thanks to the Hope End Caps. This hub provides unsurpassed reliability, suitable for the most demanding terrain and is exceptionally durable. Machined from a single aluminium billet and finished with easily serviceable sealed stainless-steel cartridge bearings; this hub is intended to last a lot longer than most high-end models supplied by other manufacturers.Features:Material: Sealed stainless-steel cartridge bearings, Hub shell machined from forged aluminium billetStandard 6 bolt disc fittingUnsurpassed reliabilityCompatibility: Suitable for most axle sizes and disc spacingWeight: 255gBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 MTB Quick Release Front HubHope's Pro 4 MTB Quick Release Front Hub features durable Schaeffler bearings throughout, for a component that benefits from exceptional lightweight rolling that won't weigh you down and a hard-wearing stainless-steel construction.From their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstays of this reputation have been their attention to detail in both the bearings they use and their inspection processes.All bearings are from world-renowned manufacturers to ensure the highest quality. Also every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features:Use: Road, Mountain BikeQuick Release AxleMaterial: Sealed stainless-steel cartridge bearingsHub Shell Material: Machined from forged aluminium billetStandard 6 bolt disc fittingLarger diameter flanges, but no increase in weightConversions available for QR, 9mm, 12mm, 15mm, 20mm and BoostAxle Dimensions: 15mmHub Dimensions: 100mm, 110mm (110mm option is designed specifically for use with Boost 110x15 forks)Spoke Count: 28, 32 holesWeight: 181g (approx.)Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 MTB Quick Release Front HubHope's Pro 4 MTB Quick Release Front Hub features durable Schaeffler bearings throughout, for a component that benefits from exceptional lightweight rolling that won't weigh you down and a hard-wearing stainless-steel construction.From their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstays of this reputation have been their attention to detail in both the bearings they use and their inspection processes.All bearings are from world-renowned manufacturers to ensure the highest quality. Also every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features:Use: Road, Mountain BikeQuick Release AxleMaterial: Sealed stainless-steel cartridge bearingsHub Shell Material: Machined from forged aluminium billetStandard 6 bolt disc fittingLarger diameter flanges, but no increase in weightConversions available for QR, 9mm, 12mm, 15mm, 20mm and BoostAxle Dimensions: 15mmHub Dimensions: 100mm, 110mm (110mm option is designed specifically for use with Boost 110x15 forks)Spoke Count: 28, 32 holesWeight: 181g (approx.)Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 MTB Quick Release Front HubHope's Pro 4 MTB Quick Release Front Hub features durable Schaeffler bearings throughout, for a component that benefits from exceptional lightweight rolling that won't weigh you down and a hard-wearing stainless-steel construction.From their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstays of this reputation have been their attention to detail in both the bearings they use and their inspection processes.All bearings are from world-renowned manufacturers to ensure the highest quality. Also every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features:Use: Road, Mountain BikeQuick Release AxleMaterial: Sealed stainless-steel cartridge bearingsHub Shell Material: Machined from forged aluminium billetStandard 6 bolt disc fittingLarger diameter flanges, but no increase in weightConversions available for QR, 9mm, 12mm, 15mm, 20mm and BoostAxle Dimensions: 15mmHub Dimensions: 100mm, 110mm (110mm option is designed specifically for use with Boost 110x15 forks)Spoke Count: 28, 32 holesWeight: 181g (approx.)Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 MTB Quick Release Front HubHope's Pro 4 MTB Quick Release Front Hub features durable Schaeffler bearings throughout, for a component that benefits from exceptional lightweight rolling that won't weigh you down and a hard-wearing stainless-steel construction.From their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstays of this reputation have been their attention to detail in both the bearings they use and their inspection processes.All bearings are from world-renowned manufacturers to ensure the highest quality. Also every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features:Use: Road, Mountain BikeQuick Release AxleMaterial: Sealed stainless-steel cartridge bearingsHub Shell Material: Machined from forged aluminium billetStandard 6 bolt disc fittingLarger diameter flanges, but no increase in weightConversions available for QR, 9mm, 12mm, 15mm, 20mm and BoostAxle Dimensions: 15mmHub Dimensions: 100mm, 110mm (110mm option is designed specifically for use with Boost 110x15 forks)Spoke Count: 28, 32 holesWeight: 181g (approx.)Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Compatible with the popular Pro 2 Evo rear mountain bike (MTB) rear hub, this Hope SRAM XD Freehub boasts an internal mechanism with four pawls that engage into a 24 tooth steel ratchet. Please Note: Does not suit Hope Pro 2 models.