Joining the highly successful RX4 calipers and RS4 hubs in Hope's road, cyclocross and gravel range, the RX Crankset is lightweight, tough and features an all-new two-piece hollow construction to go with the usual features that set Hope components out from the crowd.Fully CNC machined, two-piece hollow aluminium constructionSelf-extracting axle/arm interface for ease of fitting and removalVersatile Spline mount for chainring or spiderless chainring Spiderless cranks supplied7075 aluminium 30mm oversized axle and 7050 aluminium crank arms are incredibly stiff & strongLightweight at just 518g (172.5mm and 5 bolt spider, w/o BB)The versatile spline mounting system remains the same, so one crankset can be used with single or double chainring spiders as well as the stylish direct mount single chainrings that look incredible. The 30mm 7075 axle provides excellent stiffness and is compatible with the same 30mm Hope bottom bracket to ensure excellent longevity. The stylish anodised aluminium arms are laser-etched and machined to ensure they look fantastic for longer; no signs of heel rub on the arms after one ride here! Lighter, stiffer and still drop-dead gorgeous, the Hope Technology RX Crankset is the perfect finishing touch to any bike that is calling out for patriotic and stylish kit.
The R8+ LED light is Hope s most powerful light with a 4000 lumen (3000 measured) headlamp with an external 6 Cell Battery Pack for long burn time and plenty of light to shred the hardest MTB trails at night!Powerful 4000 lumen (3000 measured) headlamp unit and external battery LED light6 light levels allows riders to up power or increase burntimeSupplied with separate 6 cell ES (energy status) batteryBurntime 1 hour (4000 lumen mode)Includes 6 cell ES battery, bayonet handlebar mountWeight lamp: 180g, battery: 510gThe 8 powerful Cree LED s emit up to 4000 lumens of light for a burntime of up to 1 hour, while 6 settings allow you to tailor the amount of light to the conditions that lay ahead. The batteries ES (energy status) display and back lit power switch means you can easily keep track of what mode you are in and how much battery life you have left. Super powerful yet still lightweight and easy to use, the R8+ comes with bayonet handlebar mount fittings, so you can be ready to shred the trails in no time!
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)