Made to fit frames with 1 1/8" headtubes & fork steerers, the Hope external threadless headset features 2014 T6 machined aluminium cups, taper ring and crown race (which is split for easy installation and removal) and a set of custom INA Swiss manufactured precision cartridge bearing races for durability and performance, all headsets also come complete with Hope's Hed Doctor preload top cap.Protection from the elements is achieved through an adjustable taper ring cover and integrated rubber seal, whilst the bearings also incorporate their own sealing, and being made from stainless steel resist corrosion - a real advantage over a conventional steel bearing.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.