This rim has a big and chunky bead to help reduce the chances of pinch puncturing or flat spotting the rim, but at same time the tiny hollow cavity inside it helps keep the weight right down. The rim also features a cross-lacing design to increase lateral wheel strength, and a offset value hole to help with strength in a common weak spot on aero style rims, this also makes it easier to fit a pump to the valve. This rim has a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. ###section### Product Specs WHEEL SIZE: 20" SEAM: Welded ERD: 383mm HEIGHT: 21mm WIDTH: 34mm SPOKE HOLES: 36h WEIGHT: 408g / 14.4oz
Hand Built right here at Source by BMXers! This Custom Front Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around G-sport’s Roloway front hub which features an oversized inner axle and sealed bearing design for maximum durability. The hub also comes with 2 plastic hub guards and has female 10mm bolts. Laced into the Cinema 888 which is made from tough 6061 aluminium with reinforced Aero design for a super durable front wheel wheel.
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Left Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
Hand Built right here at Source by BMXers! This Custom Rear Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around G-sport’s Roloway cassette hub which is designed to work either as a right hand drive or left hand drive hub. The hub also comes with plastic non drive side hub guard and female 14mm axle with 9t driver, Laced into the Cinema 888 which is made from tough 6061 aluminium with reinforced Aero design for a super durable cassette wheel.
The G-Sport Elite front wheel consists of a G-Sport Roloway front hub with 2 x nylon guards laced onto a 36 hole G-sport Ribcage rim. Comes with G-Sport high pressure rim tape. ###section### Product Specs WHEEL SIZE: 20" HUB: G-Sport Roloway AXLE: Female RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1003g
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
If you take the GSport Ribcage rim and lace it to Roloway cassette hub, you’ll end up with one of the strongest BMX cassette wheels you can get. The RHD/LHD compatible hub features a modern slim shape along with all the durability you've come to expect from a G-Sport hub and features a 7075-T6 aluminum hub shell, super durable and smooth 16003 sealed cartridge hub shell bearings, a 14mm 4130 chromoly axle bolts w/17mm 4130 chromoly female axle and a 9T driver with 3-Pawl independent spring design and precision caged needle bearings. The Roloway is laced to G-Sport's Ribcage rim. The Ribcage has been one of the only rims to have true design breakthroughs in recent years. Since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesn't say GSport on the rim, don't expect it to perform like a G-Sport rim. The strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. Replacement hubguards included. ###section### Product Specs WHEEL SIZE:20" HUB:G-Sport Roloway Cassette Hub AXLE:4130 Chromoly Female Axle DRIVE SIDE:Left & Right Switchable RIM:G-Sport Ribcage SPOKES:36h NIPPLES:Brass WEIGHT:TBC