The legendary Fox 36 is back for 2022 with it's new swoopy chassis and super supple and controlled GRIP 2 damper. Combined they make for a formidable combination that is perfect for hard-charging trail and all mountain bikes.Redesigned lowers with new arch design, bypass channels and pressure bleeders is lighter, stiffer and suitable for 110x15mm Boost axlesGRIP 2 damper with VVC offers impeccable comfort, control and adjustabilityFloat EVOL Air Spring is easy to adjust to your preferenceFloating axle is easy to use and creates perfect chassis alignment for smoother suspension movementPerfect for the latest 140-160mm travel all mountain bikesThe GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise on-the-fly adjustability. For 2022, they ve taken GRIP 2 to the next level by adding our patented VVC technology to the high-speed compression circuit. VVC is a proprietary variable valve control system that allows for external fine-tuning of suspension performance. GRIP 2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork.The lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material to optimise this critical ratio. Fox s all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding.
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The Fox Fork 36 and 38 Mud Guard is an optional mud guard designed specifically for the new 36 and 38 forks (2021 models only).Proprietary and sturdy 4-point direct-mount attachment.Sturdy 4-point attachmentGenuine OE parts
The Fox Fork 36 and 38 Mud Guard is an optional mud guard designed specifically for the new 36 and 38 forks (2021 models only).Proprietary and sturdy 4-point direct-mount attachment.Sturdy 4-point attachmentGenuine OE parts
The Fox Racing Shox 38 is the ultimate suspension fork for the hardest hitting enduro bikes. With huge 38mm stanchions, stunningly stiff lowers and sophisticated GRIP 2 damper, the 38 is built to tackle the toughest, gnarliest trails in the world.Redesigned lowers with new arch design, bypass channels and pressure bleeders is lighter, stiffer and suitable for 110x15mm Boost axlesGRIP 2 damper with VVC offers impeccable comfort, control and adjustabilityFloat EVOL Air Spring is easy to adjust to your preferenceFloating axle is easy to use and creates perfect chassis alignment for smoother suspension movementPerfect for the latest 160-180mm travel enduro bikesThe Fox 38 is a true monster of a fork, designed for the fastest riders and biggest hitting enduro bikes around. With huge 38mm stanchions and monolithic lowers, the 38 is the definition of burly! Not only are the lowers and stanchions supersized for incredible stiffness, the crown and steerer are beefed up too with an elliptical steerer tube to further improve steering precision. The floating axle is not only easy to use also provides perfect chassis alignment for smoother suspension movement. The lowers also have bypass channels to keep the seals well lubricated and pressure bleeders to help keep the forks performing smoother for longer.The 38 isn't just about brawn and stiffness though; thanks to the latest GRIP 2 Damper with Variable Valve Control, the 38 offers incredible comfort and control along with plenty of adjustment. With adjustable high/low-speed compression and high/low-speed rebound, you can get the fork dialled in perfectly to suit your taste and terrain. The Float EVOL air spring is also revised and gets a larger negative spring to help mid-stroke support, furthering improving the forks already impeccable handing and control. If you want the ultimate hard-hitting enduro fork, the Fox Racing Shox 38 Float Factory GRIP 2 Suspension fork is the best choice around!
The Fox Racing Shox 38 is the ultimate suspension fork for the hardest hitting enduro bikes. With huge 38mm stanchions, stunningly stiff lowers and sophisticated GRIP 2 damper, the 38 is built to tackle the toughest, gnarliest trails in the world.Redesigned lowers with new arch design, bypass channels and pressure bleeders is lighter, stiffer and suitable for 110x15mm Boost axlesGRIP 2 damper with VVC offers impeccable comfort, control and adjustabilityFloat EVOL Air Spring is easy to adjust to your preferenceFloating axle is easy to use and creates perfect chassis alignment for smoother suspension movementPerfect for the latest 160-180mm travel enduro bikesThe Fox 38 is a true monster of a fork, designed for the fastest riders and biggest hitting enduro bikes around. With huge 38mm stanchions and monolithic lowers, the 38 is the definition of burly! Not only are the lowers and stanchions supersized for incredible stiffness, the crown and steerer are beefed up too with an elliptical steerer tube to further improve steering precision. The floating axle is not only easy to use also provides perfect chassis alignment for smoother suspension movement. The lowers also have bypass channels to keep the seals well lubricated and pressure bleeders to help keep the forks performing smoother for longer.The 38 isn't just about brawn and stiffness though; thanks to the latest GRIP 2 Damper with Variable Valve Control, the 38 offers incredible comfort and control along with plenty of adjustment. With adjustable high/low-speed compression and high/low-speed rebound, you can get the fork dialled in perfectly to suit your taste and terrain. The Float EVOL air spring is also revised and gets a larger negative spring to help mid-stroke support, furthering improving the forks already impeccable handing and control. If you want the ultimate hard-hitting enduro fork, the Fox Racing Shox 38 Float Factory GRIP 2 Suspension fork is the best choice around!
All the revolutionary features of the brand-new 36 packaged in a super-stout chassis engineered specifically for modern hard-hitting, long travel Enduro-style riding. The all-new 38 is hungry to devour all you can throw at it and ask for more.All-NEW for 38, steerer tube design incorporates elliptical shaping in taper zone, further maximizing stiffness to weight ratio.NEW lower leg bleedersNEW air/oil channelsUnique design maximizes stiffness to weight and offers improved head tube clearance via radical NEW arch shape31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36Updated EVOL air spring58mm crown diameter to match modern frame shape profilesOptional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debrisSPECIFICATION:Damper: GRIPTravel: 170mmOffset: 44mmWheel Size: 27.5" & 29"Axle: 15QR x 110mm BoostSteerer: 1.5 TaperedColour: Matte BlackUpper leg finish: Black Anodised
All the revolutionary features of the brand-new 36 packaged in a super-stout chassis engineered specifically for modern hard-hitting, long travel Enduro-style riding. The all-new 38 is hungry to devour all you can throw at it and ask for more.All new for 38, steerer tube design incorporates elliptical shaping in taper zone, further maximizing stiffness to weight ratio.NEW lower leg bleedersNEW air/oil channelsUpdated GRIP2 damper now with dual VVC (Variable Valve Control) on HSC and HSR circuitsMatching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocksUnique design maximizes stiffness to weight and offers improved head tube clearance via radical NEW arch shape31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36Updated EVOL air spring58mm crown diameter to match modern frame shape profilesOptional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debrisSPECIFICATION:Damper: GRIP2 damper now with dual VVC (Variable Valve Control)Travel: 170mmOffset: 44mmWheel Size: 27.5" & 29"Axle: 15QR x 110mm BoostSteerer: 1.5 TaperedColour: Matte BlackUpper leg finish: Black Anodised
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The Fox Racing Shox 34 has been completely redesigned for 2022 and is better than ever. Lighter, smoother & more tunable than ever before, the 34 Float Factory Grip 2 is the ultimate fork for any lightweight trail bike!Redesigned lowers with new arch design is lighter, stiffer and suitable for 110x15mm Boost axlesGRIP 2 damper with VVC offers impeccable comfort, control and adjustabilityFloat EVOL Air Spring is easy to adjust to your preferenceLower leg bypass channels improve consistency on long descentsPerfect for the latest lightweight 130-140mm travel trail bikesThe 34 gets a completely redesigned chassis for 2022. Lighter, stiffer and featuring Fox's signature new rounded arch and lower leg bypass channels, the 34 cuts a perfect form and is ideally suited to lightweight trail bikes that can still be ridden hard. The arch is also further forward than previously allowing the fork to work with modern oversized headtubes and shorter fork offsets. Keeping the fork under control is Fox's proven GRIP 2 damper with Variable Valve Control that offers incredible comfort and control along with plenty of adjustment. With adjustable high/low-speed compression and high/low-speed rebound, you can get the fork dialled in perfectly to suit your taste and terrain. The Float EVOL air spring is also revised and gets a larger negative spring to help mid-stroke support, furthering improving the forks already impeccable handing and control. If you want the ultimate fork for your lightweight trail bike, the Fox Racing Shox 34 Factory GRIP 2 is simply the best choice around!
The Fox Racing Shox 38 is the ultimate suspension fork for the hardest hitting enduro bikes. With huge 38mm stanchions, stunningly stiff lowers and sophisticated GRIP 2 damper, the 38 is built to tackle the toughest, gnarliest trails in the world.Redesigned lowers with new arch design, bypass channels and pressure bleeders is lighter, stiffer and suitable for 110x15mm Boost axlesGRIP 2 damper with VVC offers impeccable comfort, control and adjustabilityFloat EVOL Air Spring is easy to adjust to your preferenceFloating axle is easy to use and creates perfect chassis alignment for smoother suspension movementPerfect for the latest 160-180mm travel enduro bikesThe Fox 38 is a true monster of a fork, designed for the fastest riders and biggest hitting enduro bikes around. With huge 38mm stanchions and monolithic lowers, the 38 is the definition of burly! Not only are the lowers and stanchions supersized for incredible stiffness, the crown and steerer are beefed up too with an elliptical steerer tube to further improve steering precision. The floating axle is not only easy to use also provides perfect chassis alignment for smoother suspension movement. The lowers also have bypass channels to keep the seals well lubricated and pressure bleeders to help keep the forks performing smoother for longer.The 38 isn't just about brawn and stiffness though; thanks to the latest GRIP 2 Damper with Variable Valve Control, the 38 offers incredible comfort and control along with plenty of adjustment. With adjustable high/low-speed compression and high/low-speed rebound, you can get the fork dialled in perfectly to suit your taste and terrain. The Float EVOL air spring is also revised and gets a larger negative spring to help mid-stroke support, furthering improving the forks already impeccable handing and control. If you want the ultimate hard-hitting enduro fork, the Fox Racing Shox 38 Float Factory GRIP 2 Suspension fork is the best choice around!
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length and decreased insertion depth.Patent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferPlease note: Lever is not included and must be purchased separatelyPerformance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper.Reduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
Whether you're racing to make it to your meeting across town or striving for a personal best down your favourite new trail, the all-new AWL e-bike fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and 100mm-140 mm travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated fender and light mounts, plus mounts for an accessory mounting standard that will be coming out soon. AWL is the most versatile fork Fox have ever made.Legendary Fox performance and durability packaged in an all-new chassis optimised for modern e-Bike applications29" and 27.5" options with clearance for large volume 2.6" tyres with fenders100mm-140mm (29er), 120mm (27.5) travel options58mm and 68mm crown diameters to match all frames29" has 51mm offset / 27.5 has 44mm offsetIntegrated fender and light mounts, plus future-proof new accessory mount standardAward-winning RAIL damper delivers premium suspension performance with intuitive adjustability and maximum durabilityStiff 34mm e-optimised chassis meets the most stringent e-bike testing standards44mm (27.5) and 51mm (29er) rake options160-230mm rotor compatiblee-Bike Optimised - The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the e-cycling continuum have ramped up massively. This has put a whole new set of performance and safety demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs.Race Pedigree - Leveraging Fox s extensive experience with building the world s highest performance off-road suspension systems, the new AWL fork is based around the acclaimed Fox 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plow through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail s sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance.Everyday Adventure Ready - AWL s stout chassis is available in both 27.5 and 29 wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike s electric potential, open up new landscapes, and bring adventure to your everyday ride.
Whether you're racing to make it to your meeting across town or striving for a personal best down your favourite new trail, the all-new AWL e-bike fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and 100mm-140 mm travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated fender and light mounts, plus mounts for an accessory mounting standard that will be coming out soon. AWL is the most versatile fork Fox have ever made.Legendary Fox performance and durability packaged in an all-new chassis optimised for modern e-Bike applications29" and 27.5" options with clearance for large volume 2.6" tyres with fenders100mm-140mm (29er), 120mm (27.5) travel options58mm and 68mm crown diameters to match all frames29" has 51mm offset / 27.5 has 44mm offsetIntegrated fender and light mounts, plus future-proof new accessory mount standardAward-winning RAIL damper delivers premium suspension performance with intuitive adjustability and maximum durabilityStiff 34mm e-optimised chassis meets the most stringent e-bike testing standards44mm (27.5) and 51mm (29er) rake options160-230mm rotor compatiblee-Bike Optimised - The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the e-cycling continuum have ramped up massively. This has put a whole new set of performance and safety demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs.Race Pedigree - Leveraging Fox s extensive experience with building the world s highest performance off-road suspension systems, the new AWL fork is based around the acclaimed Fox 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plow through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail s sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance.Everyday Adventure Ready - AWL s stout chassis is available in both 27.5 and 29 wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike s electric potential, open up new landscapes, and bring adventure to your everyday ride.
Whether you're racing to make it to your meeting across town or striving for a personal best down your favourite new trail, the all-new AWL e-bike fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and 100mm-140 mm travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated fender and light mounts, plus mounts for an accessory mounting standard that will be coming out soon. AWL is the most versatile fork Fox have ever made.Legendary Fox performance and durability packaged in an all-new chassis optimised for modern e-Bike applications29" and 27.5" options with clearance for large volume 2.6" tyres with fenders100mm-140mm (29er), 120mm (27.5) travel options58mm and 68mm crown diameters to match all frames29" has 51mm offset / 27.5 has 44mm offsetIntegrated fender and light mounts, plus future-proof new accessory mount standardAward-winning RAIL damper delivers premium suspension performance with intuitive adjustability and maximum durabilityStiff 34mm e-optimised chassis meets the most stringent e-bike testing standards44mm (27.5) and 51mm (29er) rake options160-230mm rotor compatiblee-Bike Optimised - The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the e-cycling continuum have ramped up massively. This has put a whole new set of performance and safety demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs.Race Pedigree - Leveraging Fox s extensive experience with building the world s highest performance off-road suspension systems, the new AWL fork is based around the acclaimed Fox 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plow through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail s sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance.Everyday Adventure Ready - AWL s stout chassis is available in both 27.5 and 29 wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike s electric potential, open up new landscapes, and bring adventure to your everyday ride.
Podium performance: tailor made for the rigors of modern XC racing. The lightest 34 ever, the all-new 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tuneability, chassis stiffness and strength.All-New chassisNew air/oil channelsNew arch shape offers improved head tube clearance with shorter rakesNew 58mm diameter crownUpdated EVOL air springSmoother Lower Leg Bypass Channels - As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.Stiffer Lower Leg Reach - Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Our new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.More Tuneable Float Evol - Returning with the same legendary suppleness and longevity, the EVOL air spring in 34 s now has an enlarged negative air spring to assist with mid-stroke support. New for 2022, the 34 SC comes with the option to tune the negative air spring with a volume spacer.Specification:Wheel Size: 29"Colours: Shiny Black / Shiny OrangeTravel: 100mm / 120mmOffset: 44mm / 51mmDamper: FIT4 3Pos-Adjust / 3Pos Remote PTL (Push to Lock)Axle to Crown: 530mm (120mm Travel)Max Tyre Size: 29 x 2.40"Rotor Size: 160-180mmSteer tube: 1.5 TaperAxle Options: 15 x 110 QRUpper tube Finish: KashimaStarting Weight: 1496g
Podium performance: tailor made for the rigors of modern XC racing. The lightest 34 ever, the all-new 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tuneability, chassis stiffness and strength.All-New chassisNew air/oil channelsNew arch shape offers improved head tube clearance with shorter rakesNew 58mm diameter crownUpdated EVOL air springSmoother Lower Leg Bypass Channels - As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.Stiffer Lower Leg Reach - Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Our new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.More Tuneable Float Evol - Returning with the same legendary suppleness and longevity, the EVOL air spring in 34 s now has an enlarged negative air spring to assist with mid-stroke support. New for 2022, the 34 SC comes with the option to tune the negative air spring with a volume spacer.Specification:Wheel Size: 29"Colours: Shiny Black / Shiny OrangeTravel: 100mm / 120mmOffset: 44mm / 51mmDamper: FIT4 3Pos-Adjust / 3Pos Remote PTL (Push to Lock)Axle to Crown: 530mm (120mm Travel)Max Tyre Size: 29 x 2.40"Rotor Size: 160-180mmSteer tube: 1.5 TaperAxle Options: 15 x 110 QRUpper tube Finish: KashimaStarting Weight: 1496g