Enduro Bearings ABEC3 698 LLU Max BearingGiving a dependable and durable performance when applied to your frame pivots, this hard-wearing bearing is full of military-grade, high-precision materials to assure the smoothest performance possible. Made without retainers and kitted out with 40% more balls than standard ABEC 3 or 5 bearings, it bears a far higher load. Lubricated with CRC Marine Grease, which will not wash out or break down when wet, it will last longer than most commonly found bearings. Features: Dimensions: 8x19x6mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC Marine Application: Frame Pivots Weight: 7.12g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The entry standard for Enduro bearings. Enduro's ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro's ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgradeBearing Code: MR 2437,Dimensions: 24 x 37 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 30.99g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 698,Dimensions: 8mm x 19mm x 6mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.12g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 6800,Dimensions: 10mm x 19mm x 5mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 5.06g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 688,Dimensions: 8mm x 16mm x 5mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 3.90g.
Raising the bar for military standard, high precision bearings, some of the finest cycling components come standard with the Enduro Bearings MR 18307 bearing. It features hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with a low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The ABEC3 6900 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
Enduro Bearings ABEC3 688 LLU Max BearingOffering a dependable and long-lasting performance when working with your frame pivots, this hard-wearing bearing features military-grade, high-precision materials to ensure you run smoothly. Made without retainers and equipped with 40% more balls than standard ABEC 3 or 5 bearings, it can carry a much higher load. Full of CRC Marine Grease, which will not wash out or break down when wet, they stay lubricated and out-last commonly found bearings. Features: Dimensions: 8x16x5mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC Marine Application: Frame Pivots Weight: 3.9g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Enduro Bearings ABEC3 LLB Bearing (MR 18307)If fast, unrestricted rotation for your bike’s crankset or wheel hub is what you’re looking for, the individual ABEC3 LLB Bearing will bring you the smooth operation you need. Enduro Bearings makes this model with a hardened steel race and bearings, a steel retainer and a double lip seal. This means that it's hard-wearing and offers you excellent durability against harsh riding conditions.Features: Material: Hardened Chromoly (CrMo) Steel races and ball bearings, tough riveted Steel retainers Bearing Code: MR 18307 Dimensions: 18x30x7mm ABEC Rating: 3 Grade: 10 Seals: LLB (dual lip seal) Grease: Mobile HP 222 Application: Hubs, bottom brackets Sold individuallyWeight: 15.10g (approx.)Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease Mobile HP 222: This grease is another high-pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break downBuy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Enduro Bearings ABEC3 6900 LLB BearingThis bearing raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade.Features: Material: Steel Bearing Code: 6900 Dimensions: 10x22x6mm ABEC: 3 Grade: 10 Seals: LLB Grease: Mobile HP 222 Application: Hubs, bottom bracketsWeight: 9.38g (approx)Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features:Bearing Code: 6903,Dimensions: 17 x 30 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 17.13g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Bearing Code: MR 18307,Dimensions: 18 x 30 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 15.10g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Bearing Code: 608,Dimensions: 8 x 22 x 7mm,ABEC: 5,Grade: 5,Seals: SRS,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 11.16g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 699,Dimensions: 9 x 20 x 6mm,ABEC: 5 ,Grade: 5,Seals: LLB,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.10g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 608,Dimensions: 8mm x 22mm x 7mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 11.55g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Key Features: Bearing Code: 686, Dimensions: 6mm x 13mm x 5mm, ABEC: 5, Grade: 5, Seals: LLU, Grease: Kyodo Yushi PS-2, Application: Hubs, Bottom Brackets, Weight: 11.2g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade. Key Features: Bearing Code: 6802,Dimensions: 15 x 24 x 5mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 6.71g.
The ABEC3 6901 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The ABEC3 6801 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
Enduro Bearings ABEC3 6801 LLB BearingTaking high-precision, military-grade bearings to a new level, this ABEC3 bearing rightly comes as standard with most common cycling components. Made with hardened chromium steel races, balls, and tough riveted steel retainers, this durable, low-maintenance bearing is made to stand the test of time and rigorous riding. Features: Dimensions: 12x21x5mm ABEC: 3 Grade: 10 Seals: LLB Grease: Mobile HP 222 Application: Hubs, Bottom Brackets Weight: 5.64g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.