Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
Not all modern mountain bike rims are tubeless compatible, so if you want to take the tubeless plunge but don't want to invest in new wheels, the Effetto Mariposa Caffelatex Tubeless strip is the answer.Lightweight, puncture resistant transparent rim strip makes tubeless conversion easyFit strip and valves to wheels, add sealant to tubeless or tubeless-ready tyres, inflate and go for a rideLong lasting construction can be moved from wheel to wheelSold as a kit including two rim strips and two 40mm tubeless valvesWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather than investing in a new set of wheels, the Effetto Mariposa Caffelatex Rim Strip allows you to convert your regular inner-tube only wheels to tubeless-ready, so you can enjoy puncture-free riding.When using the Caffelatex Rim Strip, you can remove your current rim tape or cloth and install the strip. This is the first step in setting your wheels and tyres up tubeless. The strip helps to make the rim as air tight as possible. When combined with the tyre sealant, this keeps the tyres inflated and more resistant to punctures. The width of the tape varies, so you must select the right size for your rim. The Small Kit suits rims with an external section of 20-24mm, Medium suits 25-29mm and Large suits 30-34mm wide rims. Once the strip and valves are installed you can install your tubeless or tubeless-ready tyres, add your sealant of choice, inflate the tyres and you're good to go! You can finally kiss punctures goodbye. The strips and valves are incredibly durable, so you can easily swap them between wheels if you need to. Thanks to the Effetto Mariposa Caffelatex Rim Strip, you no longer need to have a set of expensive tubeless or tubeless-ready wheels to enjoy the benefits of such a setup.
With tubeless tyres becoming more and more prevalent, more and more riders are enjoying the benefits of tubeless. But what if your rims are not tubeless compatible Effetto Mariposa's Caffelatex Tubeless Tape is the answer, allowing you to convert normal rims to tubeless.Rim tape is incredibly easy to use, converting your rims to tubeless-readyRequires tubeless valves and sealant (Sold separately)Can be used with some non-tubeless-ready MTB tyres not recommended for tube-only road/CX tyresWhile more and more rims are designed from the outset to be used with tubeless and tubeless-ready tyres, there are still a huge number only designed to take tubes. Rather investing in a new set of wheels, the Effetto Mariposa Caffelatex Tubeless Tape allows you to convert your regular inner-tube only wheels to tubeless-ready. Starting with the Caffelatex Tubeless Tape, you can remove your current rim tape or cloth and install the tubeless tape. This is the first step in setting your wheels and tyres up tubeless. The tape helps to make the rim as air tight as possible when combined with the tyre sealant. The width of the tape varies, so you must select the right size for your rim. The S Kit suits rims with an external section of 20-24mm, M suits 25-29mm and L suits 30-34mm wide rims.
The final part of any tubeless kit is the valves. Designed to fit snugly in the rim's valve hole, the Effetto Mariposa Caffelatex Tubeless Valve is lightweight, easy to use and incredibly durable.Lightweight and durable aluminium constructionConic adaptors allow them to adapt to any rim profileSuitable for presta or schrader rimsRemovable valve cores make sealant injection easyThe Caffelatex Tubeless Valves come with clever conic adaptors that allow them to be used with rims drilled for both presta and schrader valves. Constructed from lightweight aluminium, the valves are incredibly durable and also look great. Removable valve cores also make it easy to inject your sealant of choice through the valves and into the tyre. Versatile, lightweight and easy to use, the Effetto Mariposa Caffelatex Tubeless Valves are some of the best you can buy.
The final part of any tubeless kit is the valves. Designed to fit snugly in the rim's valve hole, the Effetto Mariposa Caffelatex Tubeless Valve is lightweight, easy to use and incredibly durable.Lightweight and durable aluminium constructionConic adaptors allow them to adapt to any rim profileSuitable for presta or schrader rimsRemovable valve cores make sealant injection easyThe Caffelatex Tubeless Valves come with clever conic adaptors that allow them to be used with rims drilled for both presta and schrader valves. Constructed from lightweight aluminium, the valves are incredibly durable and also look great. Removable valve cores also make it easy to inject your sealant of choice through the valves and into the tyre. Versatile, lightweight and easy to use, the Effetto Mariposa Caffelatex Tubeless Valves are some of the best you can buy.
The final part of any tubeless kit is the valves. Designed to fit snugly in the rim's valve hole, the Effetto Mariposa Caffelatex Tubeless Valve is lightweight, easy to use and incredibly durable.Lightweight and durable aluminium constructionConic adaptors allow them to adapt to any rim profileSuitable for presta or schrader rimsRemovable valve cores make sealant injection easyThe Caffelatex Tubeless Valves come with clever conic adaptors that allow them to be used with rims drilled for both presta and schrader valves. Constructed from lightweight aluminium, the valves are incredibly durable and also look great. Removable valve cores also make it easy to inject your sealant of choice through the valves and into the tyre. Versatile, lightweight and easy to use, the Effetto Mariposa Caffelatex Tubeless Valves are some of the best you can buy.
The Effetto Mariposa Espresso Inflate & Repair takes all of the pain out of getting a puncture in your inner tube, tubeless tyre or tubular tyre. By combining an inflater with a sealant injector, the Espresso Inflate & Repair will help get you back up and running in no time.Combines tyre inflater with a sealant injector to get you back riding quicklyFlexible silicone hose fits directly to presta valves and is easy to useCaffelatex sealant seals holes in inner tubes up to 1mm and holes in tyres up to 5mm125ml size will inflate up to a 29x3.0 tyreNot only does the Espresso inflate your tyre back up to riding pressure, but the Caffelatex sealant also helps to seal holes up to 5mm. Caffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Combined with the inflating action and the easy to use flexible hose that fits directly to presta valves, should you puncture you can be back up and running in a matter of seconds. Easy to use and incredibly useful, the Effetto Mariposa Espresso Inflate & Repair is perfect for riders who want to fix a puncture in double quick time.
With its pine oil content, Allpine Extra is a powerful yet biodegradable degreaser. It has been developed with pine oil, a natural solvent, to have low ecological impact yet to be highly effective.Powerful degreaser ideal for chainsBiodegradable formulaKind on paint, carbon, chrome500ml bottleCan be used on disc brake rotorsTo deep clean a chain, it is recommended to remove it from the bike and immerse in Allpine Extra for a few minutes. Then scrub the chain with a firm brush (Effetto Cog Brush recommended). Alternatively leave the chain on the bike and use a chain cleaning tool (Effetto Mangiacatena). Rinse the chain with water to flush away the dissolved oil and dirt. Dry the chain before applying fresh lubricant (Effetto Flowerpower Wax recommended). Allpine Extra also cleans disc brake rotors. Remove wheels from bike before cleaning rotors. Apply to a cloth and then wet both disc surfaces. Allow the degreaser to act for a few minutes then rinse with water and dry discs with a clean rag.
With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its natural formula is very effective against dirt. For a light clean, just spray on and wipe away with a dry clean cloth. Not using extra water is efficient and also kind on ebikes with sensitive electronics. A light clean will not remove chain lubricant. For heavier dirt, spray on generously and leave for a few minutes. Allpine Light will break down the dirt naturally. Rinse off with water using a brush or sponge.Biodegradable cleanerKind to the environment1 litre bottle with trigger sprayIdeal for e-bikesNice pine scent
Carbomove from Effetto Mariposa is a release spray, acting at the same time as penetrating oil and as powerful solvent. It s a great ally to free blocked components.Carbomove is very effective to free any blocked component of the bikeIt s the last resort to remove blocked aerodynamic seat-postsEasily cleans Carbogrip tracesDoesn t damage carbon composites or metalsWhen to use it: If the bicycle components have been mounted professionally, using Carbogrip or other specific assembly products, it's quite easy - for example - to modify the saddle height, even after some time. On the other hand, if the components have been assembled dry or not with the right products, repositioning or removing them can be a real challenge. There are ways to resolve the problem, but they all involve the use of brute force. Carbomove is a great help even in desperate cases, penetrating between the surfaces and facilitating their movement.Typical applications:Removal of a seat-postRemoval of threaded bottom bracketsRemoval of aerodynamic extensions from their clampsRemoval of traces of glue from the frame (vinyl stickers)Removal of CarbogripExample - Using Carbomove for a seized seat-post:Create a funnel by wrapping the seat tube with packing tape, leaving it open around the seized seat-postSpray abundantly Carbomove inside the funnel, in order to have the interface between seat-post and seat tube constantly moistenedLet it rest for a few hours. If needed, spray more Carbomove if neededCheck if the seat-post starts to move. If it s still stuck, repeat from #2The length of insertion of the seat-post into the bicycle frame heavily affects the duration (and success) of the operation: if the seat-post is inserted for more than 20 cm, the task becomes very difficult. It is sometimes useful to turn the bicycle upside down, remove the bottom bracket and spray Carbomove inside the frame from there.The worst case scenario is with aerodynamic seat-posts, whose section is not round. This means that their components cannot be twisted. In this case, Carbomove is the best and only option.
Flowerpower is a performance wax-based lubricant using natural ingredients including a high sunflower seed wax content. It is an efficient way to lubricate bicycle chains yet harmless to the environment with its formula avoiding any fluorinated compounds (PFAS), graphene or sulphides.Effective and clean lubricant for chainsHarmless to the environmentStrong adhesion to metal - High sunflower seed wax content adheres to clean metalWater resistant formulaSuitable for road or off-road ridingLong lastingLow friction formulaStore and apply temperature range 5 - 35 ° C (41 - 95 ° F)Made in Italy100mlAfter treatment with Flowerpower lube, the chain will run quietly and more efficiently, giving more power to the rider. It will not attract dirt like oil-based lubes, so the life of the chain is extended. Flowerpower is a wax emulsion based in water, not alcohol. It has a high wax-to-water ratio exceeding 50%. Applied to a clean chain Flowerpower penetrates and coats the chain with a thick layer of wax which anchors to the metal as the water base evaporates. This leaves a long-lasting wax coating that is resistant to pedalling stresses and water from rain or the trail/road.It is recommended that about 4ml of Flowerpower lube is used on a clean chain. This will last approximately 300km in dry riding road conditions or 7,500km per 100ml bottle. Off-road or use in heavy rains are likely to require more frequent applications.
The ideal tool for both professional mechanics and cycling enthusiasts, the Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilityVery small, non-ratcheting head, to operate in tight spacesNo batteries to replaceNo plastic partsMinimal, fixed head: The simple, non-ratcheting head has been designed to operate where space is limited, for example with some seat clamps. This small head is a unique asset to work in tight areas. Compatible with standard 1/4 bits.Lightweight: The light aluminium body keeps the weight below140 g, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: Giustaforza 1-8 has a hard-anodized aluminium body with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics increase its reliability. Each sample is checked and numbered as a single masterpiece.
The home-mechanic s dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package.Capacity from 2 up to 16Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to Use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Minimal Fixed Head: Giustaforza s simple, non-ratcheting head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A State-of-the-Art Tool, Built to Last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
The home-mechanic s dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package.This Deluxe version is equipped with a bicycle-specific bit set:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 and T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, SRAM and Campagnolo high-end groupsets, plus those of reversed-bolt stems.10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.Capacity from 2 up to 16Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to Use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Minimal Fixed Head: Giustaforza s simple, non-ratcheting head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A State-of-the-Art Tool, Built to Last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
With a torque range from 10 up to 60 Nm, this Effetto Giustaforza II 10Nm-60Nm Pro tool is standard equipment of the best cycling workshops. Design is inspired by smaller Giustaforza, constructive quality and reliability are state-of-the art. This bike wrench is supplied with a 3/8-1/2 adapter included (as suggested by Greg Kopecky/Slowtwitch.com in his review).10 up to 60 Nm RangeQuality and reliabilityState-of-the art Torque wrench3/8-1/2 adapter includedCapacity from 10 up to 60 Nm: This torque range is ideal for the elements of the bicycle with the highest torque specifications (bottom bracket, cassettes). In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Unlock the wrench-end knob by gently pulling it and set the desired torque value rotating the knob and reading the torque on the scale. After setting the torque value, push the knob back in place, to prevent unwanted changes to the set value while using the wrench. Depending on the rotation direction of the part you want to tighten, push the square section bar through the wrench head to one side or the other. When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 10-60 has been conceived and produced in Italy. The tool has laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics, increase its reliability. Each sample is checked and numbered as a single masterpiece.Calibration service: The +-4% tolerance is guaranteed for 5000 cycles (5000 clicks ), then the wrench should be re-calibrated. Calibration is a service Effetto offer in their laboratories at the cost of 35 plus shipping expenses. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will be returned to the customer with a calibration certificate.
Targeted at professional users, the Effetto Giustaforza II 2Nm-16Nm Pro is red anodized and has a reversible ratcheting head. The Deluxe Pro version is completed with cycling-specific bits and comes into a practical wrap package.This Deluxe Pro version is equipped with a bicycle-specific bit set:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Ratcheting head: For a higher productivity in professional applications, Giustaforza II Pro gets a very small yet highly reliable ratcheting head. 1/4 square (1/4 square/hex adapter provided, to be able to use standard bits).Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
The Effetto Giustaforza II Pro Anniversary Torque Wrench is made for Effetto Mariposa's 10th anniversary and targeted at professional users. The Giustaforza II 2-16 Pro Anniversary bicycle torque wrench has a gun-metal grey hard anodization and a reversible ratcheting head. This version is completed with cycling-specific bits and comes into a practical workshop case.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilitySmall and highly reliable ratcheting headNo batteries to replaceNo plastic partsDetail of bits:10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Ratcheting head: For a higher productivity in professional applications, Giustaforza Pro Anniversary gets a very small and highly reliable ratcheting head. 1/4 square (1/4 square/hex adapter provided, to be able to use standard bits).Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 Pro Anniversary has been designed and produced in Italy. The wrench body is hard-anodized with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.Bits: Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, SRAM and Campagnolo high-end groupsets, plus those of reversed-bolt stems. All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.
The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, the Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces. This Deluxe version is completed with cycling-specific bits in a practical wrap package.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilityVery small, non-ratcheting head, to operate in tight spacesNo batteries to replaceNo plastic parts10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 1 up to 8 Nm: The Giustaforza 1-8 is especially attractive for very sensitive bolts. On those, where the right torque matters most, tightening values can be easily exceeded without the user knowing. Going as low as 1 Nm puts the Giustaforza 1-8 in a league on its own. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Minimal, fixed head: The simple, non-ratcheting head has been designed to operate where space is limited, for example with some seat clamps. This small head is a unique asset to work in tight areas. Compatible with standard 1/4 bits.Lightweight: The light aluminium body keeps the weight below140 g, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: Giustaforza 1-8 has a hard-anodized aluminium body with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics increase its reliability. Each sample is checked and numbered as a single masterpiece.Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.
The Effetto Mariposa Mangiacatena Chain Cleaner is for quick and effective chain cleaning without the need to remove the chain from the bike, use a chain cleaning tool rather than simple brushes.Effective chain cleaning toolSix rotating brushes clean deep in to chainSturdy handleDual direction design, great on e-bikesReplacement brush kit availableWorks on 5 speed chains, up to 13 speedsMaximum chain width 9mmAlso suitable for single speed transmissionsThe Mangiacatena (Translation: Chain Eater) will thoroughly de-grease and clean the whole chain. It is the tool of its type to be equipped with lamellar (finned) elements at both ends, meaning the degreaser is contained when the chain is moved in either direction. This saves on degreaser, is less messy and very useful on many ebikes where only pedalling forwards moves the chain.Once the tool is assembled around the chain, degreaser is added to the fill level (Effetto Allpine Extra recommended). The chain follows a simple, low resistance path straight through Mangiacatena. First it is squeezed at both ends by the plastic fins then scrubbed clean by six rotating brushes which get soaked in the degreaser.For best results move the chain ten times through Mangiacatena with the tool installed below the Chainstay then repeat with it mounted above the Chainstay. Dispose of the dirty degreaser correctly then repeat the first stage but with water to rinse the chain and brushes. Finally dry the chain with a clean cloth before re-lubrication.
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"