When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This product allows for the precise adjustment of the three axis which are important when installing cleats: fore/aft position, the stance (Q-Factor), and foot angle. While pedalling, leg power is transformed over your feet into propulsion. Therefore, the right position of the feet is of the utmost importance, as it determines performance and comfort. The Ergon TP1 is a serious piece of kit that won't let you down when you need it most.
The new gravity-focused grip series GFR1 from Ergon has been developed and tailored according to the expectations and wishes of Tahnée Seagrave (UK) and her colleague team riders of the Canyon FMD Racing. The Ergon development team always works very closely with athletes and teams, which enables them to design products for the highest demands within their target group and to be used at the very limit. The grip has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower grip zone (finger) is strongly pronounced to keep gripping forces at a minimum when lifting the front wheel. The slim inner stop further assists in finding the right-hand position while still providing free shifter access. The high-strength alloy clamps on the inside keeps the grip from twisting even on carbon bars.
These products meet the comfort and control needs of the most aggressive riders with Enduro and Gravity riding in mind. Boasting a Gravity Control rubber compound, the Ergon MTB grips feature a slip-proof surface and textured zones which are orientated against the rotation of your hand on the bar, for a firm and comfortable hold and position. To top it off, these Ergon GA3 Handlebar Grips come fully equipped with a forged inner clamp and integrated grip end attached to its inner core for superb shock absorption and damping.
ODI Ergon GE1 Evo Handlebar GripsEnjoy exceptional comfort and control when taking on the most aggressive terrains with the Ergon Evo Grips from ODI. Made using Ergon’s GravityControl rubber compound, each handlebar grip includes a slip-proof surface for a reliable and comfortable hold. Complete with a forged inner clamp and integrated grip end attached to the inner core, superb shock absorption and damping ensure a reliable grip whatever the terrain.Advanced Inner ConstructionErgon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there’s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason Ergon adopted this design, was to increase the surface area for the hand right to the grip’s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.Features:Material: Gravity Control Rubber CompoundDefinition of Grip:Handlebar Compatibility: Enduro and Gravity ridingDiameter: 32mmClamp: Cold Forged Aluminium/ CNC machinedSingle or Pair: PairWeight: 110g (set)Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon GE1 Evo Factory GripsThe GE1 Evo Factory Grips build on the success of Ergon's GE1 model by offering an even softer compound for enhanced comfort and an anti-slip finish for extra grip. Designed using feedback from top Enduro World Series riders, these grips actively support a correct torso/forearm position when riding downhill. By rotating the grip area towards the steering axle by 8%, these grips ensure the elbows are raised outwardly for better control.Comfort That LastsIn addition to the comfort provided by the soft compound, the GE1 Evo's feature Ergon's patent-pending inner construction. This consists of a forged inner clamp with a fully integrated grip end that's connected to the inner core. This design provides a soft, vibration damping grip edge enabling your hand to grip right to the grip's edge, which removes pressure from the hand's sensitive outer ulnar nerve.Features: Material: GravityControl Rubber Clamps: Cold Forged Aluminium, CNC Machined, black anodised, carbon-friendly Replaceable bar end plugs Use: MTB, Enduro, Gravity, All-Mountain Size: Standard Option: For glove size Large/X-Large (8.5-10.5); Slim Option: For glove sizes Small/Medium (6.5-8.5) Weight: Standard: 105g (pair); Slim: 90g (pair)Buy Ergon Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
All-Mountain grip with a superb tactile feel thanks to the super soft, UV-stable rubber compound, exclusively developed and manufactured in Germany for Ergon. This allows for greater control on demanding trails.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsDiameter: 30mmThe ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulna nerve stress. The inboard aluminium clamp allows even more grip area at the end of the bars. The grip set is lock-on and carbon bar friendly.
All-Mountain grip with a superb tactile feel thanks to the super soft, UV-stable rubber compound, exclusively developed and manufactured in Germany for Ergon. This allows for greater control on demanding trails.The ergonomic shape fits the contours of the hand and significantly reduced arm pump on long trails. The inner construction varies in thickness allowing greater damping.Key Features:Carbon friendly CNC Aluminium clamps,Standard or Single Gripshift versions,Replaceable bar end plugs,110g per pair..
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
Ergon GA2 GripsDesigned with excellent ergonomics and an ultra-tactile feel, these Ergin GA2 Grips keep your hands and grip comfortable and painless over the most demanding of runs. Shaping to the contours of your hands on the exterior, the inside of the grip has a tapered inner core which protects further by dampening vibrations and bumps, letting you keep full control of your handlebars without worrying about blisters or unnecessary arm pump. Features: Lightweight composite inboard clamps 100% twist resistant Carbon bar friendly Lightweight composite inboard clamps Weight: 170g per pair Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon GD1 Evo Factory GripsThese versatile bar grips feature more damping, control, a super-soft thumb zone as well as an inner stop design, so you can take on all the challenges that come with downhill (DH), enduro and gravity mountain bike riding. After working together with top professionals like Rémy Métailler and Vali Höll, Ergon evolved its renowned GD1 grips even further by offering greater comfort and control in demanding terrain conditions. In addition, this factory version features a unique rubber compound exclusively made in Germany for an even more precise grip feel. The GD1 Evo is twist-proof on carbon handlebars and available in two diameters.Factory Custom RubberCycling grips are repeatedly subject to mechanical wear and abrasion - particularly in an environment as tough as mountain biking. Ergon's exclusive, Factory Custom Rubber compound maintains its high grip properties and precise structure much longer than other compounds.Conical Grip DesignThe GD1 EVO Factory has a conical, tapered shape. The grip diameter gradually increases towards the end of the grip. This increases the damping properties towards the end of the grip while the inboard diameter stays slim and responsive. The result is that you get the combined advantages of great comfort and total control on demanding trails.Features: Grip Material: Factory Custom Rubber Clamp Material: Cold Forged Aluminium, CNC-Machined Use: Mountain Bike (MTB), Downhill (DH), Enduro and Gravity Size: Slim: For S/M glove sizes (6.5 - 8.5); Regular: For L/XL glove sizes (8.5 - 10.5) Single or Pair: Pair End Plugs Included: YesTechnologies: Available in Two Sizes: The GD1 Evo is available in two diameters, standard and slim. Standard is recommended for glove sizes Large / X-Large (8.5 - 10.5) or for riders who want increased cushioning. The Slim version is suitable for glove sizes Small / Medium (6.5 - 8.5) or riders who prefer grips with a smaller grip range. Minimum Effort - Maximum Grip: The anti-slip tread pattern along with the new super soft thumb zone provides maximum grip. Additionally, the slim redesigned inner stop improves the ability to quickly position the hand and ensures full access of the shift levers. The overall design requires maximum control with less gripping force. Grip Rubber Made in Germany: The material used in Ergon grips meets the highest quality purity standards, is TÜV-certified, durable and absolutely unique in the world of cycling grips. The silicone-based, UV-resistant rubber compound of the GD1 EVO Factory is developed and manufactured exclusively for Ergon in Germany. Ergonomics, product design and engineering - all made in Germany. Internal Clamp: The internal aluminum clamp of the GD series leaves ample space for controls as well as supports a wide gripping position. The strength of this clamping system prevents any twisting of the grip, even on carbon bars. Replaceable End Plugs: The GD1's end plugs are replaceable -a useful detail for adding even more longevity to your grips.Manufacturer's Part Numbers: EG-42440103 Frozen Orange Regular Regular EG-42440017 Frozen Stealth Narrow Slim EG-42440105 Frozen Orange Narrow Slim EG-42440012 Frozen Stealth Regular Regular EG-42440203 Frozen Moss/Oil-Slick Regular Regular EG-42440205 Frozen Moss/Oil-Slick Narrow SlimBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
The Ergon GA2 Fat is a thicker, chunkier version of the GA2. The ergonomic optimised form, allows reduced force while gripping, because the grip zones are matched to the hand. The inner construction varies in thickness allowing greater damping.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsMaterial: Gravity Control RubberSize: one sizeDiameter: 33mmThe GA2 Fat is an All-Mountain grip with a superb tactile feel thanks to the super soft, UV-stable rubber compound, exclusively developed and manufactured in Germany for Ergon. This allows greater control even on demanding trails. The ergonomic shape fits the contours of the hand and significantly reduces arm pump on long trails. The inner construction varies in thickness allowing greater damping. The inboard clamp allows even more gripping area at the end of the bars, it is completely secure and carbon bar friendly, with replaceable end plugs.
The GA2 Grips also have an ergonomic shape to fit the contours of the hand, which enables you to enjoy increased hand comfort and reduced arm pump when riding long and demanding trails. In addition to this, they have a tapered inner core that dampens sudden shocks and unwanted feedback.