Shimano Disc Rotor CL Lockring - For Chris King Hubs This is a pack containing one single Shimano CL lockring for Chris King Shimano Centre-Lock disc hubs.Key FeaturesCentre-lock disc lockring,One only,Aluminium.Please note this is a Shimano Lockring suitable for use on Chris King Hubs featuring the Shimano Centre-Lock disc mount system. Image for illustration purposes only.
Seal and snap ring kits specifically for DropSet headset bearings. They keep the elements out and ensure your bearings continue to spin smoothly.PHS815 - For 41mm and 42mm bearings only(Used in all DropSet models),PHS816 - For 52mm bearings only(Used in DropSet 2 and 3).
Chris King bottom brackets utilize Fit Kits to ensure that cranks mate perfectly with Chris King's precision bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.For DUB mountain cranks there are a few extra fitments notes to be aware of. If you have a 68mm BB shell you will need two 2.5mm Cup Spacers.For DUB Super Boost cranks you will need one additional spindle spacer kit.
Chris King - RingDrive 2.0 Lube is a Nano-Particle lubricant engineered by Chris King to further reduce resistance and wear in your Chris King rear hub. In addition to lower resistance and a longer wear life, RingDrive™ Lube 2.0 improves performance in cold weather conditions.To install, simply remove old lubricant and contaminants from your RingDrive™, Drive, and Driven Rings and apply 1-2ml of RingDrive™ Lube 2.0. Only a 2.5mm hex key is required to perform the service.Key FeaturesNano-Particle lubricant,Reduced resistance,Increased wear life,Improved cold weather performance.
This superb model employs a disciplined approach to manufacturing which includes rigorous quality control and highly developed production protocols. Additionally, you'll benefit from top-notch performance from using this top-end product for your ride. BB Conversion Kit 1: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm Road Cranksets Common Cranks*: Shimano Road, FSA road, Rotor BB Conversion Kit 2: Press Fit 30 BB Shells 68mm or 73mm Wide BB Shells 24mm Mountain Cranksets Common Cranks*: Shimano mtn, FSA mtn, FSA SLK Light, Gravity, Race Face mtn, Rotor, Surly BB Conversion Kit 3: Press Fit 30 BB Shells 73mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn BB Conversion Kit 4: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Bontrager mtn, TruVativ mtn, Zinn mtn BB Conversion Kit 5: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm>22mm Road Cranksets Common Cranks*: SRAM road, Bontrager road, TruVativ road, Zinn road BB Conversion Kit 6: Press Fit 24 BB Shells 89.5mm or 92mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Bontrager mtn, TruVativ mtn, Zinn mtn BB Conversion Kit 7: Press Fit 24 BB Shells 86.5mm Wide BB Shells 24mm>22mm Road Cranksets Common Cranks*: SRAM road, Bontrager road, TruVativ road, Zinn road
Chris King bottom brackets utilize Fit Kits to ensure that cranks mate perfectly with Chris King's precision bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.For DUB cranks we have two fit kits to choose from, Fit Kit #1 DUB A and Fit Kit #2 DUB B.Fit Kit #1 DUB A is going to cover all DUB mountain fitments, as well as DUB road fitments with ThreadFit T47 bottom brackets.Fit Kit #2 DUB B is for ThreadFit 30 with DUB road cranks.For use with ThreadFit 30, ThreadFit T47 30i, ThreadFit T47 30x68mm, 73mm, 73mm SB+, 86.5mm, 92mm, and 92mm SB+ BB shells.Common Cranks: DUB 28.99mm spindleFor DUB mountain cranks there are a few extra fitments notes to be aware of. If you have a 68mm BB shell you will need two 2.5mm Cup Spacers.For DUB Super Boost cranks you will need one additional spindle spacer kit.
Chris King Press Fit Conversion KitChris King Precision Components is a performance bicycle component manufacturer that has been operating for decades. Chris King employs a disciplined approach to manufacturing which includes rigorous quality control and highly developed production protocols - giving you top-end products for your ride. BB Conversion Kit 1: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm Road Cranksets Common Cranks*: Shimano Road, FSA road, Rotor BB Conversion Kit 2: Press Fit 30 BB Shells 68mm or 73mm Wide BB Shells 24mm Mountain Cranksets Common Cranks*: Shimano mtn, FSA mtn, FSA SLK Light, Gravity, Race Face mtn, Rotor, Surly BB Conversion Kit 3: Press Fit 30 BB Shells 73mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn BB Conversion Kit 4: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Bontrager mtn, TruVativ mtn, Zinn mtn BB Conversion Kit 5: Press Fit 30 BB Shells 68mm Wide BB Shells 24mm>22mm Road Cranksets Common Cranks*: SRAM road, Bontrager road, TruVativ road, Zinn road BB Conversion Kit 6: Press Fit 24 BB Shells 89.5mm or 92mm Wide BB Shells 24mm>22mm Mountain Cranksets Common Cranks*: SRAM mtn, Bontrager mtn, TruVativ mtn, Zinn mtn BB Conversion Kit 7: Press Fit 24 BB Shells 86.5mm Wide BB Shells 24mm>22mm Road Cranksets Common Cranks*: SRAM road, Bontrager road, TruVativ road, Zinn road Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The InsetTM 3 is designed to fit a 1 1/8" to 1.5" tapered steerer tubed fork and a 44mm to 49mm internal diameter tapered headtube on the bike. Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. Aluminum cups in 10 available colors house our legendary bearings; all made in-house in our Portland, Oregon facility. InSet™ is the unrivaled upgrade for all riding styles. Check out the Chris King Size chartClick here to enlarge.
Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. The modular design of the headset Chris developed in 1976 served as a platform for him to transform the concept of threadless into one of the most iconic pieces in the cycling universe. The Chris King NoThreadSet™ is simple yet without limitation. It is equally appropriate on road or mountain bikes. It has been ridden to mountain bike world titles in both endurance and gravity disciplines and has crossed the finish line under yellow at the Tour de France. The NoThreadSet™ features aluminum cups, bearing cap, and stem cap built around our renowned stainless steel sealed bearings. Each NoThreadSet™ includes a stainless steel baseplate and our custom starnut with bolt. Check out the Chris King Size chartClick here to enlarge.
Key Features:Engineered, manufactured, and assembled in Portland, Oregon USA,Legendary made-in-house bearings,Easily serviceable with a 2.5mm hex and pick or pen knife,Completely re-buildable with our R45 Hub Service Tool,Available with Shiamano/Sram HG or Sram XDR driveshell,Available in 28h, and 32h,Ceramic bearing upgrade available.Specification:Axle Width: 130mm,Flange Diameter DS & NDS: 51mm,Center to Flange DS: 17mm,Center to Flange NDS: 34.3mm.
Chris King DropSet 1 Headset (IS41/IS52)Made with hard-wearing, quality top quality materials, this versatile Chris King headset keeps your fork rotating with smoothly and efficiently when connected to your head tube. Combining a 41mm upper bearing and 52mm lower part, it maintains a solid yet easy grip to your fork with its patented GripLock construction, allowing for uninhibited twisting and turning as you weave your way to your destination. Compatible with Santa Cruz and Yeti frames among others, this reliable and long-lasting headset is an ideal addition to your cockpit.Features: Upper Bearing: 41mm 45x45 Lower Bearing: 52mm 36x45 Design: Patented GripLock construction Compatibility: Santa Cruz, Yeti, Alchemy frames (without baseplate) and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King DropSet 1 Headset (IS41/IS52)Made with hard-wearing, quality top quality materials, this versatile Chris King headset keeps your fork rotating with smoothly and efficiently when connected to your head tube. Combining a 41mm upper bearing and 52mm lower part, it maintains a solid yet easy grip to your fork with its patented GripLock construction, allowing for uninhibited twisting and turning as you weave your way to your destination. Compatible with Santa Cruz and Yeti frames among others, this reliable and long-lasting headset is an ideal addition to your cockpit.Features: Upper Bearing: 41mm 45x45 Lower Bearing: 52mm 36x45 Design: Patented GripLock construction Compatibility: Santa Cruz, Yeti, Alchemy frames (without baseplate) and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The InsetTM 1 is designed to fit a 1 1/8" steerer tubed fork and a 49mm internal diameter straight headtube that requires low stack bearing cups. Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. Aluminum cups in 10 available colors house our legendary bearings; all made in-house in our Portland, Oregon facility. InSet™ is the unrivaled upgrade for all riding styles. Check out the Chris King Size chartClick here to enlarge.
The InsetTM 7 is designed to fit a 1 1/8" to 1.5" tapered steerer tubed fork and a 44mm internal diameter straight headtube on the bike. Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. Aluminum cups in 10 available colors house our legendary bearings; all made in-house in our Portland, Oregon facility. InSet™ is the unrivaled upgrade for all riding styles. Check out the Chris King Size chartClick here to enlarge.
The Inset 3 is designed to fit a 1 1/8" to 1.5" tapered steerer tubed fork and a 44mm to 56mm internal diameter tapered headtube on the bike. Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. Aluminium cups in 10 available colours house our legendary bearings; all made in-house in our Portland, Oregon facility. InSet is the unrivalled upgrade for all riding styles. Check out the Chris King Size chart Click here to enlarge.
Chris King Dropset 2 Integrated Headset (IS42/IS52)An integrated headset made with top quality materials and a versatile design, this Chris King model ensures a smooth rotational interface between your fork and head tube. Consisting of a 42mm upper bearing and 52mm lower part, it holds firmly to your fork thanks to its patented GripLock construction, allowing you to twist and turn with confidence and composure as your route dictates. Suitable for use with Chris King baseplates and 45-degree integrated crown races, this hard-wearing headset is a great match for a variety of frames.Features: Upper Bearing: 42mm 45x45 Lower Bearing: 52mm 45x45 Design: Patented GripLock construction Compatibility: Open, 3T, All City, Low, Cinelli, Lynsky frames and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King NoThreadset Tapered Headset - Sotto VoceUser serviceable and likely to outlast a few frames. Chris King designed the first sealed bearing headset in 1976.Thirty-four years later, the King headset remains a benchmark for quality. No other bicycle component can claim the precision, performance and absolute reliability of a Chris King headset. At Chris King Precision Components, we manufacture each headset in our own facility to exacting standards, using quality-at-the-source methods to minimize waste. Even the sealed, cartridge style bearings are made in-house and are hand-checked. Chris King sealed bearing headsets now feature the Sotto Voce logo mark in all colours. We believe this subtle logo style better complements a quality bicycle. For those who desire the classic King style, black headsets are available with either a Bright Silver King logo or Sotto Voce style King logo.Sotto Voce (sot-toh voh-che) is an Italian term used in music to denote a dramatic lowering of the tone. It literally means “under voice" but can be translated as “soft voice". Tapered Steerers & Headtubes. To accommodate today's newest frames and forks we offer a complete NoThreadSet featuring a 1 1-8" upper cup and a 1.5" lower cup and baseplate.Our devolution™ headset solves one tough problem. Or is it two? How to use your new frame with your old fork? What about using your old frame with a new fork ? Upgrades and crash replacement can lead to all sorts of combination and in today’s electronic marketplace, you can buy all sorts of stuff from all sorts of places. Want to do something out of the ordinary? Devolution™ can make it happen.For tapered 1-1/8" to 1.5" steerer tubes but can be used with 1-1/8" steerer tubes by purchasing a Devolution 1.5 to 1-1/8" Baseplate/crown race.Features:Steerer Tube OD: Tapered 1-1/8" to 1.5" Upper head tube ID: 33.9mmLower head tube ID: 49.6mmUpper head tube ream depth: 10mmLower head tube ream depth: 20mmFork crown seat OD: 39.8mmTotal stack height: 31.7mmLower stack height: 14.0mmWeight: 230gBuy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King Dropset 2 Integrated Headset (IS42/IS52)An integrated headset made with top quality materials and a versatile design, this Chris King model ensures a smooth rotational interface between your fork and head tube. Consisting of a 42mm upper bearing and 52mm lower part, it holds firmly to your fork thanks to its patented GripLock construction, allowing you to twist and turn with confidence and composure as your route dictates. Suitable for use with Chris King baseplates and 45-degree integrated crown races, this hard-wearing headset is a great match for a variety of frames.Features: Upper Bearing: 42mm 45x45 Lower Bearing: 52mm 45x45 Design: Patented GripLock construction Compatibility: Open, 3T, All City, Low, Cinelli, Lynsky frames and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King Dropset 3 Headset IS41/IS52Constructed using top quality materials, this versatile Chris King headset ensures your fork rotates with smoothness and swiftness when connected to your head tube. Comprising of a 41mm upper bearing and 52mm lower part, it keeps a firm grip to your fork thanks to its patented GripLock construction, letting you twist and turn as efficiently as can be. Compatible with Santa Cruz Stigmata frames among others, this durable and dependable headset is a great choice to keep your steering column spinning.Features: Upper Bearing: 41mm 45x45 Lower Bearing: 52mm 36x45 Design: Patented GripLock construction Compatibility: Santa Cruz Stigmata frame (without baseplate), and more Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Chris King InSet 5 Headset InSet™ is the latest addition to the Chris King® NoThreadSet™ family. InSet™ is a low-stack threadless headset designed for use with contemporary frames featuring what would traditionally be called "oversized" headtubes.As times have changed, so have the specifications of many of the greatest bicycle designs. These new large headtubes allow frame manufacturer's greater surface area on which to attach top tubes and downtubes with the overall result being improved frame strength and rigidity. We pride ourselves on adapting Chris' forward-thinking original modular designs into ever-evolving configurations to meet most new bicycle designs. The Chris King® InSet™ now brings King's legendary bearing quality and time-tested durability to even more bicycle models. GripLock™ bearing cap Our InSet headsets feature an all-new bearing cap design. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface. For tapered 1-1/8” to 1.5” steerer tubes but can be used with 1-1/8” steerer tubes by purchasing a Devolution 1.5 to 1-1/8” Baseplate/crown race. Features: Steerer Tube OD – 1-1/8” to 1.5” tapered Upper headtube ID – 49.61mm Lower headtube ID – 49.61mm Upper headtube ream depth – 16mm Lower headtube ream depth – 20mm Fork crown seat OD – 39.8mm Upper stack height – 8.0mm Lower stack height – 4.0mm Weight – 150g Buy Chris King Components from Chain Reaction Cycles, the World's Largest Online Bike Store.