The Burgtec Ride Wide Carbon Enduro Handlebar is one of the most comfortable bars in its class. The perfect combination of a 9-degree back sweep with a 5-degree upsweep creates an ultimate feel that you ll fall in love with instantly. Only available in a 35mm bore, with a 20mm rise the RideWide features suggested cut down marks if 800mm is a little too wide for your style of riding. The Burgtec Ride Wide Carbon Enduro Bar has absolutely nailed the balance between comfort and stiffness, and weighing in at only 247g the Enduro Carbon is a truly exceptional bar. Made from Uni-Directional CarbonBlack carbon UD finish800mm wide, end to end35mm Bar Bore20mm or 30mm riseSuggested cut down marks9-degree back sweep5-degree up sweep258g
Following the success of the Ride Wide Carbon DH bar we've introduced the Ride Wide Carbon Enduro Handlebars. Bars are tricky things they either feel right or wrong and the Ride Wide Carbon Enduro Handlebars definitely feel right. Our classic sweep and rise make you feel in total control of your bike even on the most hairy single track... Plus we’ve shaved some weight off the DH bar to keep your Enduro bike nice and light. As used by Josh Bryceland in the Enduro World Series Finish your cockpit in style and add the bars to a Enduro stem Mk2 stem. Dirt 100 2018 'HIT THE SPOT IN TERMS OF FIT AND FEEL' 800mm Wide UD Carbon 35mm Bar Clamp 20mm/30mm Rise 9º Backsweep 5º Upsweep Weight 247g BUILT TO TAKE SOME BEATING Here is what Pinkbike had to say about our handlebars. 'While it will always come down to personal choice how wide you want to space out your hands on your handlebar Burgtec's 800mm wide enduro-specific Ride Wide Carbon Handlebars unquestionably offer a no-nonsense setup that gives you the option of going that route. With a 35mm diameter and a balanced strength-to-weight ratio that is designed to not compromise its durability. The Ride Wide Carbon Enduro Bar is very stiff with only a limited amount of vibration damping capabilities delivering very precise and direct steering. Together with the short Enduro MK2 Stem it's a cockpit setup that undeniably allows you to go faster with confidence.'
Developed for downhill racing the 800mm Burgtec Ride Wide Carbon DH Handlebars have been created for riders who are pushing the limits and designed with ultimate control and comfort in mind. As used by the Santa Cruz Syndicate riders Greg Minnaar Loris Vergier and Luca Shaw. Where every gram counts but reliability is essential. Dirt 100 2018 'HIT THE SPOT IN TERMS OF FIT AND FEEL' UD Carbon finish 800mm wide Available in 31.8mm / 35mm bar bore 20mm / 30mm rise 9 degree Backsweep 4 degree Upsweep Suggested cut down marks Weight 280g
Burgtec s Penthouse Pedals have developed a bit of a cult following over the years. Designed and produced right here in the UK, they are built to withstand the most challenging of British conditions. The Penthouse is now on its fifth edition, and continues to be an instant hit with aggressive flat pedal riders. Oversized platform with 15mm slimline profile provides incredible grip16 Easy to remove pinsDouble bush and single sealed bearing internalsLightweight 7075 alloy construction and steel axle keep weight downThe MK5 features an oversized platform with 8 pins on each side to provide incredible grip, a 15mm slimline profile to keep weight as low as possible and double bush & single bearing internals for exceptional performance and durability. Offering the perfect balance of grip and low weight performance, combined with a stunning anodised finish in a range of colours, the Burgtec Penthouse MK5s are a serious contender for best flat pedals on the market.
Burgtec s Penthouse Pedals have developed a bit of a cult following over the years. Designed and produced right here in the UK, they are built to withstand the most challenging of British conditions. The Penthouse is now on its fifth edition, and continues to be an instant hit with aggressive flat pedal riders. Oversized platform with 15mm slimline profile provides incredible grip16 Easy to remove pinsDouble bush and single sealed bearing internalsLightweight 7075 alloy construction and steel axle keep weight downThe MK5 features an oversized platform with 8 pins on each side to provide incredible grip, a 15mm slimline profile to keep weight as low as possible and double bush & single bearing internals for exceptional performance and durability. Offering the perfect balance of grip and low weight performance, combined with a stunning anodised finish in a range of colours, the Burgtec Penthouse MK5s are a serious contender for best flat pedals on the market.
Burgtec s Penthouse Pedals have developed a bit of a cult following over the years. Designed and produced right here in the UK, they are built to withstand the most challenging of British conditions. The Penthouse is now on its fifth edition, and continues to be an instant hit with aggressive flat pedal riders. Oversized platform with 15mm slimline profile provides incredible grip16 Easy to remove pinsDouble bush and single sealed bearing internalsLightweight 7075 alloy construction and steel axle keep weight downThe MK5 features an oversized platform with 8 pins on each side to provide incredible grip, a 15mm slimline profile to keep weight as low as possible and double bush & single bearing internals for exceptional performance and durability. Offering the perfect balance of grip and low weight performance, combined with a stunning anodised finish in a range of colours, the Burgtec Penthouse MK5s are a serious contender for best flat pedals on the market.
Burgtec s Penthouse Pedals have developed a bit of a cult following over the years. Designed and produced right here in the UK, they are built to withstand the most challenging of British conditions. The Penthouse is now on its fifth edition, and continues to be an instant hit with aggressive flat pedal riders. Oversized platform with 15mm slimline profile provides incredible grip16 Easy to remove pinsDouble bush and single sealed bearing internalsLightweight 7075 alloy construction and steel axle keep weight downThe MK5 features an oversized platform with 8 pins on each side to provide incredible grip, a 15mm slimline profile to keep weight as low as possible and double bush & single bearing internals for exceptional performance and durability. Offering the perfect balance of grip and low weight performance, combined with a stunning anodised finish in a range of colours, the Burgtec Penthouse MK5s are a serious contender for best flat pedals on the market.
Bigger grippier lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! We didn’t stop to think about the future when our journey started some 17-years ago on the slopes of Schladming in ‘03. The prototype MK1 Penthouse Flat that debuted that weekend inevitably paved the way for the MK2 in ‘07 the MK3 in ‘09 and the MK4 in ‘14. While much has changed in that time our focus towards building the toughest and grippiest flat pedals on the market remains the same. Our goals for the MK5 pedals followed the same design and development path as every other Penthouse Flat pedal before it; utilise any advances in materials and manufacturing balance the weight and durability and maximise the amount of grip. From the MK4 to the MK5 we shed 65 grams per pair increased the platform footprint by 7% the dish by 1mm and decreased the pin width by 0.5mm. Taking on feedback from the MK4 we tried a number of different Q-factors to balance the foot’s position in relation to the cranks. With every flat pedal shoe on the market at our disposal we experimented with different platform sizes pin widths and pin heights to maximise grip underfoot. It was of the utmost importance that the MK5’s internals represent the best of the best. To do this we specced the most wear-resistant bushings from Igus. Their 'Endurance Runner' material - W300 - was a clear winner as this gave unrivalled resistance to external influences. Mud and water ingress is kept at bay with a full contact oil seal this keeps grease in and contaminants out even in the harshest of conditions. This configuration of quality parts is why the Penthouse series has a reputation for outstanding longevity. • Weight: 379g (Steel Axle)• Platform material: 7075 Alloy• Profile: 15mm• Platform: 100mm x 102mm• Dish: 2mm (concave)• Pin material: Stainless steel• Pin width: 3.5mm• Pin height: 4.5mm• Axle Material: EN24T Steel• Internals: 2 x Igus W300 bushes single sealed bearing and inboard rubber oil seal • Colours available: Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold Toxic Barbie Pink (Available in stores only) IS IT POSSIBLE TO MAKE A BETTER PEDAL? Here is what singletrack magazine had to say about the new Mk5 pedal. 'Those of you who can cast your mind back over the past 16 years might be able to remember the first 3 generations of Penthouse mountain bike pedals. Each one was a slight improvement on the last with a nip and tuck here and a refinement there. But by the time they came to the MK4 it was time for a completely new design. It looks like Burgtec is back in the rhythm as the MK5 isn’t a totally new pedal but a refinement over the last.'
The Burgtec Direct Mount MK3 Stem has been pointing some of the world s very best riders downhill for a long time now. Used by the likes of the Santa Cruz Syndicate Team, the Burgtec Direct Mount MK3 Stem has chalked up an impressive number of world cup podium finishes over the last five years, and has been on top of the world championship two years on the bounce. Designed to handle the demands of World Cup spec race bikes, you can rest assured that the Direct Mount MK3 Stem will handle anything you could possible throw at in, a worthy addition to any bike. Fully CNC machined construction and super stiff 35mm or 31.8mm clamp diameterComes with steel bolt hardware as standardDesigned to cope with the demands of World Cup race spec bikesWeight from 130gFits Rockshox Boxxers, Fox 40, DVO, Manitou, Marzocchi and any other forks that use IS stem mounts
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.