The Burgtec Ride Wide Alloy Handlebar is one of the most comfortable bars in its class. The perfect combination of a 9-degree back sweep with a 5-degree upsweep creates an ultimate feel that you ll fall in love with instantly. Available in a 35 or 31.8mm bore, with a 15 or 30mm rise the RideWide also features suggested cut down marks if 800mm is a little too wide for your style of riding. Tested to MotoX safety standards and weighing in at only 300g, the Burgtec Ride Wide Alloy Handlebar is a worthy addition to any bike. Colours: Black800mm Wide, end to end35mm Bar boreAvailable In 15mm or 30mm rise9 Degree back sweep5 Degree up sweepSuggested cut down marksMade from Aluminium tested to MotoX safety standardsWeight 300g
The Burgtec Ride Wide Alloy DH Handlebar is one of the most comfortable bars in its class. The perfect combination of a 9-degree back sweep with a 5-degree upsweep creates an ultimate feel that you ll fall in love with instantly. Available in a 35 or 31.8mm bore, with a 15 or 30mm rise the RideWide also features suggested cut down marks if 800mm is a little too wide for your style of riding. Tested to MotoX safety standards and weighing in at only 300g, the Burgtec Ride Wide Alloy Handlebar is a worthy addition to any bike.800mm Wide31.8mm bar boreAvailable in 15mm or 30mm rise9 Degree back sweep5 Degree up sweepSuggested cut down marksMade from Aluminium tested to Motox safety standardsWeight 300g
The Burgtec Ride Wide Alloy DH Handlebar is one of the most comfortable bars in its class. The perfect combination of a 9-degree back sweep with a 5-degree upsweep creates an ultimate feel that you ll fall in love with instantly. Available in a 35 or 31.8mm bore, with a 15 or 30mm rise the RideWide also features suggested cut down marks if 800mm is a little too wide for your style of riding. Tested to MotoX safety standards and weighing in at only 300g, the Burgtec Ride Wide Alloy Handlebar is a worthy addition to any bike.800mm Wide31.8mm bar boreAvailable in 15mm or 30mm rise9 Degree back sweep5 Degree up sweepSuggested cut down marksMade from Aluminium tested to Motox safety standardsWeight 300g
The Burgtec Ride Wide Alloy Handlebar is one of the most comfortable bars in its class. The perfect combination of a 9-degree back sweep with a 5-degree upsweep creates an ultimate feel that you ll fall in love with instantly. Available in a 35 or 31.8mm bore, with a 15 or 30mm rise the RideWide also features suggested cut down marks if 800mm is a little too wide for your style of riding. Tested to MotoX safety standards and weighing in at only 300g, the Burgtec Ride Wide Alloy Handlebar is a worthy addition to any bike. Colours: Black800mm Wide, end to end35mm Bar boreAvailable In 15mm or 30mm rise9 Degree back sweep5 Degree up sweepSuggested cut down marksMade from Aluminium tested to MotoX safety standardsWeight 300g
Burgtec's first signature handlebar developed with, yes you've guessed it! Josh Bryceland. Josh loved the sweep and rise of the Ride Wide Bars but asked Burgtec to make him something higher. The Rat isn t one of those guys that s crazy on set up but he knows what he wants. His idea was for something more versatile that he could use on all of his bikes. After testing various prototypes he finally narrowed it down to a 38mm and 50mm rise bar, the perfect sweet spot. The initial material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So the Josh Bryceland Special was born. The same unsurpassed comfort and durability as all of the Ride Wide range but just a little Higher.The Rats set up is full 800mm in case you re wondering!800mm wide9 degree back sweep5 degree upsweep38mm or 50mm riseAvailable in 35mm clamp onlyColour BlackWeight 345g
Burgtec's first signature handlebar developed with, yes you've guessed it! Josh Bryceland. Josh loved the sweep and rise of the Ride Wide Bars but asked Burgtec to make him something higher. The Rat isn t one of those guys that s crazy on set up but he knows what he wants. His idea was for something more versatile that he could use on all of his bikes. After testing various prototypes he finally narrowed it down to a 38mm and 50mm rise bar, the perfect sweet spot. The initial material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So the Josh Bryceland Special was born. The same unsurpassed comfort and durability as all of the Ride Wide range but just a little Higher.The Rats set up is full 800mm in case you re wondering!800mm wide9 degree back sweep5 degree upsweep38mm or 50mm riseAvailable in 35mm clamp onlyColour BlackWeight 345g
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.