The Bryton bike mount set is compatible with Bryton Rider series models. Practical, lightweight and easy to fit, the bike mount pack includes 2 bike mounts including bands.Compatible with:Rider 10 / 15 / 15 NeoRider 320 / 420Rider 750Rider 100Rider 310Rider 330Rider 410Rider 530Please note: Not Compatible with Aero 60 Models
The Bryton Smart Cadence Sensor applies both ANT+ and Bluetooth technology. It wirelessly transmits your cadence data to cycling computers and smart phones. With no magnets and exposed parts to line up, it is much easier to install.Easy to Use - Smart Cadence Sensor is so Magnet-less, and it is super easy to install, maintain and move between bikes.Dual Support - Featuring the application of dual technology, ANT+ and Bluetooth, Smart Cadence Sensor can connect to both cycling computers and smart phones. It is compatible with most devices in the market.Improve Yourself - Designed to help you monitor your outdoor and indoor training. Combine it and improve your personal best or compete with other cyclists.Specification - Wireless Technology: Bluetooth 4.0 & ANT+
The Bryton Smart Speed Sensor applies both ANT+ and Bluetooth technology. It wirelessly transmits your speed data to cycling computers and smart phones. With no magnets and exposed parts to line up, it is much easier to install.Easy to Use - Smart Cadence Sensor is so Magnet-less, and it is super easy to install, maintain and move between bikes.Dual Support - Featuring the application of dual technology, ANT+ and Bluetooth, Smart Cadence Sensor can connect to both cycling computers and smart phones. It is compatible with most devices in the market.Improve Yourself - Designed to help you monitor your outdoor and indoor training. Combine it and improve your personal best or compete with other cyclists.Specification - Wireless Technology: Bluetooth 4.0 & ANT+
The Bryton Smart Heart Rate Monitor applies both ANT+ and Bluetooth technology. It wirelessly transmits your heart rate to cycling computers and smart phones.Easy to Use - Smart Heart Rate Monitor goes with a soft elastic strap, providing you a comfortable fit.Dual Support - Featuring the application of dual technology, ANT+ and Bluetooth, Smart Cadence Sensor can connect to both cycling computers and smart phones. It is compatible with most devices on the market.Improve Yourself - Accurately measure your heart beat and captures results to your device for instant feedback or later analysis on Strava, TrainingPeaks and other training sitesSpecification - Wireless Technology: Bluetooth 4.0 & ANT+
The Bryton Smart Speed and Cadence Sensors applies both ANT+ and Bluetooth technology. They wirelessly transmit your data to cycling computers and smart phones. With no magnets and exposed parts to line up, it is much easier to install.Easy to Use - Smart Sensors are Magnet-less, and it is super easy to install, maintain and move between bikes.Dual Support - Featuring the application of dual technology, ANT+ and Bluetooth; the Smart Speed and Smart Cadence Sensors can connect to both cycling computers and smart phones. They are compatible with most devices in the market.Improve Yourself - Designed to help you monitor your outdoor and indoor training. Combine it and improve your personal best or compete with other cyclists.Specification - Wireless Technology: Bluetooth 4.0 & ANT+
Replacement heart rate strap / belt. Compatible with Bryton Smart Heart Rate Monitor.
The Bryton bike mount set is compatible with Bryton Rider series models. Practical, lightweight and easy to fit, the bike mount pack includes 2 bike mounts incl. bands.Compatible with:Rider 10 / 15 / 15 NeoRider 320 / 420Rider 750Rider 100Rider 310Rider 330Rider 410Rider 530Not Compatible with Aero 60 Models
The all new Rider 320 is specially designed to provide a clear and detailed viewing experience on the go. The 2.3 inch Mono LCD screen with 4 easy to access buttons, the Ride320 gives crystal clear access to your ride data anytime of the day or night. With enhanced convenience and compatibility, the Rider 320 provides support for BLE sensors. Allowing you to pair your Speed or Cadence sensor, Heart Rate Monitor or Power Meter including onscreen data for Pedal Power meters.Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides extensive coverage and versatility in all types of terrain, even in dense tree cover, in the mountains, built up urban zones or wide open roads. The Rider320 is ready for use anywhere in the world, thanks to incorporating access to the top 5 Global Navigation Satellite Systems (GNSS).The Rider 320 T bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor & Cadence sensor in the box.Supports up to 72+ functionsPowerful, enhanced features35 hours of battery lifeHigh contrast 2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Quick & simple data screen change via Bryton AppSmart Notifications (SMS, Calls & Emails)Supports Full GNSS (Global)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for altitudeAuto Altitude Calibration by GPSBLE support for connecting to your additional sensorsPedal Power Meter compatibleHeart rate & Power Meter zonesUploads to Strava / Relive / TrainingPeaks / Selfloops Auto SyncLap history: 130 lapsLog history: 300 hoursIn the Box:Rider 320 Main UnitBluetooth/ANT+ Heart Rate MonitorBluetooth/ANT+ Cadence SensorUSB CableBike MountQuick Start GuideSimple but Powerful - Utilizing an advanced high-quality, optically bonded display, the Rider 320 is specially designed to provide a clear and versatile viewing experience Enhancing convenience and compatibility, the Rider 320 provides support for both ANT+ and BLE sensors. Equipped with complete Global Navigation Satellite System (GNSS) support, the Rider 320 provides more extensive coverage and versatility in any type of terrain, even in dense tree/building cover or in the mountains, as well as in more regions by incorporating the top 5 Global Navigation Satellite Systems (GNSS).Crystal Clear Display - Designed to create the best viewing experience, the Rider 320 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 320 after simple pairing.Absolute Precision - The Rider 320 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 72+ Functions - Rider 320 provides rich data for accurately gauging the performance of each ride. It incorporates up to 72+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 320 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.Power Meter Calibration & Pedal Support - The Rider 320 aims to increase the compatibility and functionality of ANT+ Power Meters by allowing riders to easily input crank length and calibrate their power meters for more precise power values. Additionally, the Rider 320 now supports Power Pedals, which can be easily calibrated in the same way and allow detailed L/R pedal power analysis.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 320 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to modify device and grid settings and calibrate altitude all without WLAN connection. The app will also check the firmware version of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive Auto Sync - Compete with worldwide riders through Rider 320 recorded data. The Rider 320 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks, Selfloops and Relive. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.Connectivity:Wireless connectivity: Bluetooth, ANT+Supported Bluetooth sensors: HRM, Speed, CadenceSupported ANT+ sensors: HRM, Speed, Cadence, PowerBryton Active App: via Bluetooth Low Energy (iOS & Android)Automatic activity upload: via Bryton Active AppUpdate Software: via Bryton Update ToolAuto Sync to 3rd Party Platform: Strava, TrainingPeaks, Selfloops, ReliveGolden Cheetah Compatible
If you re looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider420 will pair with all major electronic shifting systems from Shimano Di2, SRAM ETap/AXS & Campagnolo EPS to clearly show gearing information and battery life too. Packed full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full global GNSS, the Rider420 will work where ever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider420.N.B. Sensors are not included, but available separately.Supports up to 80+ functions35 hours of battery life2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Smart Notifications (SMS, Calls & Email)Supports Full GNSS (Global Satellites)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for accurate altitudeAuto Altitude Calibration by GPSANT+/BLE dual band support for all sensorsPedal Power Meter compatibleHeart Rate & Power meter zonesElectronic Shifting supportANT+ FE-C Smart Indoor Trainer supportWorkouts Planning, TrainingPeaks Workout Auto SyncTrack & Turn-by-turn NavigationDistance to next POI IndicationAutomatic upload to STRAVA / / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box:Rider 420 Main UnitUSB CableBike MountSafety LanyardQuick Start GuideSimply Precise - Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3 high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go!Crystal Clear Display - Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.Lead the Way - Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way.Stay Motivated with POI/Peak Info - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing.Absolute Precision - The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 80+ Functions - Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.TrainingPeaks Workout Support - To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.ESS Support - Electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette.Smart Trainer Compatibility - With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally, the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer.Power Meter Pedal Support - The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.
If you re looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider420 will pair with all major electronic shifting systems from Shimano Di2, SRAM ETap/AXS & Campagnolo EPS to clearly show gearing information and battery life too. Packed full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full global GNSS, the Rider420 will work where ever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider420.The Rider 420 H bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor in the box.Supports up to 80+ functions35 hours of battery life2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Smart Notifications (SMS, Calls & Email)Supports Full GNSS (Global Satellites)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for accurate altitudeAuto Altitude Calibration by GPSANT+/BLE dual band support for all sensors Pedal Power Meter compatibleHeart Rate & Powermeter zonesElectronic Shifting supportANT+ FE-C Smart Indoor Trainer supportWorkouts Planning, TrainingPeaks Workout Auto SyncTrack & Turn-by-turn NavigationDistance to next POI IndicationAutomatic upload to STRAVA / / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box:Rider 420 Main UnitANT+/BLE Smart Heart Rate MonitorUSB CableBike MountSafety LanyardQuick Start GuideSimply Precise - Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3 high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go!Crystal Clear Display - Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.Lead the Way - Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way.Stay Motivated with POI/Peak Info - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing.Absolute Precision - The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass (Russia), BDS(China), Galileo (Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 80+ Functions - Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.TrainingPeaks Workout Support - To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.ESS Support - Electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette.Smart Trainer Compatibility - With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally, the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer.Power Meter Pedal Support - The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s Strava, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.
If you re looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider420 will pair with all major electronic shifting systems from Shimano Di2, SRAM ETtap/AXS & Campagnolo EPS to clearly show gearing information and battery life too. Packed full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full global GNSS, the Rider420 will work where ever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider420.The Rider 420T bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor & Cadence sensor in the box.Supports up to 80+ functions35 hours of battery life2.3 Inch Mono LCD (Optical Clear Adhesive Bonding)Smart Notifications (SMS, Calls & Email)Supports Full GNSS (Global Satellites)BLE smart 5.0 (for quick and easy data transfer)Built in barometer for accurate altitudeAuto Altitude Calibration by GPSANT+/BLE dual band support for all sensorsPedal Power Meter compatibleHeart Rate & Power meter zonesElectronic Shifting supportANT+ FE-C Smart Indoor Trainer supportWorkouts Planning, TrainingPeaks Workout Auto SyncTrack & Turn-by-turn NavigationDistance to next POI IndicationAutomatic upload to STRAVA / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box:Rider 420 Main UnitANT+/BLE Smart Heart Rate MonitorANT+/BLE Smart Cadence SensorUSB CableBike MountSafety LanyardQuick Start GuideSimply Precise - Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3 high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go!Crystal Clear Display - Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3 large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance.Lead the Way - Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way.Stay Motivated with POI/Peak Info - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. Absolute Precision - The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass (Russia), BDS(China), Galileo (Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains.Supports Up to 80+ Functions - Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR.35 Hours of Battery Life - The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording.TrainingPeaks Workout Support - To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.ESS Support - Electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette.Smart Trainer Compatibility - With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally, the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer.Power Meter Pedal Support - The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals.Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones.Customizable Data Display via App - Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use!Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as Strava, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.
Designed for demanding cyclists looking for powerful new features and technologies, the all new Rider 750 excites with pre-loaded maps for online navigation and a range of advanced training features well beyond its price tag. The Rider750 also includes new features such as the Bike Radar System and full support for smart trainer bikes as well as compatibility with all of your Bluetooth and ANT+ sensors including all brands of Power meters. With an interactive graphical user interface (GUI) with easy-to-understand icons on a bright 2.8-inch colour touch screen, the Rider 750 offers a compelling user experience. It combines powerful features such as online navigation with pre-loaded maps of the most important regions and address entry by voice command with new technologies such as ANT+ FE-C (Fitness Equipment Control) for smart exercise bikes, 3 highly customizable bike profiles and support for Bike Radar systems. Furthermore, the Rider 750 E is compatible with Shimano Steps and can show the status of your e-bike on the display.The Rider 750 T bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor + Speed & Cadence sensors in the box.2.8-inch colour touch screen with graphical user interface (GUI)Online navigation with OSMOnline search by voice commandGoogle fuzzy searchDownloadable world mapsRoute tracking with POI/peak informationIndoor trainer compatible with ANT+/FE-C connectivity to give control of the Smart trainersVirtual ride simulationTraining with TrainingPeaks3 quickly changeable profilesAutomatic sensor scanWireless connections - BLE/ANT+/ANT+ FE-C / WLANESS supportSupport of Bike Radar SystemsSupport for e-bike (Shimano Steps)In the Box:Rider 750 Main UnitUSB CableBike Mount + Sport Out Front MountBluetooth/Ant+ Heart Rate MonitorBluetooth/Ant+ Speed SensorBluetooth/Ant+ Cadence SensorSafety LanyardQuick Start GuideVersatility at its Core - For cyclists seeking powerful new features and technologies, the Rider 750 incorporates online navigation with preloaded maps and advanced trainings, in combination with new integrations such as Bike Radar System and Smart Trainer support as well as dynamic sensor support.Colour Touchscreen with GUI - Built with a large 2.8 colour touch screen, the Rider 750 incorporates a new intuitive Graphical User Interface (GUI) with dynamic colours corresponding to customized HR / Power zones and easy-to-understand icons. Incorporating both a classic cycling page mode as well as a Graphical Mode for viewing cycling data in a vivid multi-coloured graphical setup.Online Navigation with OSM - Using downloadable OpenStreetMaps (OSM), Rider 750 provides location and detailed direction data at a glance. When using the navigation feature, you can view detailed turn-by-turn route guidance, including distance and direction information before every turn, and, when riding off route, the Rider 750 will automatically reroute to help get the ride back on track.Online Voice Search - With connection to the internet, you can use your voice to search for locations on the Rider 750, eliminating the need to use on-screen keyboards. Available in over 100 languages, the voice search features offer a faster, more intuitive and more convenient to find addresses or POIs.Follow Track with POI/Peak Information - Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info using the Bryton Active App, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way.Virtual Ride - Experience endless possibilities from the comfort of home with Virtual Track Simulation. Utilizing ANT+ FE-C compatibility, the Rider 750 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience.Smart Trainer Workout - Easily create custom virtual workouts for smart trainers with the Rider 750 at home! Training plans can be built with the Bryton Active App and downloaded directly to the Rider 750. With ANT+ FE-C support, the Rider 750 will communicate with your smart trainer to simulate the resistance from the training plan.Smart Trainer Control - Control your smart trainer right from the Rider 750. Customize the trainer's resistance level to fit your training goals or set the target power to achieve your desired wattage.TrainingPeaks Workout - To make training easier than ever, Rider 750 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks and exported to the Rider 750 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals.3 Easy-to-Switch Profiles - Now with support for up to 3 bike profiles, it is easier than ever to customize your device for any type of setup. Settings for each profile can be completely modified, including the ability to rename each profile, for any type of cycling.Auto Sensor Scan - After pairing multiple sensors, the Rider 750 will employ the collective sensor pool to automatically scan for nearby active sensors. Simply confirm the sensor connection with the active sensor and it is ready to go. Using the Bryton Active app, sensor names can be customized for easy recognition.ESS Support - The Rider 750 supports electronic gear-shifting systems including Shimano s Di2, SRAM s eTap and Campagnolo s EPS. Gear information, such as gear ratio, gear combo and even battery life (such as on the ESS), are displayed immediately on the Rider 750, eliminating the need to manually check the crankset and cassette.Bike Radar Support - The Rider 750 supports ANT+ Radar after simple pairing. While in the Meter Page, the radar strip will display approaching vehicles, utilizing the Rider 750 s vivid colour screen for easy-to-understand vehicle icons and colour changes for status, as well as include 3 levels of warning with audio notifications.E-Bike Support - The Rider 750 Incorporating E-Bike support for Shimano Steps, displays E-Bike data for over 160 bicycle brands. It supports ANT+ Radar which displays approaching vehicles through the Rider 750 s vivid screen. It includes 3 warning levels with audio notifications.Sync to Bryton Active App - Enjoy seamless over-the-air synchronization to Bryton Active. Workout data can be automatically synced via WLAN directly from the Rider 750 or via Bluetooth from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. Additionally, using the Bryton Active App, it s possible to sync and plan workouts, downloads planned trips and much more. Also, after simple setup, STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync from your Bryton Active account make it easier to share activities and compare with millions.Strava, TrainingPeaks, Selfloops and Relive with Auto Sync - Compete with worldwide riders through Rider 750 recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 750 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.
The Rider S500 from Bryton is specifically designed with intrepid cyclists at its core, boasting advanced new features and an intuitive user interface on powerful new hardware. Whether you are seeking bold off-road adventures, innovative road features, cutting edge E-Bike support or an out of this world indoor workout companion, the Rider S500 has something for everyone.2.4-inch colour touch screen with graphical user interface (GUI)24-hour battery lifeOnline navigation with OSMOnline search by voice commandGoogle fuzzy searchDownloadable world mapsRoute tracking with POI/peak informationTurn-by-turn navigation from RideWithGPS & KomootClimb challenge featureIndoor trainer compatible with ANT+/FE-C connectivity to give control of the Smart trainersVirtual ride simulationTraining with TrainingPeaks3 quickly changeable profilesAutomatic sensor scanWireless connections - BLE/ANT+/ANT+ FE-C / WLANESS supportSupport of Bike Radar SystemsSupport for e-bike (Shimano Steps)Conversion kit available (sold separately) to allow secure fitment of the Rider S500 to Garmin mountsIn the Box:Rider S500 UnitUSB CableBike Mount + Sport Out Front MountSafety LanyardQuick Start GuideVoice search - Rider S500 eliminates the need for an onscreen keyboard by providing Google Voice search which is available in over 100 languages, offering a quicker, more intuitive and all-round better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself.Turn by turn navigation - Rider S500 provides turn by turn navigation and advanced guidance data, including street names, POIs & Peaks (customizable in Bryton active app), distance and direction information, and more all on pre downloaded regional OSM (OpenStreetMaps) maps.Advanced routing features - When following a route and riding off-track, the Rider S500, in connection with your phone, will reroute to get back on track. Additionally, you can reverse a route to switch the start and end locations as well as retracing an ongoing ride to get back to where you started along the same path.Climb Challenge - Climb to new heights with the climb challenge feature. When approaching a climb, using follow track mode, the Rider S500 will provide a graphical summary of all climbs in the route. During a climb, Rider S500 will plot position on a climb and display gradient, distance remaining and accent remaining.Advanced workout - The new graphical workout overview features workout steps with the ability to zoom in for more detail right from the device. Additionally, during a workout, the remaining progress will be graphically shown on the workout page, giving a much more immersive workout experience.Indoor smart trainer - With ANT+ FE-C Smart Trainer compatibility, the Rider S500 can communicate with your indoor smart trainer to control resistance or power (target resistance/power), simulate custom virtual workouts (smart workout) or even simulate a route (virtual ride).Live Track - Use the Bryton active app to share your live location while on a ride. By sharing your personalised link, your location will automatically be shared until you press stop on your device.Bike radar compatibility - Utilising a connected ANT+ Rear-view radar system, cyclists can view vehicles coming from behind up to 150 metres, with notifications to keep alert.Ambient light sensor - Using the built in ambient light sensor, the Bryton Rider S500 automatically adjust to changing light conditions, ensuring optimal screen settings wherever you ride.
The Rider S500 from Bryton is specifically designed with intrepid cyclists at its core, boasting advanced new features and an intuitive user interface on powerful new hardware. Whether you are seeking bold off- road adventures, innovative road features, cutting edge E-Bike support or an out of this world indoor workout companion, the Rider S500 has something for everyone.2.4-inch colour touch screen with graphical user interface (GUI)24-hour battery lifeOnline navigation with OSMOnline search by voice commandGoogle fuzzy searchDownloadable world mapsRoute tracking with POI/peak informationTurn-by-turn navigation from RideWithGPS & KomootClimb challenge featureIndoor trainer compatible with ANT+/FE-C connectivity to give control of the Smart trainersVirtual ride simulationTraining with TrainingPeaks3 quickly changeable profilesAutomatic sensor scanWireless connections - BLE/ANT+/ANT+ FE-C / WLANESS supportSupport of Bike Radar SystemsSupport for e-bike (Shimano Steps)Conversion kit available (sold separately) to allow secure fitment of the Rider S500 to Garmin mountsIn the Box:Rider S500 UnitUSB CableBike Mount + Sport Out Front MountBluetooth/Ant+ Heart Rate MonitorBluetooth/Ant+ Heart Rate Speed SensorBluetooth/Ant+ Heart Rate Cadence SensorSafety LanyardQuick Start GuideVoice search - Rider S500 eliminates the need for an onscreen keyboard by providing Google Voice search which is available in over 100 languages, offering a quicker, more intuitive and all-round better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself.Turn by turn navigation - Rider S500 provides turn by turn navigation and advanced guidance data, including street names, POIs & Peaks (customizable in Bryton active app), distance and direction information, and more all on pre downloaded regional OSM (OpenStreetMaps) maps.Advanced routing features - When following a route and riding off-track, the Rider S500, in connection with your phone, will reroute to get back on track. Additionally, you can reverse a route to switch the start and end locations as well as retracing an ongoing ride to get back to where you started along the same path.Climb Challenge - Climb to new heights with the climb challenge feature. When approaching a climb, using follow track mode, the Rider S500 will provide a graphical summary of all climbs in the route. During a climb, Rider S500 will plot position on a climb and display gradient, distance remaining and accent remaining.Advanced workout - The new graphical workout overview features workout steps with the ability to zoom in for more detail right from the device. Additionally, during a workout, the remaining progress will be graphically shown on the workout page, giving a much more immersive workout experience.Indoor smart trainer - With ANT+ FE-C Smart Trainer compatibility, the Rider S500 can communicate with your indoor smart trainer to control resistance or power (target resistance/power), simulate custom virtual workouts (smart workout) or even simulate a route (virtual ride).Live Track - Use the Bryton active app to share your live location while on a ride. By sharing your personalised link, your location will automatically be shared until you press stop on your device.Bike radar compatibility - Utilising a connected ANT+ Rear-view radar system, cyclists can view vehicles coming from behind up to 150 metres, with notifications to keep alert.Ambient light sensor - Using the built in ambient light sensor, the Bryton Rider S500 automatically adjust to changing light conditions, ensuring optimal screen settings wherever you ride.
The Rider S800 pushes the boundaries of what cyclists should expect from their GPS cycle computers. Designed with premium materials carefully selected to fully optimize every aspect of this device, the Rider S800 features a streamlined and aerodynamic aesthetic with lightweight construction and a clear 3.4 colour touchscreen, unparalleled endurance with an exceptional 36 hr battery life, and an intuitive user interface on powerful new hardware. Whether you are a thrill seeker, adventurer, or passionate cyclist - no matter where or how you ride, the Rider S800 has you covered. New, cutting-edge features are at the heart of its design, including Explore, Group Ride, Live Tracking, advanced navigation, and workout features, as well as compatibility with indoor smart trainers, rear-view bike radar, cycling dynamics, and more! Cross the Threshold!Featuring an interactive Graphical User Interface (GUI) on a vivid 3.4 colour touchscreen.Online Navigation with Preloaded OSM maps, Voice Search, Route Guidance, Group Ride & Live TrackCycling Dynamics support, power training, and power data analysis have been taken to the next level. Rider S800 can display both static and graphical data on meter pages, including seated/standing position, power phase (PP), platform centre offset (PCO), and right/left balance.Climb Challenge w/ real-time climb info, upcoming climb alerts, and custom climb segmentANT+ FE-C support with Smart Trainer Virtual Track Simulation & Smart Trainer Workout featuresE-Bike ANT+ LEV incl. Shimano Steps, assist mode/level, shifting, batt., range & rear gear positionRadar System support, light sensor, 36 hr battery, BLE 5.0, Electronic Shifting, & GNSS SatelliteClimb Challenge , Reach New Heights - Climb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S800 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid colour climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance.Climb Data & Alert - After configuring a route with Climb Challenge, you can view upcoming climbs, distance to climb start/end, current/starting/ending elevation, elevation countdown, remaining distance, grade, altitude and more right from the Rider S800 Climb page! Moreover, while following a route and approaching a climb, the Rider S800 by default will automatically switch between the Meter and Climb pages to prepare for the upcoming elevation change.Customize Your Climb - When creating or importing a route, the Bryton Active app will automatically generate climb data for your Bryton, Strava, Komoot, or any other 3rd party routes imported into the app, creating a Climb-Challenge compatible ride for the Rider S800. After reviewing the ride, you can choose to further customize these climbs by adjusting the total quantity, range of climbs, start/end points, and more via the Bryton Active app!Cycling Dynamics - Featuring Cycling Dynamics support, power training, and power data analysis has been taken to the next level. After pairing compatible power meter pedals, the Rider S800 can display both static and graphical data on meter pages, including seated/standing position, power phase (PP), platform centre offset (PCO), and right/left balance all on the Rider S800 s large, dynamic display.Power Phase - Identify where you generate the most torque and take your workouts to the next level! With a compatible power meter pedal system connected, determine the angle and location where your concentration of power is produced as well as the differences between left and right leg output. Enhance your workouts with better visualization of your pedal strokes.Platform Centre Offset - Using Platform Centre Offset (PCO) data to better measure how the force is distributed across the pedal platform during the pedal stroke relative to centre, you can achieve an improved centre of symmetry, helping you determine the optimal cleat position, maximum efficiency area and the ideal bike configuration.Seated/Standing Position - As your riding position fluctuates throughout the duration of a ride, evaluating your seated or standing position status makes it possible to accurately identify your position preferences during climbs and sprints with the comparative forces applied to the pedals. The Rider S800 helps to display your current position and how long/often you have been in this position along your real-time power data. By analysing your unique rider position metric, you can determine the effectiveness of each position, learn how each position affects your power output, and establish your tendencies under certain conditions.Group Ride - The Rider S800 is even more fun with friends! Using the Bryton Active app, select your track, invite your friends and see live updates for other riders on your route right from your device. Keep in touch, cheer on your friends or send status updates to others by sending customizable messages directly from the Rider S800. Additionally, with the Bryton Active app, setting up a group ride is as easy as a press of a buttonGroup Chat - Need to get a message out to the group, let someone know about a stop or just want to cheer on another rider With the Rider S800 or Bryton Active app, you can quickly and safely send messages to other riders while on a group ride with the Group Chat feature. Personalize your default messages on the Bryton Active app to send quick replies right from your device or type a custom message on the app at your next stop. Additionally, using voice input, you can create custom hands-free messages while on the road.Live Track - Share your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share with any messaging app with the press of a button. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also your current speed, ride time, trip time, distance, and last updated time!Advanced Workout Features - With a new graphical workout overview with zoom support and advanced new features, including real-time intensity adjustment, TrainingPeaks support, a new resilience workout mode, and workout note features (to add notes from the Bryton Active app or TrainingPeaks), training on the Rider S800 just got even better! View remaining workout progress, customizable power zones on the target power page, and more, all with vivid graphical representation!Indoor Smart Trainer - Boasting powerful new features and with a wide range of integrations, the Rider S800 brings the thrill of the ride to your home smart trainer! With ANT+ FE-C Smart Trainer compatibility, the Bryton Rider S800 can communicate with your indoor Smart Trainer to control resistance or power (target resistance/power), simulate custom virtual workouts (Smart Workout) or even simulate a route (Virtual Ride).Virtual Ride - Experience endless possibilities from the comfort of home with Virtual Ride Simulation. Utilizing ANT+ FE-C compatibility, the Rider S800 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience.Smart Workout - Easily create custom virtual workouts for smart trainers with the Rider S800 at home! Training plans can be built with the Bryton Active App and downloaded directly to the device. With ANT+ FE-C support, the Rider S800 will communicate with your smart trainer to simulate the resistance from the training plan.Turn-By-Turn Navigation - Whether you are exploring new regions or following a downloaded route, the Rider S800 is the perfect riding companion, providing turn-by-turn navigation and advanced guidance data, including street names (when connected to Bryton Active), POI s & Peaks (customizable in Bryton Active), distance and direction information, and more all on pre-downloaded regional OSM (OpenStreetMaps) maps.Voice Search - The Bryton Rider S800 speaks your language! With a connection to the internet, the Rider S800 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive, and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself!Auto-Rerouting - Wrong turn No problem! The Rider S800 helps you to always keep you on course with auto-rerouting. While connected to the Bryton Active app, the Rider S800 will automatically reroute your course if a different path is taken, and if the connection is lost, the Rider S800 will point you in the right direction to get you back on track!Navigation Back to Start - After a prolonged or complicated ride, effortlessly identify the fastest way back to where you started. The Rider S800 will use your current location to determine the most direct path and generate detailed turn-by-turn directions for your return journey.Ambient Light Sensor - Using the built-in ambient light sensor, the Bryton Rider S800 can automatically adjust its backlight based on the lighting conditions around it. When passing through a tunnel, under trees, etc., the backlight will automatically become brighter to compensate, ensuring optimal screen settings anywhere and anytime you ride!Extra-Large Crisp MIP Display - Designed with a 3.4'' large display, the Rider S800 utilizes MIP (Memory In Pixel) technology coupled with an internal reflection layer to be optimized for a better outdoor viewing experience without screen shadow. The extra-wide MIP display with ultra-narrow bezel offers both crisp, high-contrast readability and a high screen ratio, making this GPS cycle computer Bryton s premiere device with clarity without compromise!36 Hours of Battery Life - Equipped with an enormous 36 hours battery, the Rider S800 has the strength and stamina to take on any challenge.
The Rider S800 pushes the boundaries of what cyclists should expect from their GPS cycle computers. Designed with premium materials carefully selected to fully optimize every aspect of this device, the Rider S800 features a streamlined and aerodynamic aesthetic with lightweight construction and a clear 3.4 colour touchscreen, unparalleled endurance with an exceptional 36 hr battery life, and an intuitive user interface on powerful new hardware. Whether you are a thrill seeker, adventurer, or passionate cyclist - no matter where or how you ride, the Rider S800 has you covered. New, cutting-edge features are at the heart of its design, including Explore, Group Ride, Live Tracking, advanced navigation, and workout features, as well as compatibility with indoor smart trainers, rear-view bike radar, cycling dynamics, and more! Cross the Threshold!Featuring an interactive Graphical User Interface (GUI) on a vivid 3.4 colour touchscreen.Online Navigation with Preloaded OSM maps, Voice Search, Route Guidance, Group Ride & Live TrackCycling Dynamics support, power training, and power data analysis have been taken to the next level. Rider S800 can display both static and graphical data on meter pages, including seated/standing position, power phase (PP), platform centre offset (PCO), and right/left balance.Climb Challenge w/ real-time climb info, upcoming climb alerts, and custom climb segmentANT+ FE-C support with Smart Trainer Virtual Track Simulation & Smart Trainer Workout featuresE-Bike ANT+ LEV incl. Shimano Steps, assist mode/level, shifting, batt., range & rear gear positionRadar System support, light sensor, 36 hr battery, BLE 5.0, Electronic Shifting, & GNSS SatelliteClimb Challenge , Reach New Heights - Climb to new heights with the Climb Challenge feature. When approaching a climb, the Rider S800 will change to the Climb Section page, providing an overview of a route's climb segments. The Climb Challenge screen also features a graphical summary with multiple climbs, vivid colour climb segments, distance, altitude & ascent, and start & end points, providing easy access and ride information at-a-glance.Climb Data & Alert - After configuring a route with Climb Challenge, you can view upcoming climbs, distance to climb start/end, current/starting/ending elevation, elevation countdown, remaining distance, grade, altitude and more right from the Rider S800 Climb page! Moreover, while following a route and approaching a climb, the Rider S800 by default will automatically switch between the Meter and Climb pages to prepare for the upcoming elevation change.Customize Your Climb - When creating or importing a route, the Bryton Active app will automatically generate climb data for your Bryton, Strava, Komoot, or any other 3rd party routes imported into the app, creating a Climb-Challenge compatible ride for the Rider S800. After reviewing the ride, you can choose to further customize these climbs by adjusting the total quantity, range of climbs, start/end points, and more via the Bryton Active app!Cycling Dynamics - Featuring Cycling Dynamics support, power training, and power data analysis has been taken to the next level. After pairing compatible power meter pedals, the Rider S800 can display both static and graphical data on meter pages, including seated/standing position, power phase (PP), platform centre offset (PCO), and right/left balance all on the Rider S800 s large, dynamic display.Power Phase - Identify where you generate the most torque and take your workouts to the next level! With a compatible power meter pedal system connected, determine the angle and location where your concentration of power is produced as well as the differences between left and right leg output. Enhance your workouts with better visualization of your pedal strokes.Platform Centre Offset - Using Platform Centre Offset (PCO) data to better measure how the force is distributed across the pedal platform during the pedal stroke relative to centre, you can achieve an improved centre of symmetry, helping you determine the optimal cleat position, maximum efficiency area and the ideal bike configuration.Seated/Standing Position - As your riding position fluctuates throughout the duration of a ride, evaluating your seated or standing position status makes it possible to accurately identify your position preferences during climbs and sprints with the comparative forces applied to the pedals. The Rider S800 helps to display your current position and how long/often you have been in this position along your real-time power data. By analysing your unique rider position metric, you can determine the effectiveness of each position, learn how each position affects your power output, and establish your tendencies under certain conditions.Group Ride - The Rider S800 is even more fun with friends! Using the Bryton Active app, select your track, invite your friends and see live updates for other riders on your route right from your device. Keep in touch, cheer on your friends or send status updates to others by sending customizable messages directly from the Rider S800. Additionally, with the Bryton Active app, setting up a group ride is as easy as a press of a buttonGroup Chat - Need to get a message out to the group, let someone know about a stop or just want to cheer on another rider With the Rider S800 or Bryton Active app, you can quickly and safely send messages to other riders while on a group ride with the Group Chat feature. Personalize your default messages on the Bryton Active app to send quick replies right from your device or type a custom message on the app at your next stop. Additionally, using voice input, you can create custom hands-free messages while on the road.Live Track - Share your real-time location with friends and family using the new Bryton Live Track feature. Simply generate a share link right from your phone and share with any messaging app with the press of a button. With the Live Track link, anyone can follow along from the web and view not only your real-time location, but also your current speed, ride time, trip time, distance, and last updated time!Advanced Workout Features - With a new graphical workout overview with zoom support and advanced new features, including real-time intensity adjustment, TrainingPeaks support, a new resilience workout mode, and workout note features (to add notes from the Bryton Active app or TrainingPeaks), training on the Rider S800 just got even better! View remaining workout progress, customizable power zones on the target power page, and more, all with vivid graphical representation!Indoor Smart Trainer - Boasting powerful new features and with a wide range of integrations, the Rider S800 brings the thrill of the ride to your home smart trainer! With ANT+ FE-C Smart Trainer compatibility, the Bryton Rider S800 can communicate with your indoor Smart Trainer to control resistance or power (target resistance/power), simulate custom virtual workouts (Smart Workout) or even simulate a route (Virtual Ride).Virtual Ride - Experience endless possibilities from the comfort of home with Virtual Ride Simulation. Utilizing ANT+ FE-C compatibility, the Rider S800 will work seamlessly with most smart trainers and can simulate recorded tracks from the Bryton Active App. These converted tracks can simulate different gradients which better emulate the on-road experience.Smart Workout - Easily create custom virtual workouts for smart trainers with the Rider S800 at home! Training plans can be built with the Bryton Active App and downloaded directly to the device. With ANT+ FE-C support, the Rider S800 will communicate with your smart trainer to simulate the resistance from the training plan.Turn-By-Turn Navigation - Whether you are exploring new regions or following a downloaded route, the Rider S800 is the perfect riding companion, providing turn-by-turn navigation and advanced guidance data, including street names (when connected to Bryton Active), POI s & Peaks (customizable in Bryton Active), distance and direction information, and more all on pre-downloaded regional OSM (OpenStreetMaps) maps.Voice Search - The Bryton Rider S800 speaks your language! With a connection to the internet, the Rider S800 eliminates the need for on-screen keyboards by providing Google voice search which is available in over 100 languages, offering a quicker, more intuitive, and all-around better way to search addresses or POIs while riding on the road, adventuring on the trail, or anywhere you find yourself!Auto-Rerouting - Wrong turn No problem! The Rider S800 helps you to always keep you on course with auto-rerouting. While connected to the Bryton Active app, the Rider S800 will automatically reroute your course if a different path is taken, and if the connection is lost, the Rider S800 will point you in the right direction to get you back on track!Navigation Back to Start - After a prolonged or complicated ride, effortlessly identify the fastest way back to where you started. The Rider S800 will use your current location to determine the most direct path and generate detailed turn-by-turn directions for your return journey.Ambient Light Sensor - Using the built-in ambient light sensor, the Bryton Rider S800 can automatically adjust its backlight based on the lighting conditions around it. When passing through a tunnel, under trees, etc., the backlight will automatically become brighter to compensate, ensuring optimal screen settings anywhere and anytime you ride!Extra-Large Crisp MIP Display - Designed with a 3.4'' large display, the Rider S800 utilizes MIP (Memory In Pixel) technology coupled with an internal reflection layer to be optimized for a better outdoor viewing experience without screen shadow. The extra-wide MIP display with ultra-narrow bezel offers both crisp, high-contrast readability and a high screen ratio, making this GPS cycle computer Bryton s premiere device with clarity without compromise!36 Hours of Battery Life - Equipped with an enormous 36 hours battery, the Rider S800 has the strength and stamina to take on any challenge.
If you’re looking for a fully-featured, simple to use GPS bike computer, then look no further than the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider 420 will pair with all major electronic shifting systems from Shimano Di2, SRAM eTap/AXS & Campagnolo EPS to clearly show gearing information and battery life too. Precise Global Navigation Satellite System (GNSS) Support Packed full of features including an advanced, high-quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply pairing with the Bryton Active app and make changes in layout instantly. With the full Global Navigation Satellite System (GNSS) support, the Rider 420 will work wherever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider 420. The Rider 420H bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor in the box. Features: Supports up to 80+ functions 35 hours of battery life 2.3 Inch Mono LCD (Optical Clear Adhesive Bonding) Smart Notifications (SMS, Calls & Email) Supports Full GNSS (Global Satellites) BLE smart 5.0 (for quick and easy data transfer) Built in barometer for accurate altitude Auto Altitude Calibration by GPS ANT+/BLE dual band support for all sensors Pedal Power Meter compatible Heart Rate & Powermeter zones Electronic Shifting support ANT+ FE-C Smart Indoor Trainer support Workouts Planning, TrainingPeaks Workout Auto Sync Track & Turn-by-turn Navigation Distance to next POI Indication Automatic upload to STRAVA / / Relive /TrainingPeaks / Selfloops via Auto Sync In the Box: Rider 420 Main Unit ANT+/BLE Smart Heart Rate Monitor USB Cable Bike Mount Safety Lanyard Quick Start Guide Technologies: Simply Precise: Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3” high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry-free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go! Crystal Clear Display: Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3” large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Lead the Way: Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way. Stay Motivated with POI/Peak Info: Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way. ANT+/ BLE Sensors Support: Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. Absolute Precision: The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Supports Up to 80+ Functions: Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. 35 Hours of Battery Life: The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording. TrainingPeaks Workout Support: To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks®. Workouts can be planned on TrainingPeaks® and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. ESS Support: Electronic gear-shifting systems including Shimano’s Di2, SRAM’s eTap and Campagnolo’s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette. Smart Trainer Compatibility: With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer. Power Meter Pedal Support: The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals. Smart Notifications: Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Customizable Data Display via App: Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Sync to Bryton Active App: Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With a simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks, Selfloops and Relive with Auto Sync: Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.
Display, track and share, all included in a small package. The all-new Bryton Rider 15 Neo GPS Bike Computer is super easy to setup. Just enjoy your ride and it will keep track of all your ride information for you. With its clear easy to read screen and its simple, Fast & Easy setup, the new Rider 15 Neo is quick & effortless to use. Just put it on your bike and ride! Strava, Relive and TrainingPeaks Cycle App Compatible You can also pair a Bluetooth Speed, Cadence or Heart Rate strap to the device to give you all the extra fitness information you might want on your journey. With the Bryton Rider15 Neo, you can easily share your ride quickly with your favourite app, like Strava, Relive or TrainingPeaks. The Rider 15 Neo C bundle comes packaged with a Bluetooth/ANT+ Cadence sensor in the box. Features: Supports up to 22+ functions Up to 16 hours of battery life 2 Inch Segment Type HTN LCD Satellite System: GPS/Galileo/QZSS Smart Notifications (SMS, Calls & Emails) 1-sec Recording Mode BLE smart 5.0 for sensor connections to Speed, Cadence & HRM Built-in barometer for accurate altitude readings Auto Altitude Calibration by GPS Compatible with Bryton Active App via Bluetooth (iOS and Android) In-app Data Grid Setting STRAVA / Relive Auto Sync Waterproof: IPX7 Log History: 120 hours Physical Dimensions: 46.1 x 71.1 x 21.6 mm Operating Temperature: -10°C - 60°C Mount compatibility: Proprietary Bryton Mount System (third-party mounts are not covered under warranty). In the Box Rider 15 Neo Main Unit Bluetooth/ANT+ Cadence Sensor USB Cable Bike Mount Quick Start Guide Technologies: Twist Click Go: Rider 15 neo comes with a clear 2“ screen and 3 intuitive buttons, as well as improved software, more than 21 functions, and an orientation mode for displaying which direction the rider is going. Larger, Enhanced Display: Utilizing a large 2“ display, the Rider 15 neo makes it even clearer to see speed data on the enlarged data grid. The high-quality display provides crystal-clear reading from any angle and environment without interference. Absolute Precision: Featuring Global Navigation Satellite System (GNSS) support, the Rider 15 neo accommodates more expansive coverage and dexterity in any type of geography, including substantial tree & building cover or in the mountains, as well as providing a wider variety of regions by incorporating GPS (USA), Galileo (EUR) and QZSS (Japan) satellites. Powerful Battery: Equipped with a powerful 16-hour battery and on-the-go power bank charging support, the Rider 15 neo helps you to take on any distance or peak! Supports Up to 21 Functions: Backed up by 21 features, this device supports rich data for accurately gauging the performance of each ride which can be viewed in post-workout analysis from the Bryton Active companion App (available for iOS and Android). Also, the Rider 15 neo integrates BLE Speed, Cadence and Heart Rate sensors including 3rd party sensors after effortless pairing. Smart Notifications: See phone notifications, including calls, texts and emails, right on the Rider 15 neo after easy setup with the Bryton Active App via BLE (available for iOS and Android), This powerful feature helps to make the Rider 15 neo the definitive smart cycling companion for every Bryton user. Illuminate Your Rides: Night riding just got a lot more accurate! Equipped with a powerful built-in backlight, the Rider 15 neo’s high contrast screen can be brightly illuminated for riding in dimly lit areas or convenient night cycling. Additionally, this device is mix-and-matchable with any bike accessories and will not experience interference from other connected devices or LED lights. Customizable Data Display via App: Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Sync to Bryton Active App: Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With a simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks, Selfloops and Relive Auto Sync: Compete with worldwide riders through Rider 15 neo recorded data. Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites (so no software is needed to convert files). It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 15 neo supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis.
Bryton Rider 420E GPS Cycle ComputerThe Rider 420E GPS Cycle Computer from Bryton is the ultimate cycle computer for training, touring and road racing. It provides 35 hours battery life and over 80 functions while also being equipped with a clear, crisp and highly visible LCD screen. Plus, it's compatible with heart rate and cadence sensors, and integrates seamlessly with modern electronic drivetrains and your favourite cycling apps.Compatible with Shimano Di2, Campagnolo EPS and SRAM eTap AXSIf you're looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider 420 will pair with all major electronic shifting systems from Shimano Di2, SRAM eTap/AXS & Campagnolo EPS to clearly show gearing information and battery life too.Precise Global Navigation Satellite System (GNSS) SupportPacked full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full Global Navigation Satellite System (GNSS) support, the Rider 420 will work wherever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider 420.N.B. Sensors are not included, but available separately.Features: Supports up to 80+ functions 35 hours of battery life 2.3 Inch Mono LCD (Optical Clear Adhesive Bonding) Smart Notifications (SMS, Calls & Email) Supports Full GNSS (Global Satellites) BLE smart 5.0 (for quick and easy data transfer) Built in barometer for accurate altitude Auto Altitude Calibration by GPS ANT+/BLE dual band support for all sensors Pedal Power Meter compatible Heart Rate & Powermeter zones Electronic Shifting support ANT+ FE-C Smart Indoor Trainer support Workouts Planning, TrainingPeaks Workout Auto Sync Track & Turn-by-turn Navigation Distance to next POI Indication Automatic upload to STRAVA / / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box: Rider 420 Main Unit USB Cable Bike Mount Safety Lanyard Quick Start GuideTechnologies: Simply Precise: Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3” high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go! Crystal Clear Display: Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3” large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Lead the Way: Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way. Stay Motivated with POI/Peak Info: Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way. ANT+/ BLE Sensors Support: Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. Absolute Precision: The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Supports Up to 80+ Functions: Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. 35 Hours of Battery Life: The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording. TrainingPeaks Workout Support: To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks®. Workouts can be planned on TrainingPeaks® and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. ESS Support: Electronic gear-shifting systems including Shimano’s Di2, SRAM’s eTap and Campagnolo’s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette. Smart Trainer Compatibility: With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer. Power Meter Pedal Support: The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals. Smart Notifications: Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Customizable Data Display via App: Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Sync to Bryton Active App: Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks, Selfloops and Relive with Auto Sync: Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.Buy Bryton Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bryton Rider 420T GPS Cycle Computer BundleThe Rider 420T GPS Cycle Computer Bundle from Bryton offers up to 35 hours of battery life and provides over 80 functions and is encased in a durable and stylish body with a sharp and easy to read 2.3-inch screen. Plus, this version comes supplied with a Bluetooth/ANT+ compatible Heart Rate Monitor and Cadence sensor to help you get the most out of every cycling sessions.Compatible with Shimano Di2, Campagnolo EPS and SRAM eTap AXSIf you're looking for a fully featured, simple to use GPS bike computer, then look no further that the Rider 420. With its Bluetooth & ANT+ wireless connectivity, the Rider 420 will pair with all major electronic shifting systems from Shimano Di2, SRAM eTap/AXS & Campagnolo EPS to clearly show gearing information and battery life too.Precise Global Navigation Satellite System (GNSS) SupportPacked full of features including an advanced, high quality 3.2inch Mono LCD (Optically clear bonded screen), the Rider 420 will also help you train hard indoors with its ANT+ FE-C function allowing you to take control of your compatible indoor trainer. Change the screen layout by simply paring with the Bryton Active app and make changes in layout instantly. With the full Global Navigation Satellite System (GNSS) support, the Rider 420 will work wherever you take it, be that nationally or globally. Simple to set up is the follow the track / Turn by Turn navigation to help you find your way to or from your destination. Go anywhere, do anything all with the Rider 420.The Rider 420T bundle comes packaged with an additional Bluetooth/Ant+ Heart Rate Monitor & Cadence sensor in the box.Features: Supports up to 80+ functions 35 hours of battery life 2.3 Inch Mono LCD (Optical Clear Adhesive Bonding) Smart Notifications (SMS, Calls & Email) Supports Full GNSS (Global Satellites) BLE smart 5.0 (for quick and easy data transfer) Built in barometer for accurate altitude Auto Altitude Calibration by GPS ANT+/BLE dual band support for all sensors Pedal Power Meter compatible Heart Rate & Powermeter zones Electronic Shifting support ANT+ FE-C Smart Indoor Trainer support Workouts Planning, TrainingPeaks Workout Auto Sync Track & Turn-by-turn Navigation Distance to next POI Indication Automatic upload to STRAVA / / Relive /TrainingPeaks / Selfloops via Auto SyncIn the Box:Rider 420 Main UnitANT+/BLE Smart Heart Rate MonitorANT+/BLE Smart Cadence SensorUSB CableBike MountSafety LanyardQuick Start GuideTechnologies: Simply Precise: Engineered with Simplicity and Convenience at its core, in order to create the most enjoyable cycling experience, the Rider 420 is built with 2.3” high quality optically bonded display, producing a crystal-clear view from any angle. Its follow track function with turn-by-turn makes exploring unfamiliar areas worry free, and by incorporating Full Global Navigation Satellite System (GNSS) support, the Rider 420 enables a faster satellite fix and guarantees more precise positioning and recording. It also provides maximum compatibility by working perfectly with both ANT+ and BLE sensors, making the Rider 420 a simple and precise GPS Cycle computer that is easy as start-and-go! Crystal Clear Display: Designed to create the best viewing experience, the Rider 420 is built with crisp black and white 2.3” large screen. The high quality optically bonded display provides crystal-clear reading from any angle and environment without interference. By simply looking at the cycling page, which can fit up to 8 data per page, it is possible to fully understand your real-time performance. Lead the Way: Unleash your adventurous spirit with the Rider 420's Follow Track function! It is now possible to plan and create trips via the Bryton Active App, import trails(.gpx) from 3rd-party platforms onto Bryton Active, and auto sync trails from Strava, Komoot and Ride with GPS to let the Rider 420 be your personal guide. With turn by turn navigation, the device offers information for road names, distance and direction before every turn. Go ahead to explore new areas, Rider 420 will lead the way. Stay Motivated with POI/Peak Info: Knowing the distance to your next stop is always motivating and useful. After setting up your POI and Peak info, you can check the distance to your next POI or Peak in Follow Track mode, allowing you to make the right decision based on your status and stay motivated along the way. ANT+/ BLE Sensors Support: Aiming for the most convenience, both ANT+ and BLE sensors both work perfectly with the Rider 420 after simple pairing. Absolute Precision: The Rider 420 GPS cycling computer incorporates 5 different satellite systems: GPS, Glonass(Russia), BDS(China), Galileo(Europe)and QZSS(Japan), providing a faster start-up and a much more reliable satellite coverage in any situation, especially when covered by buildings/trees, or even riding in the mountains. Supports Up to 80+ Functions: Rider 420 provides rich data for accurately gauging the performance of each ride. It incorporates up to 80+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. 35 Hours of Battery Life: The Rider 420 is equipped with a powerful battery, ready to challenge any long-distance ride! It provides up to 35 hours of battery life and can be charged via power bank while recording. TrainingPeaks Workout Support: To make training easier than ever, Rider 420 now supports workout plans from TrainingPeaks®. Workouts can be planned on TrainingPeaks® and exported to the Rider 420 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. ESS Support: Electronic gear-shifting systems including Shimano’s Di2, SRAM’s eTap and Campagnolo’s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 420, eliminating the need to manually check the crankset and cassette. Smart Trainer Compatibility: With Bryton Active App's Advanced workout feature, customized trainings can be easily constructed for the Rider 420. Additionally the Rider 420 provides greater versatility and compatibility by supporting both ANT+FE-C Smart Trainer and TrainingPeaks workout sync, allowing trainings to be followed on a home Smart Trainer. Power Meter Pedal Support: The Rider 420 also caters to riders using power meter pedals. Simply input the crank length for calibration and receive precise power values generated from the power meter pedals. Smart Notifications: Never worry about missing important phone calls, emails or texts during rides again! Rider 420 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Customizable Data Display via App: Tailor the data display with the Bryton Active App! After pairing with Bryton Active App, data fields/pages can be customized based on training goals via BLE on your phone, and it's super easy to use! Sync to Bryton Active App: Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks, Selfloops and Relive with Auto Sync: Compete with worldwide riders through Rider 420 recorded data. The Rider 420 is compatible with popular 3rd party training sites such as STRAVA, TrainingPeaks and Selfloops. What's better is it also supports professional training applications, such as GoldenCheetah, for detailed post workout analysis.Buy Bryton Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.