Keep your helmet healthy and fresh with 7 iDP's replacement liners.
Perfect for those long days in the dirt. Built with a cotton/poly mix Coolmax fabric which is designed to regulate temperature and evaporate moisture so your skin is drier and less likely to experience chafing or blistering. Features: Coolmax Fabric 130mm rise to cover the ankle and lower calf Ribbed rise Cool mesh zone Re-enforced and contoured Y-heel Flexible mesh foot break
Adding a layer of protection to an area prone to bruising from chainrings and crashes the Control Ankle Protector keeps ankle bones covered to avoid injury. Once you've used them - you'll never want to ride without them. Simple but so so good! LIGHTWEIGHT Built from super-light foams and mesh the Control Ankle Protector covers the whole ankle to prevent injury from pedal strikes and slips towards chainrings. BREATHABLE MESH 4-way stretch mesh panel at the front allows free ankle movement with the side sections benefitting from two densities of foam protection. STIRRUP STRAP Slim elasticated stirrup strap keeps the support in place thin enough to go unnoticed.
The Youth Transition glove prioritises performance and dexterity as the top priority. The Transition is perfect for anyone looking to get the best feedback through their grips without sacrificing comfort. PULL ON DESIGN With low weight and a slim profile top of the list on the Youth Transition Gloves have a pull on design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock. PERFORATED PALM The perforated palm allows airflow keeping palms free from sweat build-up and hands fresh. SILICONE FINGER GRIP Our 7iDP logo along the end of the index finger keeps braking grip covered in all conditions.
7 Protection (7iDP) - Kids Transition Knee Pads Our super-light Kids Transition pads are designed for the little rippers out there that ride scoot or pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. KID SPECIFIC DESIGN Tested by kids for kids. Get protected by the same guys that keep Sam & Steve's knees in race-ready shape. BREATHABLE SOCK Running the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort.
7iDP Transition Glove The Transition glove is our lightest with performance and dexterity the top priority. The Transition is perfect for anyone looking to get the best feedback through their grips without sacrificing comfort. PULL-ON DESIGN With low weight and a slim profile top of the list on the Transition gloves a pull-on design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock. PERFORATED PALM The perforated palm allows airflow keeping palms free from sweat build-up and hands fresh.
Replacement liner for your 7iDP helmet Get yourself some spare cheek pads and liner or maybe you need to fine-tune the fit of your Project.23. ABS Liner Thickness XS – 8mm (Can also be used to replace a S (6mm) liner to tighten the area around the top of the head) S – 6mm (Can also be used to replace an XS (8mm) liner to loosen the area around the top of the head) M – 8mm (Can also be used to replace a L (6mm) liner to tighten the area around the top of the head) L – 6mm (Can also be used to replace a M (8mm) liner to loosen the area around the top of the head) XL – 8mm (Can also be used to replace an XXL (6mm) liner to tighten the area around the top of the head) XXL – 6mm (Can also be used to replace an XL (8mm) liner to loosen the area around the top of the head
7iDP Control Gloves are well vented and lightweight. The minimal ventilated fabric is perfect for warmer days or riders who prefer less 'glove' between them and the bike.
The 7iDP Project glove is a no-compromise mountain bike specific glove designed for racing and ride performance. Features: Knuckle insert to protect your two outside fingers from trees and shrub impacts AX 4 way stretch perforated palm Ripstop 4 way stretch back of hand fabric Adjustable cuff closure Moisture-wicking Microfibre thumb panel Silicone printed finger and thumb for added grip on gear shifters and brake levers One-piece Neoprene cuff adds protection and comfort with ease of adjustment
7iDP Chill Gloves are designed to keep your hands warm through winter. Microfleece keeps the heat in while a Clarino palm gives ensures good contact and feel in the wet and dry. Features: Microfleece backed neoprene main back of hand fabric Clarino palm Reflective graphics on the back of the hand One Piece Neoprene Cuff adds a warm sealed cuff for cold days - Adjustable cuff closure Moisture-wicking Microfibre thumb panel Silicone printed finger and thumb for added grip on gear shifters and brake levers Touch Screen compatible fingertips.
The M5 enters the 7iDP range with a focus on riders looking for a helmet that can do it all. Plenty of coverage for the back of the head and a custom peak comes on this entry-level helmet in 5 fresh colours and graphics.Deep rear head coverage14 vents for coolingCustom 7iDP visorOne hand dial adjust fitRapid adjust chin strap5 Colours and 2 sizesComplies to CE standards(S/M, L/XL)
The M5 enters the 7iDP range with a focus on riders looking for a helmet that can do it all. Plenty of coverage for the back of the head and a custom peak comes on this entry-level helmet in 5 fresh colours and graphics.Deep rear head coverage14 vents for coolingCustom 7iDP visorOne hand dial adjust fitRapid adjust chin strap5 Colours and 2 sizesComplies to CE standards(S/M, L/XL)
The M5 enters the 7iDP range with a focus on riders looking for a helmet that can do it all. Plenty of coverage for the back of the head and a custom peak comes on this entry-level helmet in 5 fresh colours and graphics.Deep rear head coverage14 vents for coolingCustom 7iDP visorOne hand dial adjust fitRapid adjust chin strap5 Colours and 2 sizesComplies to CE standards(S/M, L/XL)
The M5 enters the 7iDP range with a focus on riders looking for a helmet that can do it all. Plenty of coverage for the back of the head and a custom peak comes on this entry-level helmet in 5 fresh colours and graphics.Deep rear head coverage14 vents for coolingCustom 7iDP visorOne hand dial adjust fitRapid adjust chin strap5 Colours and 2 sizesComplies to CE standards(S/M, L/XL)
7 iDP's super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. SUPER LIGHT Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. COMPRESSION FIT Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. BREATHABLE The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up.
As bikes become more capable and trail riding gets faster the M2 slots into the current generation of open face protection. Conehead technology utilises dual-density foam to dissipate impacts more effectively giving you a safer ride.Open face all mountain design19 vents for coolingConeHead Technology utilising dual-density foams in impact-absorbing zonesFull rear head coverageCustom 7iDP liner for superior fit and comfortCustom 7iDP adjustable visorThe Boa Fit SystemRapid adjust chin strapAvailable in 4 colours and 3 sizesComplies to CE, CPSC, AS STANDARDSSizes XS/S, M/L, XL/XXLThe Boa Fit System delivers a connected, fast, customized and durable fit, purpose-built for performance. Boa s patented system consists of three integral parts: a micro-adjustable dial, a super-strong lightweight lace, and low friction lace guides and is backed by the Boa Guarantee.
As bikes become more capable and trail riding gets faster the M2 slots into the current generation of open face protection. Conehead technology utilises dual-density foam to dissipate impacts more effectively giving you a safer ride.Open face all mountain design19 vents for coolingConeHead Technology utilising dual-density foams in impact-absorbing zonesFull rear head coverageCustom 7iDP liner for superior fit and comfortCustom 7iDP adjustable visorThe Boa Fit SystemRapid adjust chin strapAvailable in 4 colours and 3 sizesComplies to CE, CPSC, AS STANDARDSSizes XS/S, M/L, XL/XXLThe Boa Fit System delivers a connected, fast, customized and durable fit, purpose-built for performance. Boa s patented system consists of three integral parts: a micro-adjustable dial, a super-strong lightweight lace, and low friction lace guides and is backed by the Boa Guarantee.
As bikes become more capable and trail riding gets faster the M2 slots into the current generation of open face protection. Conehead technology utilises dual-density foam to dissipate impacts more effectively giving you a safer ride.Open face all mountain design19 vents for coolingConeHead Technology utilising dual-density foams in impact-absorbing zonesFull rear head coverageCustom 7iDP liner for superior fit and comfortCustom 7iDP adjustable visorThe Boa Fit SystemRapid adjust chin strapAvailable in 4 colours and 3 sizesComplies to CE, CPSC, AS STANDARDSSizes XS/S, M/L, XL/XXLThe Boa Fit System delivers a connected, fast, customized and durable fit, purpose-built for performance. Boa s patented system consists of three integral parts: a micro-adjustable dial, a super-strong lightweight lace, and low friction lace guides and is backed by the Boa Guarantee.
7 iDP's mid-level protection Elbow super contoured for a slim and streamlined fit - the transition will protect you when the going gets tough. BENCHMARK The 7iDP Transition Knee and Elbow have become the go-to 'benchmark' for CE Certified limb protection: flexible slim and light yet offering Level 2 protection which stays in place. What more do you need? COMPRESSION FIT Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. BREATHABLE The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up.
7 Protection (7iDP) - Flex Elbow Pads The Flex elbow/youth knee pads are for any rider needing complete coverage with confidence-inspiring protection. DUAL PURPOSE HARDSHELL PROTECTION The Flex Elbow also doubles as a youth Knee - an accident that happened whilst at Interbike when a number of customers tried on our Youth Flex knee - believing it to be an elbow pad! They all loved it - so we elected to test it ourselves refine it and to offer a full-size range as both an adult Elbow and Youth Knee. CENTRE + FOREARM STRAP Our centre strap applies tension from both sides giving a comfortable and consistent fit on the upper arm / lower thigh and a second strap sitting above the forearm/calf muscle means everything stays where it should. OPEN BACK DESIGN Maintaining airflow and reducing any sweat build-up is a key feature for pads. The Flex pads have an open back section to allow sweat to evaporate away. CAP + FOAM PROTECTION Two layers of protection covered by a tough outer fabric make for a flexible and hardwearing pad. Shaped to fit in a riding position. You will forget the pads are there.