The new Transition knee slip on knee pad gives low profile protection that protects and can be packed up small to stow away in backpacks or even jersey pockets. Minimal Protection at its best.Key Features: Rollable and stowable size,Low weight, high strength flexible 1mm cap for superior fit and leg movement,Double layer custom foam to increase air flow and reduce weight,Compression fit,A combination of Poly/Spandex and 4 way stretch mesh give great fit and ventilation,Designed beyond CE EN 1621/1 standard to ensure maximum protection,Sizes – S/M/L/XL.
If you've ever been 'bitten' by your chain rings or pedals you'll know the value of a good ankle support.Features: Multi density foam to protect ankle bone,Stirrup strap to secure ankle pad in place,Rear padding to prevent injury from pedal hits,4-Way stretch mesh for breathabilty and ventilation,Available only as individual support,Sizes - S/M-L/XL.
Compact Compression fit pack away elbow protection with removable sections.Features: Removable foams and knee cap for washing,Low weight, high strength flexible 1mm cap for superior fit and arm movement,Double layer custom foam to increase air flow and reduce weight,Compression fit, designed to be packable for out on the trail,A combination of Poly/Spandex and 4 way stretch mesh give great fit and ventilation,Designed beyond CE EN 1621/1 standard to ensure maximum protection,Sizes - S/M/L/XL.
The versatile design of the Flex Shorts has 'pockets' of proprietary foam/ Curv® protection which are individually removable for when protection is not required or for washing. The rear yoke foam is de-bossed to give Coccyx protection. A combination of Poly/Spandex and 4 way stretch mesh offers great airflow to keep the rider cool.Features: Flexible Curv® removable side panels,Low weight high strength 1mm flexible panels for a contoured fit,Features removable polygon perforated foam and Curv® plastic on hip and legs for easy washing,Double layer polygon perforated custom foam to increase air flow and reduce weight,A combination of Poly/Spandex and 4 way stretch mesh offer great air flow,Designed beyond CE EN1621/1 standards to ensure maximum protection,Jaquard knit wide elastic waistband,Debossed rear yolk to protect cocyx,Compression fit with fly,Sizes - S/M/L/XL.
The 7 iDP Flex Body Protector offers customisable protection with the option to carry a bladder in place of the spine protector. It features all the pockets you'll ever need in easy access positions and compression fit so it can be worn under a jersey.Key Features:Lightweight, flexible protection that hardens on impact.Removable spine and shoulder protection for customised fit.Spine protection pocket sized to fit 2 litre hydration bladder.Fixed chest pad.4 Angled rear pockets for easy access plus one centre pocket.Poly-spandex 4 way stretch mesh is lightweight and provides great ventilation.Certification: EN1621-2: 2012.
New for 2015 the Flex knee offers excellent value for money. It features most of the innovation but at a lower price. Competitive pricing make this a go to pad for any rider.Features: Hardwearing, durable Nylon SPandex knee cover.,Double layer polygon perforated custom foam to increase air flow and reduce weight,Upper calf muscle adjustable strap to prevent pad from slipping,Center adjustment strap gives even tension above calf muscle and around top of pad,One Piece foam section covers front and sides of knee with a Plastic cap,Custom iDP polygon neoprene is light and offers great ventilation,Designed beyond CE EN 1621/1 standards to ensure maximum protection,Sizes - S/M/L/XL.
Key Features:Chill insulated winter gloves with reflective logos..
The Transition is our lightest glove. Performance and dexterity the top priority. With low weight and a slim profile top of the list on the Transition gloves, a pull-on design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock.The perforated palm allows airflow keeping palms free from sweat build-up and hands fresh.
The Transition glove is our lightest with performance and dexterity the top priority. A favourite of downhill racer Adam Brayton the Transition is perfect for anyone looking to get the best feedback through their grips without sacrificing comfort.Key Features:Pull-On DesignWith low weight and a slim profile top of the list on the Transition gloves, a pull on the design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock.Perforated PalmThe perforated palm allows airflow keeping palms free from sweat build up and hands fresh.Silicone Finger GripOur SevenIDP logo along the end of the index finger keeps braking grip covered in all conditions.
The 7iDP Project glove is a no-compromise, mountain bike specific glove designed for racing and ride performance.Features: Knuckle insert to protect your two outside fingers from trees and shrub impacts,AX 4 way stretch perforated palm,Ripstop 4 way stretch back of hand fabric,Adjustable cuff closure,Moisture-wicking Microfibre thumb panel ,Silicone printed finger and thumb for added grip on gear shifters and brake levers,One-piece Neoprene cuff adds protection and comfort with ease of adjustment.
7iDP Control Gloves are well vented and lightweight. The minimal, ventilated fabric is perfect for warmer days or riders who prefer less 'glove' between them and the bike.
The Transition glove is our lightest, with performance and dexterity the top priority. The Transition is perfect for anyone looking to get the best feedback through their grips without sacrificing comfort.Pull-On DesignWith low weight and a slim profile top of the list on the Transition gloves, a pull-on design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock.Perforated PalmThe perforated palm allows airflow keeping palms free from sweat build-up and hands fresh.Silicone Finger Grip
Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012.Key Features:Super Light/super Thin!At just 6mm the Sam Hill Lite Pads are the thinnest CE EN 1621-1:2012 certified pads on the market.Ideal for trail riding or wearing under your race pants the Sam Hill Lites offer comfortable, breathable protection in a super light package.Compression FitDesigned to keep weight down the compression fit, slip on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down.Breathable SockCompression square line Ripstop Spandex fabric allows for a durable lightweight feel along with great air flow.
The Project Lite knee pads are for racers and riders looking for extra-lightweight, hard shell protection. Our innovative compression fit knit sock and flexible hardshell give the Project Lite knee just the right amount of protection and secure fit.Unique Pro Knit ChassisA trail riding /minimal version of the Eurobike Award Winning Project Knee.Super thin – ideal for riders looking for trail ride protection or minimal weight/bulk for racing, our protection pad is just 6 mm thick. Combine this with our Pro Knit compression fit knee sock and you can start to understand why the Project series is the most advanced knee pad series on the market.Pedal Flex MobilitySpeed is the priority for racing, to gain that speed, efficient pedalling is key. The Project Lite knee uses a knitted, breathable sock to keep the rider cool and add to the comfort of a compression fit pad.Flexible Hard CapA hard yet flexible micro injected outer cap provides the best fit while dispersing forces in a crash. Designed to slide over rather than grip any surface a rider meets at flat out race speeds.
The Flex elbow/youth knee pads are for any rider needing complete coverage with confidence inspiring protection. Constructed in the same way our adult Flex Knee pads with an open back and dual layer protection the Flex has you covered.Key Features:Centre + Forearm StrapOur centre strap applies tension from both sides giving a comfortable and consistent fit on the upper arm / lower thigh and a second strap sitting above the forearm/calf muscle means everything stays where it should.Open Back DesignMaintaining airflow and reducing any sweat build up is a key feature for pads. The Flex pads have an open back section to allow sweat to evaporate away.Cap + Foam ProtectionTwo layers of protection covered by a tough outer fabric make for a flexible and hardwearing pad. Shaped to fit in a riding position. You will forget the pads are there.Technical Details:Tested beyond CE/ EN 1621/1,Centre strap compression keeps the Flex Elbow in place all day.,As with the Flex Knee, the elbow version shares the cap and foam combination to give maximum protection as well as being faced with abrasion resistant material.,An upper forearm strap holds the Flex Elbow pads in place and the 4-way stretch mesh and an open design give superb air flow..
The Kids Transitions feature a simple slip on fit and heat moulding foam.Our super light Kids Transition pads are designed for the little rippers out there that ride scoot bikes to pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.Key Features:SUPER LIGHTWithout compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super light package.COMPRESSION FITDesigned to keep weight down the compression fit, the slip-on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down.BREATHABLE SOCKRunning the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort.
Get yourself some spare cheek pads and liner or maybe you need to fine-tune the fit of your Project.23. ABS Liner ThicknessXS – 8mm (Can also be used to replace a S (6mm) liner to tighten the area around the top of the head)S – 6mm (Can also be used to replace an XS (8mm) liner to loosen the area around the top of the head)M – 8mm (Can also be used to replace a L (6mm) liner to tighten the area around the top of the head)L – 6mm (Can also be used to replace a M (8mm) liner to loosen the area around the top of the head)XL – 8mm (Can also be used to replace an XXL (6mm) liner to tighten the area around the top of the head)XXL – 6mm (Can also be used to replace an XL (8mm) liner to loosen the area around the top of the head)
Whether you’re racing, lapping a bike park, or hitting your local trails, the Project.23 Glass Fibre will keep you protected and comfortable. The Fiberglass shell offers shock absorbency and incredible value for money while the 23 big bore vents for no compromise airflow will keep you cool. Best of all, the Project.23 Glass Fibre uses our S.E.R.T (Seven Energy Reduction Technology) slip-plane system.Manages impact energy that can be transmitted to the brain in the event of a crash,Provides rotational force management,Overall focus is on energy transmission management.Developed at our Prolab facility on Vancouver Island, our Project Line is the result of endless hours spent designing, developing and testing in some of the harshest and most demanding MTB riding spots on the planet. We’ve tested all Project lines to destruction and are confident that they’ll provide you with the reassurance that when you do have a big spill – we have you covered.Key Features:23 big bore vents for no compromise airflow,S.E.R.T slip plane system reduces impacts causing C.T.E,The most ventilated full-face hardshell helmet on the market,Fibreglass shell offering shock absorbency and incredible value for the money,CRV (Crash Release Visor) system allows the visor to release on impact to help reduce rotational forces,Easy position visor angle no bolts needed,Injection-molded branded trim to protect fibreglass helmet shell,AGION anti-microbial liner helps to keep things smelling fresh,TF (Through Flow) Goggle ventilation allows full airflow,Quick-release liner for easy washing and cleaning,Supplied with P.23 custom drawstring bag,Fidlock magnetic closure,Sizes XS, S, M, L, XL, XXL (size large weight 1010g).
Industry leading full face protection for days in the park or taking on the clockWhether you’re racing, getting laps at the bike park or hitting your local trails the Project 23 Carbon will keep you protected and comfortable. The carbon fiber shell offers shock absorbency and incredible value for money while the 23 big bore vents for no compromise air flow will keep you cool. Best of all, the Project 23 Carbon uses our S.E.R.T (Seven Energy Reduction Technology) slip plane system.Key Features:S.E.R.T slip plane system reduces impacts causing C.T.E,The most ventilated full face hard shell helmet on the market,Carbon shell using our Project lab layering process to reduce weight as much as possible,Easy position visor angle no bolts needed,Injection molded branded trim to protect carbon helmet shell,AGION anti-microbial liner helps to keep things smelling fresh,TF (Through Flow) Goggle ventilation allows full air flow,Quick release liner for easy washing and cleaning,Supplied with padded pro helmet bag,Sizes XS, S, M, L, XL, XXL (size large weight 922g).S.E.R.T Features:Manages impact energy that can be transmitted to the brain in the event of a crash,Provides rotational force management,Overall focus is on energy transmission management.Developed at our Prolab facility on Vancouver Island, our Project Line is the result of endless hours spent designing, developing and testing in some of the harshest and most demanding MTB riding spots on the planet. We’ve tested all Project lines to destruction and are confident that they’ll provide you with the reassurance that when you do have a big spill – we have you covered.
Designed with valuable feedback from the legend himself, the new Sam Hill signature knee pad is the ultimate knee pads for gravity riding whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2.Key Features:Super LightDesigned by 3 x UCI World DH Champion, 2 xEWS World Champion Sam Hill it’s no surprise that the Sam Hill knee pads are proving so popular. Fully certified to CE EN1621:2012 Level 2 the Sam Hill pads offer comfortable protection in a super light package. Winner winner chicken dinner!Compression FitDesigned to keep weight down the compression fit, slip on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down.Breathable SockRunning the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort.