3T compact-cockpit design leaves 285 mm total width to either side of stem bulge to mount lock-out levers, cameras, and lights as well as grips, shifters, and brake levers. Bar can be cut down to 680 mm width if required. Flat 740 Team is built in carbon-fiber and weighs 182 g (uncut).
3T Exsero Team Stealth Riser Carbon HandlebarsDeveloped for the rigours of modern MTB trail riding and beyond, this riser handlebar is fully equipped for long days on your favourite mountain route. Benefitting from a high-quality carbon fibre build, this model offers the best combination of stiffness, durability and low weight performance as you weave from trail to trail. Another highlight of its carbon layup is its hard-wearing design that's tough enough to handle all that the trail can throw at it without adding any unnecessary weight to your mountain bike. At 700mm wide with a nine degree rise, this is a perfect choice for smooth, comfortable and dependable steering as you carve your way around the mountain.Features: Material: Carbon Use: Mountain Bike (MTB) Diameter: 31.8mm Width: 700mm Rise: 9 degreesBuy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Developed for the rigours of modern MTB trail riding and beyond, this riser handlebar is fully equipped for long days on your favourite mountain route. Benefitting from a high-quality carbon fibre build, this model offers the best combination of stiffness, durability and low weight performance as you weave from trail to trail. Another highlight of its carbon layup is its hard-wearing design that's tough enough to handle all that the trail can throw at it without adding any unnecessary weight to your mountain bike. At 700mm wide with a nine degree rise, this is a perfect choice for smooth, comfortable and dependable steering as you carve your way around the mountain. Please note: The image is for demonstration purposes, this model has a 9 degree rise.
Arx II is an evolution of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. Its a subtle refresh of this classic design. The faceplate is drawn in tighter at top and bottom, for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, in place of the twin M5 bolts used previously. Bolts are now the more-secure Torx-type fitment in place of the Allen bolts used previously.Technical Specifications:Weight: 135g (110mm).Length: 70, 80, 90, 100, 110, 120, 130mm.Steerer: 1-1/8" Ø.Material: AL 2010.Clamp Diameter: Ø 31.8 (+ 0.1 – 0.0.5).Angle: ±6°, ±17°.Bolts: Torx T25.Finish: Shot Peened/Black Anodized.Stack: 40mm.Certification: CEN.
The Rotundo Team Stealth bar is a traditional, medium-deep bar that riders still love today thanks to its classic pattern and its control, handling, & versatility. The carbon build guarantees a rigid and responsive experience, even under the highest speeds and harshest racing pressures. The 139mm drops and oval-shaped centre section ensure a comfortable, ergonomic feel when taking up a tall or low riding position, with the unidirectional matte black finish adding an extra layer of protection and durability to this reliable, high-performance road bar.
With a flip-flop design that allows you to fit the stem either way for a more upright seating position, this Pro model is aluminium-made to stay durable and strong through the hardest of rides. With a four-bolt, detachable clamp design, your bar is held securely in place without compromising manoeuvrability, adding further strength to your cockpit. Designed to protect composite-made bars from stresses and impacts, it is sized to fit most common bars and steerers, making it a versatile choice for the avid rider.
Steerers and handlebars made of composite materials can easily be compromised by poor clamp design. To assure the integrity of the ARX clamp interface, we perform our own tests that go way beyond the demands of CEN standards. We even tested this new stem’s compatibility with other brands of handlebars and it passed with flying colours. ARX PRO is made of Al 2010 and has stainless-steel bolts. PRO offers an ideal balance to riders who insist on top-class performance at the keenest price. This group typically includes many amateurs who purchase their own equipment. PRO components often employ traditional materials such as Al 7075 and Al 6061 alloys to contain fabrication costs. But like all 3T products, they benefit from the 3T Intelligent Production Lifecycle, assuring right-first-time design and quality, at prices that meet the needs of today’s discriminating bike riders. Count on PRO components to perform to the highest levels.
Making the most of its strong aluminium build to keep you steering with precision on every ride, it features a flip-flop design for low, aggressive riding and can be reversed to give a taller position for more upright riding. With an impressive strength-to-weight ratio, it performs brilliantly across the most challenging routes, letting you manoeuvre your steering column with absolute ease from start to finish.
Specifically developed for road cycling, this high-quality stem is equipped with a tough 6061 alloy construction that provides a strong and secure connection between your handlebar and your fork's steerer tube. 3T has also kitted out this version with double bolts on its steerer clamp for a dependable hold with extra safety. Another highlight is its reverse faceplate bolts, which give the faceplate a more elegant design. Coming complete with a stealth black finish and the classic 3T rubber logo on the front, this is a lightweight upgrade for holding your steering set-up together as you clock up the miles. A stem may not seem to be the most exciting bike part, but it is in 3T's DNA to care about it in great detail. After all, no other part has such a big effect on your riding position and thus your speed, comfort and enjoyment. With the APTO, 60 years of innovation and elegance in 3T stem design come together in a moving sculpture. Technologies: Steerer Clamp: Double bolts hold the steerer securely and provide redundancy for extra safety. Reverse Faceplate Bolts: These clean up the faceplate for a more elegant design, in particular in combination with 3T's drop bars. Classic Rubber Logo: The 3D rubber logo is a nod to the iconic 3T stems of yesteryear. Bar Fly Compatible: The Apto Stealth stem is compatible with the Bar Fly Race Direct GPS mount. Manufacturer's Part Numbers: 8700DBAC95W Black 70mm 8700DBAD95W Black 80mm 8700DBAE95W Black 90mm 8700DBAF95W Black 100mm 8700DBAG95W Black 110mm 8700DBAH95W Black 120mm 8700DBAI95W Black 130mm
This road bike aerobar comes as a complete set that includes a basebar, aero extensions, cradle, pads and instruction manual. Its basebar and extensions are made from a high-quality 7075 alloy construction that's strong and dependable, making it more than capable of handling all of the intensity associated with racing. 3T has also equipped this model with a shot-peened and anodised finish for an extra level of durability as well as protection against corrosion during wetter riding conditions. Another highlight is its S-bend aero extensions and comfortable neoprene pads that offer a wide range of positioning, so you can easily get into your aero position when putting the power down. Coming complete with internal cable routing, it also makes it simple to hide away your cables and benefit from a sleek appearance. Ideal for road, triathlon and time trial (TT) racing disciplines. Manufacturer's Part Number: 6202CTAN42W
3T Apto Stealth StemEquipped with a tough 6061 alloy construction, this road bike stem provides a strong and secure connection between your handlebar and your fork's steerer tube. 3T has also kitted out this version with double bolts on its steerer clamp for a dependable hold with extra safety. Another highlight is its reverse faceplate bolts, which give the faceplate a more elegant design. Coming complete with a stealth black finish and the classic 3T rubber logo on the front, this is a lightweight upgrade for holding your steering set-up together as you clock up the miles.A stem may not seem to be the most exciting bike part, but it is in 3T's DNA to care about it in great detail. After all, no other part has such a big effect on your riding position and thus your speed, comfort and enjoyment. With the APTO, 60 years of innovation and elegance in 3T stem design come together in a moving sculpture.Features: Material: Alloy 6061 Finish: Stealth Use: Road Bar Clamp Diameter: 31.8mm Steerer Diameter: 1 1/8" Key Size: 4mm Allen key Steerer Bolt Torque: 5Nm Faceplate Bolt Torque: 5Nm Weight: 70mm Option: 129g; 80mm Option: 136g; 90mm Option: 141g; 100mm Option: 149g; 110mm Option: 156g; 120mm Option: 161g; 130mm Option: 169gTechnologies: Steerer Clamp: Double bolts hold the steerer securely and provide redundancy for extra safety. Reverse Faceplate Bolts: These clean up the faceplate for a more elegant design, in particular in combination with 3T's drop bars. Classic Rubber Logo: The 3D rubber logo is a nod to the iconic 3T stems of yesteryear. Bar Fly Compatible: The Apto Stealth stem is compatible with the Bar Fly Race Direct GPS mount.Manufacturer's Part Numbers: 8700DBAC95W Black 70mm 8700DBAD95W Black 80mm 8700DBAE95W Black 90mm 8700DBAF95W Black 100mm 8700DBAG95W Black 110mm 8700DBAH95W Black 120mm 8700DBAI95W Black 130mmBuy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
3T Superleggera Team HandlebarDespite its ultra-modern high-modular carbon fibre construction, the Superleggera Team Handlebar offers timeless good looks and classic round drops. The bar's traditional drop shape is favoured by pro racers and experienced traditionalists alike, as it offers smooth transitions between riding positions.Light and ComfortableShaving weight off your bike can have a significant difference to your performance on the road and as these bars weigh a mere 186g in the 42cm size, there’s nothing holding you back. Also, to ensure lasting comfort on longer rides and increased structural integrity, the centre section has a constant taper. This design improves the ergonomics for the hands in a range of different hand positions.Features: Material: High Modulus Carbon Clamp: 31.8mm Drop: 148mm Reach: 105mm Finish: Gloss black Weight: 186g (42cm)Buy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
3T Ergosum OE Team Stealth HandlebarBenefitting from a high-quality carbon construction, this drop handlebar provides a fantastic combination of stiffness, durability and low weight performance for your road bike. 3T has also kitted out this model with a unidirectional (UD) matte finish for a smooth and stylish appearance as you clock up the miles. Another highlight is this version's 128mm drop and 89mm reach, which delivers comfortable ergonomics for finding your racing position and putting the power down. Weighing in at only 195g (42cm option), this is a great choice of upgrade for road racers who want reliable steering without adding any unnecessary excess weight to their ride.Features: Material: Carbon Finish: Unidirectional (UD) Matte Use: Road Clamp Diameter: 31.8mm Drop: 128mm Reach: 89mm Weight: 195g (42cm option)Technologies: 3T created the Ergosum bend to fit the latest brake-shifter levers. The bends tight radius at the brake lever mounts makes it easy to accurately adjust the reach. Ergosum is shallower than traditional drop bars, with a little more reach.Manufacturer's Part Numbers: 4501AEAN41V Black 42cm 4501AEAM41V Black 40cm 4501AEAO41V Black 44cmBuy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fit for both experienced road runners and amateur enthusiasts alike, this triple-butted aluminium bar boasts a comfortable range of reach and drop to make riding upright or with your head down as enjoyable as can be. A 6-degree flare also allows for a more ergonomic elbow and wrist support while riding in the drops. The egg-shaped centre section on top features a full 180-degree roll through into the forward extension, letting your hands find a natural position near the brake hoods and drops, for minimal movement and easy control. A fabulous choice for the fast and focused roadster.
These bars feature a standard 22.2mm diameter, with 305mm maximum extension from centre-line of bar clamp. Giving a substantial gripping position as you streamline your spot for top speeds, these ski-bend extensions enhance your performance while providing top-level comfort.
Clip-On Kit fits 3T dropbars in the TEAM and PRO ranges, providing really rigid support for your choice of Extension. 3T Extension Bars are available separately and come in three shapes, plus, new for this year, a Christian Vande Velde Signature edition. Clip-On Kit can also be used on other brands of bar that are certified safe with clip-ons. (Note: they must not be used on any 3T LTD bar.)
3T Rotundo Team Road Handlebar - StealthRotundo is a traditional, medium-deep, round drop bend. Many new drop bar shapes have appeared in the past 30 years, but some riders still love this enduring classic pattern for its control, handling, and versatility.Rotundo Team Stealth is an outstanding blend of tradition and innovation, marrying race breeding with modern materials and fabrication, with an elegant Stealth finish in Matte Black. (Can be fitted with clip-ons.)Features:Weight: 200g (42cm)Width: 40, 42, 44cmClamp: 31.8mm ∅Material: Carbon-fiberDrop: 139mmReach: 83mmRouting: ExternalFinish: UD Matte BlackCertification: CENBuy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
3T R Discus Plus C30W Stealth Front WheelThe Discus Plus blends the aerodynamics of a top-class road wheel with the durability of a hard-wearing MTB wheel to give you a super-fast gravel racer for an advantage on the off-road. Adapting the ever-popular 650b size to a sharp 28mm-deep carbon fibre rim, this wheel offers a lightweight and versatile performance that makes it a perfect match for gravel riding.Tubeless-Ready and Disc Brake CompatibleThe wide 34mm rim allows this front wheel to roll smoothly over any loose-packed surface, and with its tubeless-ready design, you can adopt extra-wide tyres for an improved experience. Plus, the disc brake compatibility gives you the precision stopping power necessary to take sharp corners while retaining your speed advantage.Features: Material: Carbon Use: Road, Gravel Axle Size: 15x100mm Type: Clincher Rim Depth: 28mm Rim Width: 34mm (outer), 28mm (inner) Spokes: Steel, Straight-pull Spoke Count: 24 Hubs: Aluminium Brake Type: Disc Brake (Centre Lock) Single or Pair: Single Tubeless Ready: Yes End Caps Included: Yes Part Number: 3T5128CXBD41W Weight: 870g (approx)Technologies: WIDE PROFILE: Wide tyres need a wide rim to prevent excessive lateral tyre roll and improve cornering. The Discus Plus PRO TEAM wheels exploit the lightweight carbon properties with a 28mm inner width. OFFSET SPOKES: Discus Plus wheels use offset spokes to compensate for the space required for the brake rotor (and in the case of the rear wheel, the cassette). This allows the spoke angle and thus the spoke tension to be more equal left and right. EXPOSED NIPPLES: The Discus Plus wheels are designed to be bombproof. In case you encounter a tree crossing the trail or any other unlikely event requires a quick fix on the go, the Discus Plus uses exposed nipples for easy access. STRAIGHT PULL DESIGN: Straight pull spokes are stronger and lighter. They are more expensive due to the extra effort in machining the hubs, but it's well worth the investment to ensure that spoke breakage is all but eliminated. MULTI-AXLE: Our hubs are compatible with 5mm quick releases, 12mm thru axles and even with a 15mm front thru axle. Just swap out the end caps depending on the frame design you use the wheels in.Buy 3T Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
3T Superleggera Ltd Stealth HandlebarThe Superleggera Ltd Stealth Handlebar is 3T's lightest ever drop bar and despite its ultra-modern high-modular carbon fibre construction, it offers timeless good looks and classic round drops. The bar's traditional drop shape is favoured by pro racers and experienced traditionalists alike, as it offers smooth transitions between riding positions.Light and ComfortableShaving weight off your bike can have a significant difference to your performance on the road and as these bars weigh a mere 166g in the 42cm size, there’s nothing holding you back. Also, to ensure lasting comfort on longer rides and increased structural integrity, the centre section has a constant taper. This design improves the ergonomics for the hands in a range of different hand positions.Features: Material: High Modulus Carbon Clamp: 31.8mm Drop: 148mm Reach: 105mm Finish: UD matte black Weight: 166g (42cm)Buy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The traditional drop shape on the Superleggera LTD’s is favoured by both racing professionals and experienced traditionalists, as it helps the rider to smooth out their riding position changes. Comfortable and Lightweight Reducing the overall weight of your bike can have a major effect on your performance and as this bar only weighs 166g in its 42cm size, there’s nothing to hold you back. Also, to increase the structural integrity and ensure you remain comfortable on longer rides, there’s a constant taper on the centre section. This ergonomic design improves the hand comfort in all riding positions.