Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Fat Paw Cam GripsReady for off-road pursuits, this stunning duo delivers a unique cam profile which allows you to choose the position which best supports your hand position and riding style. Keeping you in control, their dual-density silicone compound provides effective vibration damping while maintaining durability. Equipped with a boisterous 9.5mm of grip thickness, these reduce hand fatigue and finger numbness which makes them an ideal choice of upgrade for riders with large or gloved hands. Features: Body Material: 100% Silicone Use: MTB Diameter: 36mm Thickness: 9.5mm Length: 135mm Profile: Cam Includes: Bar end plugs Weight: 93g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Light Action Remote Dropper LeverThis mountain bike dropper seat post lever is engineered to make operation as simple as possible on your off-road adventures. Specifically designed for use with Hope cable-actuated dropper posts, this Light Action model has a longer lever arm when compared to Wolf Tooth's standard ReMote model. As a result, the actuation force is reduced by a third and riders can enjoy a lighter and smoother feel.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. CompatibilityReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to the ReMote base. Features: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Compatibility: Hope cable actuated dropper seat postsType: Light Action remoteLever Length: 57.1mm Made in the USAWeight: 36gTechnologies: Up Front Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.Low-Profile, Light Action lever: The ReMote LA lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash.High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions.Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Light Action Dropper LeverThis remote dropper lever solves many of the common problems associated with dropper remotes thanks to its compact, ergonomic and sturdy design. It features a hard-wearing aluminium construction with a Delrin axle, making it more than capable of handling all the abuse that's associated with long days in the saddle. Its patent-pending ReMote LA has a longer lever arm than the standard ReMote and is ideal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.CompatibilityCompatible with all cable-actuated dropper posts. Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. Measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.Mounting TypesReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware. ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware. ReMote IS-II for Shimano I-Spec II - Includes IS-II hardwareFeatures: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Made in the USA Single or Pair: Single Weight: Shimano IS-AB: 36g; Shimano IS-II: 35g; Shimano IS-EV: 35gTechnologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Numbers: WTREMOTELAISAB Black Option 1 IS-AB WTREMOTELAISEV Black Option 2 IS-EV WTREMOTELAISII Black Option 3 IS-II Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura MTB Remote Clamp Conversion KitBy attaching your dropper remote to your Magura brakes, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. This model is specifically designed for use with Magura brakes.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. Features: Material: Delrin and Aluminium Compatibility: Magura brakes Part Number: WTMAGCONVKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM Matchmaker X Clamp Conversion KitThe Wolf Tooth ReMote Clamp Conversion Kit allows you to attach a Wolf Tooth ReMote Dropper Lever to a specific handlebar diameter or brake lever. This option is specifically designed for use with SRAM Matchmaker X. Perfect for riders who already own a ReMote dropper lever and want to attach it to their SRAM Matchmaker X brake lever. Genuine Wolf Tooth spare parts.Features: Compatibility: Wolf Tooth ReMote Dropper Levers and SRAM Matchmaker X Genuine Wolf Tooth spare partsManufacturer's Part Number: WTMMCONVKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth RockShox Reverb Sustain Dropper RemoteThis remote sustain is used to simplify the actuation system, accelerate return speeds, improve tactile feedback and reduce level throw for a better ride. By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility:Compatible with RockShox Reverb B Spec Stealth (internal) routing dropper posts. Not compatible with A1 spec Reverbs. Not compatible with non-Stealth (externally routed hydraulic hose). ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Features: Clamp Diameter: 22.2mm Dropper Post Compatibility: Rockshox Reverb B Spec Stealth internally routed NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) Manufacturer's Part Number: WTREMOTESUSBCLMPBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth ShiftMount MTB Brake-Shifter MountThis adaptor mount is specifically designed to enable riders to integrate their SRAM or Shimano shifters with several different brakes such as Shimano, SRAM, and Magura (select option from the menu). Designed for simple and seamless drivetrain integration, this ShiftMount adaptor lets you mount your shifter to a specific brake type. This means that you'll benefit from more handlebar space thanks to this model's clever design that easily integrates your brakes and shifters for a clean look.Features: Use: MTB Mount Type: Multiple options available to select Compatibility: Designed to work with rear (right side) brakes and shiftersManufacturer's Part Numbers: SHF-MM-IS11 Black SRAM MM - I-Spec II WTSHF22ISII Black 22.2mm I-Spec II WTSHF22ISEV Black 22.2mm I-Spec EV WTSHFISEVMM Black I-Spec EV SRAM MMBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Seatpost Remote Lever Compatible with all mechanical (cable operated) dropper seatposts and created to give your bars a clean look, this universal dropper seatpost remote lever works brings you fast, accurate and smooth control of your saddle height. Made by Wolf Tooth from a tough 6061 T6 aluminium, it’s ready for aggressive use as you drop your saddle out of the way for wild descents and raise it back up for more attacking the climbs more efficiently.Low-Profile Dropper LeverEasy to use, this tough component is kitted out with a low-profile lever that sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control that feels like a natural extension of one of your limbs. Also, to reduce the likelihood of knee contact in technical terrain sections, it offers more space around your bars to overcome challenging riding situations.Integrated Cable AdjustmentEquipped with a barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up.Features:Body Material: 6061 T6 AluminiumAxle Material: DelrinUse: Mountain Bike (MTB)Clamp Compatibility: Various options availableWeight: 38.5g (approx.)Please Note: The "Matchmaker X" and Shimano IS-EV" options are designed to combine with compatible brake levers, they do not come with their own round handlebar clamps.Technologies:UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustrationLarge Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulationCable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securingLow-Profile, Light Action lever: The ReMote LA (light action) lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internalsIntegrated Cable Adjustment: The ReMote LA’s barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjustersBreakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available hereHigh-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditionsMade in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Light Action MTB Dropper Seatpost LeverThis dropper lever is specifically engineered for use with cable-actuated dropper seatposts and it features a 6061 T6 aluminium body with a Delrin axle, making it tough and reliable as you tackle the most demanding of mountain bike (MTB) trail riding conditions. With a design that requires much less effort to operate than most remotes on the market, this model is developed as a dependable choice of upgrade from your dropper seatpost's factory-fitted lever. Wolf Tooth has kitted out this version with a longer arm and impressively light actuation, so riders can benefit from super-smooth operation as you dominate across the mountain. Suitable for use on all cable-operated droppers, it gives you the extra leverage and fine control to quickly drop your saddle for a descent or position it perfectly for a tough climb.Compact, Ergonomic and Sturdy Dropper LeverReMote LA, or Light Action, is another option in Wolf Tooth's class-leading ReMote line of dropper remotes. They solve common dropper remote complaints with the compact, ergonomic, and sturdy ReMote LA. The patent-pending ReMote LA has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote.Lightweight with Smooth Ball Bearing ActionBeginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.Compatibility:- Compatible with all cable-actuated dropper posts.- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.- If your post is not listed in the options, measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best (available separately).- ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The updated model of the Tech 3 brake has a threaded hole and will require some modifications to the ReMote base.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: MTB Not Included: Cable and housing (available separately) Made in the USA Weight: 22.2mm Clamp Option: 38g; Shimano IS-EV Option: 35g; Hope Option: 36g; Shimano IS-AB: 36g; Matchmaker X Option: 38.5g; Shimano IS-II Option: 35gTechnologies: Upfront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Numbers: WTREMOTELACLMP Black 22.2mm Clamp WTREMOTELAISEV Black Shimano IS-EV WTREMOTELAHOPE Black Hope WTREMOTELAISAB Black Shimano IS-AB WTREMOTELAMM Black Matchmaker X WTREMOTELAISII Black Shimano IS-IIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.