High profile cycling socks. The elegant, subdued design incorporates the distinctive red of the Vuelta with a touch of orange, in reference to the race start in the Netherlands.
Super aero jersey cut, constructed with stretch woven fabrics engineered to reduce drag. UV resistant and with a fresh feel on the skin, featuring thermo sealed seams and reflective tape for visibility in the dark. Great for riding fast looking flawless.
Our collaboration with Road World Champion Lizzie Deignan continues in 2021 with a special edition kit which pays homage to Lizzie’s incredible World Championship victory at the 2015 Worlds in Virginia. We wanted to celebrate her achievement but at the same time create a fun, fresh image. So we played with the iconic phrase ‘Virginia is for Lovers’, adapted as the background for the jersey design and we adopted Lizzie’s favourite colour palette of beautiful indigo blues, coral pinks and navy blues. Other details like the simple logomark on the chest and the extended text graphic we added to the back finish off her unique design. Slim fit extra breathability cycling jersey cut for women. Made of a combination of micro-mesh fabrics and featuring performance raw cut sleeves. Ideal for long hot rides. Here are a few of the secrets that we've learned over the years to keep your kit performing at its best and last longer. Wash it at 30°C / 86°F Do not use fabric conditioner Avoid the tumble drier Avoid using washing powder, favor liquid detergent Turn the garment inside out Wash similar colours together Wash straight away Do not iron
Slim fit extra breathability jersey. Made of a combination of micro-mesh fabrics and featuring performance raw cut sleeves. Ideal for long hot rides. The eighth stage of the Vuelta sees the race pass through the Spanish cycling heartland of Asturias, with the stage finishing on the summit of the Colláu Fancuaya. The clean, contemporary design of our jersey draws influence from the distinctive blue and yellow colours of the regions flag, and the iconic Victory Cross emblem synonymous with Principality of Asturias. Perfect Fit: Slim Fit And Raw-cut Sleeves Breathable And Lightweight: Made Of A Combination Of Supremely Breathable And Light Micromesh Fabrics Extra Storage: Triple Rear Pocket For Your Valuables Night Time Visibility: Reflective Details On The Back Pockets
Minimal by design, this women’s Color Block jersey is soft and breathable, hitting all the performance and aesthetic notes you need. Its lightweight construction renders it the ultimate stress-free choice for all rides carried out under the heat of the sun.
Introducing Helix, the new standard in performance footwear. Bont Cycling’s race-proven anatomic fit is now even further enhanced by a newly reimagined closure system. Experience performance and comfort without compromise like never before. Features: Durolite Strength to weight ratio's have always played an important part in Bont cycling shoe design as all materials considered and developed for products within the Bont range must comply to strict standards. Durolite has been developed and chosen for the Helix upper for its extremely durable nature and light weight. Retention System Continuous wiring spreads the load for a secure hold without localised pressure points. Cable Routing Cable routing wraps around and under the rigid carbon chassis for a wide, even anchor point. Single Boa The single Boa dial simplifies operation for quick and easy on-the-fly adjustments. Unidirectional Carbon Chassis The Helix continues with its unidirectional monocoque chassis in matt finish and is upgraded with an improved grid to assist cleat adjustment. TPU Toe Protector The toe protector not only protects the front area of the shoe from wheel rub and impact, but also houses ventilation holes for improving airflow through the shoe. Ventilation The Helix is highly ventilated with integrated air vents on the front bumper providing direct airflow into the shoe along with perforated upper and tongue to maximise breathability. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Helix is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Helix utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Padding The Helix utilises closed cell memory foam that will not retain water assisting in maintaining a lighter shoe during wet conditions as well as ensuring sweat which can begin to break down the durability of the shoe is not absorbed. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Helix Material: Unidirectional Carbon Monocoque Chassis with Durolite upper Stack Height: 3.6 mm Air Vents: Ventilation via air vents on front bumper and perforated upper Innersole: EVA thermo-moldable Sole Guards: Replaceable Padding: Memory Foam Cleat Mounting: MM grid plus grip / 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA IP1 Dual Dial Retention System with Kevlar wiring Weight: 260 grams (Size 46.5)
The Santini Mago bib shorts are a superbly comfortable, versatile set of lightweight bib shorts. Regardless of whether you’re looking to tackle big days, in glorious sunshine; or quick-evening blasts with your riding buddies, then these could well be the bibs for you. Constructed using breathable fabrics, including in the straps, these are bib shorts best suited for riding in warm conditions between 18–35°C. For the warmer months or climates, if you’re in need of a good-quality bib short, that’s not going into the extreme end of the price range, these are well-worth consideration. The Perfect Fit Available in a variety of sizes, there’s sure to be the perfect fit for you—though that fit is likely to be on the snugger, more athletic side of things. What you’re looking for in a good set of cycling bibs is that when riding you barely notice that they’re there and with the Santini Mago bib shorts, that’s exactly what you get. The silicone leg gripper keeps the end of the shorts firmly in place and the bib straps themselves are a lightweight mesh, again designed with comfort in mind. Cushioning your ride is the NAT chamois pad, which offers a NEXT gel core to encourage circulation and comfort. Santini claims this to be one of their best chamois pads. This is a multi-density pad, meaning it is able to flex to the shape of your body, without bunching up, giving you more comfort where it’s needed most. Lastly, for added convenience, the Santini Mago bibs come with two small pockets on the side of the thigh, which is handy for stuffing gels or bars, for those long adventure rides. Product Features Versatile, comfortable, and breathable Breathable Y-shaped mesh braces Patterned silicone grippers to minimise NAT chamois with NEXT gel core to keep you cool and boost circulation Two small pockets on the side of the legs Temperature range: 18-35°C Please note that the Santini branding darker than shown in product images
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
Bont Cycling Blitz, 100% carbon, heat moldable road shoe that’s ready to race. With industry leading anatomical features and a sub 235gram weight, the Blitz redefines the standards of mid level road cycling shoes. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Blitz with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Construction The carbon construction of the Blitz base has been designed to ensure maximum performance at class leading weight. In addition, the stack height of the base has been decreased to 3.6mm to further improve efficiency. Retention System Velcro forefoot strap and BOA dials have been integrated to improve retention and ease of adjustment. Ventilation The Bont Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Blitz is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Blitz utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Blitz Material: 3K Carbon Chassis with Microfiber Upper Stack Height: 3.6 mm Air Vents: Frontal area air vents and mesh panels in forefoot area Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: BOA dial and forefoot velcro strap Weight: 235 grams Color Options: White/Black, Neon Yellow/Black, Neon Pink/Black, Alpha Blue/Black Sizing Options: Standard, Stock & Wide
PBK Lightweight socks are made from a fast drying, breathable mesh, designed to keep your feet cool and dry during exertion. Features: Tall 15cm cuff Low weight Fast wicking Comfort stitching Fabric composition: 80% Polipropilene 18% Polimide 2% Elastane
PBK Lightweight socks are made from a fast drying, breathable mesh, designed to keep your feet cool and dry during exertion. Features: Tall 15cm cuff Low weight Fast wicking Comfort stitching Fabric composition: 80% Polipropilene 18% Polimide 2% Elastane