Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Pro Mountain Bike Suspension ForkThis versatile mountain bike (MTB) fork is equipped with 7000-series butted-wall aluminium legs, which allows it to deliver tremendous stiffness, strength and control on your off-road adventures. With a powerful Dorado Air spring with IVA, VTT Pro damper and Half Cartridge adjustable TPC rebound damping, it's ready for whatever the mountain has to offer. Manitou has also kitted out this version with a wide range of adjustments including three-position compression (Open, Trail, Lock) with Open Mode Adjust. This allows MTB and cross-country (XC) riders to benefit from a more rider-tuned feel that perfectly matches their style as well as the terrain conditions.VTT Pro DamperRock-solid lockout without compromise. Thanks to independent shim stacks you no longer need to lose sensitivity in your open positions to achieve a true lock-out. This means you can still crank climbs without bobbing and blast through rock gardens without shattering your forearms on the same ride.Dorado Air Spring with IVAAs the name suggests this air spring is derived from Manitou's legendary Dorado DH fork. Dorado air features a unique balancing valve that equalises pressure between the positive and negative air chambers during the air fill process. This provides the fork with a consistent feel without any flat or dead spots in the stroke. To manage the volume Manitou have included its Incremental Volume Adjust (IVA). The IVA is a self-contained volume reduction system that allows greater ramp-up change than conventional adjustment systems without the need for additional parts.Features: Leg Material: 7000-Series Butted Wall Aluminium Crown Material: Forged Aluminum, Deep Hollow Bore Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Dorado Air with IVA Compression Damping: VTT Pro Rebound Damping: Half Cartridge adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) with Open Mode Adjust, IVA position Brake Post Mount: 160mm (203mm Max)Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29")Offset: 37mm (27.5"); 44mm (27.5+/29")Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29")Travel: Multiple options available to selectE-Pac: No Weight: 1625g (27.5"); 1648g (27.5+/29")Technologies: VTT Pro Variable Terrain Tune - Adjustments: 3-Position Compression Adjust With Open Mode Adjust: When developing the VTT Pro damper Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that choke off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support without getting wollowy. This is achieved thru independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted Manitou can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain. Dorado Air: For 32mm chassis Manitou are adapting its proven Dorado Air to fit the needs of shorter travel riders. The Manitou Dorado Air spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. For R7 Manitou have tuned the volumes in each chamber to give ideal support and feel for shorter travel. Also included on the air leg is its Incremental Volume Adjust (IVA). The IVA modifies the volume in the positive air chamber with a set of self-contained spacers that dictate the fixed position of the IVA piston. This self-contained volume reduction system allows greater ramp-up change than conventional adjustment systems without the need for additional parts. Chassis: When developing the chassis of any Manitou fork the primary goal is finding the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch Manitou are able to position the arch further away from the axle. The lower tire clearance behind the fork relative to the center of the axle allows for a shorter arch which yields 13% increased stiffness compared to a conventional forward arch fork of the equivalent weight. Because of this, Manitou are able to use 32mm stanchions to save weight while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Mountain Bike Fork Dust Seal KitThis dust seal kit includes 37mm sized seals, making it ideal for replacing the old seals on your Manitou Mezzer suspension forks or for keeping as a spare in your home workshop. Genuine Manitou replacement parts for breathing new life back into your suspension forks.Features: Use: MTB Compatibility: Manitou Mezzer suspension forks Size: 37mm Genuine Manitou spare partsManufacturer's Part Number: 141-36713-K025Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DOWNHILL TRAILSLIGHT DIRT JUMPENDUROThe San Quentin is for the aggressive hardtail trail rider looking for a blend between singletrack capabilities and extended air time.
The Rift Zone is our most speed oriented MultiTrac bike, created for the rider looking for the speed and roll over capabilities of 29” wheels in a trail capable package. Long, low, and slack trail geometry is more aggressive than an XC race bike for more control at top speed, and more fun while chasing seconds.
The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down.SERIES 4 ALUMINUM FRAMEAlpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.MULTITRAC SUSPENSIONThe Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.MIXED WHEEL SIZES29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.DROPPER POST OPTIMIZEDThe modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.
Marzocchi Bomber Z2 Boost Mountain Bike ForksDesigned for fast-paced mountain bike (MTB) use, the Boost Mountain Bike Forks from Marzocchi Bomber deliver smooth and comfortable front-end suspension for your mountain bike adventures. The durable aluminium upper tube construction allows these forks to handle all the intensity as you dart from trail to trail. Built for exploring further and further, its tough build means it is perfectly capable of withstanding all the challenges that come with days out in the mountains.MTB Fork with EVOL Air SpringPrepared for the most unpredictable of mountain bike rides, this fork is equipped with an EVOL air spring. It works by increasing the negative air spring volume to specifically provide optimum small bump sensitivity. This means you'll enjoy its smooth performance during both the largest and smallest impacts, as you blast across the trails with momentum.Rail Sweep Adjust DamperDeveloped for versatility, this tough mountain bike fork is kitted out with a Rail Sweep Adjust damper. This means you'll enjoy its fully adjustable compression and rebound damping from its dynamic, shim stack design. The Marzocchi Bomber Z2 Boost Fork's mid and high-speed rebound circuit also provides greater control with superior bump recovery. As a result, the fork won't pack down during fast and deep hits as you dominate the trails with precision.Features:Material: 6000-series AluminiumUse: MTBAir Spring: EVOLDamper: Rail Sweep AdjustAxle: 15 Quick Release x 110mmWheel Size: 29"Steerer: TaperedWeight: 2.5kg (approx.)Buy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Marzocchi Bomber Z2 Boost Mountain Bike ForksDesigned for fast-paced mountain bike (MTB) use, the Boost Mountain Bike Forks from Marzocchi Bomber deliver smooth and comfortable front-end suspension for your mountain bike adventures. The durable aluminium upper tube construction allows these forks to handle all the intensity as you dart from trail to trail. Built for exploring further and further, its tough build means it is perfectly capable of withstanding all the challenges that come with days out in the mountains.MTB Fork with EVOL Air SpringPrepared for the most unpredictable of mountain bike rides, this fork is equipped with an EVOL air spring. It works by increasing the negative air spring volume to specifically provide optimum small bump sensitivity. This means you'll enjoy its smooth performance during both the largest and smallest impacts, as you blast across the trails with momentum.Rail Sweep Adjust DamperDeveloped for versatility, this tough mountain bike fork is kitted out with a Rail Sweep Adjust damper. This means you'll enjoy its fully adjustable compression and rebound damping from its dynamic, shim stack design. The Marzocchi Bomber Z2 Boost Fork's mid and high-speed rebound circuit also provides greater control with superior bump recovery. As a result, the fork won't pack down during fast and deep hits as you dominate the trails with precision.Features:Material: 6000-series AluminiumUse: MTBAir Spring: EVOLDamper: Rail Sweep AdjustAxle: 15 Quick Release x 110mmWheel Size: 29"Steerer: TaperedWeight: 2.5kg (approx.)Buy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Marzocchi Bomber Z2 Boost Mountain Bike ForksDesigned for fast-paced mountain bike (MTB) use, the Boost Mountain Bike Forks from Marzocchi Bomber deliver smooth and comfortable front-end suspension for your mountain bike adventures. The durable aluminium upper tube construction allows these forks to handle all the intensity as you dart from trail to trail. Built for exploring further and further, its tough build means it is perfectly capable of withstanding all the challenges that come with days out in the mountains.MTB Fork with EVOL Air SpringPrepared for the most unpredictable of mountain bike rides, this fork is equipped with an EVOL air spring. It works by increasing the negative air spring volume to specifically provide optimum small bump sensitivity. This means you'll enjoy its smooth performance during both the largest and smallest impacts, as you blast across the trails with momentum.Rail Sweep Adjust DamperDeveloped for versatility, this tough mountain bike fork is kitted out with a Rail Sweep Adjust damper. This means you'll enjoy its fully adjustable compression and rebound damping from its dynamic, shim stack design. The Marzocchi Bomber Z2 Boost Fork's mid and high-speed rebound circuit also provides greater control with superior bump recovery. As a result, the fork won't pack down during fast and deep hits as you dominate the trails with precision.Features:Material: 6000-series AluminiumUse: MTBAir Spring: EVOLDamper: Rail Sweep AdjustAxle: 15 Quick Release x 110mmWheel Size: 29"Steerer: TaperedWeight: 2.5kg (approx.)Buy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Marzocchi Bomber Z2 Boost Mountain Bike ForksDesigned for fast-paced mountain bike (MTB) use, the Boost Mountain Bike Forks from Marzocchi Bomber deliver smooth and comfortable front-end suspension for your mountain bike adventures. The durable aluminium upper tube construction allows these forks to handle all the intensity as you dart from trail to trail. Built for exploring further and further, its tough build means it is perfectly capable of withstanding all the challenges that come with days out in the mountains.MTB Fork with EVOL Air SpringPrepared for the most unpredictable of mountain bike rides, this fork is equipped with an EVOL air spring. It works by increasing the negative air spring volume to specifically provide optimum small bump sensitivity. This means you'll enjoy its smooth performance during both the largest and smallest impacts, as you blast across the trails with momentum.Rail Sweep Adjust DamperDeveloped for versatility, this tough mountain bike fork is kitted out with a Rail Sweep Adjust damper. This means you'll enjoy its fully adjustable compression and rebound damping from its dynamic, shim stack design. The Marzocchi Bomber Z2 Boost Fork's mid and high-speed rebound circuit also provides greater control with superior bump recovery. As a result, the fork won't pack down during fast and deep hits as you dominate the trails with precision.Features:Material: 6000-series AluminiumUse: MTBAir Spring: EVOLDamper: Rail Sweep AdjustAxle: 15 Quick Release x 110mmWheel Size: 29"Steerer: TaperedWeight: 2.5kg (approx.)Buy Marzocchi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.