Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
NOTHING IS OFF-LIMITS TO THE EMBOLDEN A TRAIL BIKE DESIGNED TO CONQUER TRICKY CLIMBS ROWDY DESCENTS AND CHUNKY ROCK GARDENS WITH CONFIDENCE. Trail Capability ALUXX-Grade Aluminum frame tubeless wheelset dropper seatpost Liv Sylvia trail saddle and a 1x drivetrain allow you to tackle new technical terrain with confidence. Flexpoint Suspension The 120mm of FlexPoint Suspension provides an effective lightweight and durable suspension system so you have increased control while riding over rooty and rocky terrain. Sizes 27.5': XS S M 29': S M L Colours Purple Ash Frame ALUXX-Grade Aluminum 120mm FlexPoint Suspension Fork Giant Crest 34 SL RCL 130mm 15x110 Shock Suntour Raidon R 185/45 custom tuned for Liv Handlebar Giant Connect Trail alloy For 27.5: XS:730mm S:750mm M:750mm For 29: S:750mm M:750mm L:780mm Grips Giant Sole-O Stem Giant Contact For 27.5: XS:40mm S:50mm M:50mm For 29: S:50mm M:50mm L:60mm Seatpost Giant Contact Switch dropper remote For 27.5: XS: 75mm travel / 30.9 x 295mm S: 100mm travel / 30.9 x 345mm M: 125mm travel / 30.9 x 395mm For 29: S: 100mm travel / 30.9 x 345mm M: 125mm travel / 30.9 x 395mm L: 125mm travel / 30.9 x 395mm Saddle Liv Sylvia Pedals Not included Shifters Shimano Deore M4100 1x10 Front Derailleur N/A Rear Derailleur Shimano Deore M5120 Brakes Shimano BR-MT420 hydraulic Shimano RT-26 rotors [F]180mm [R]160mm Brake Levers Shimano BL-MT201 Cassette Shimano Deore M4100 11x46 Chain KMC X-10 Crankset Praxis Cadet Boost 30t For 27.5: XS:165mm S:170mm M:170mm For 29: S:170mm M:170mm L:170m Bottom Bracket Praxis press fit Rims For 27.5: Giant AM 27.5 sleeve-joint rim 30mm inner width For 29: Giant AM 29 sleeve-joint rim 30mm inner width Hubs Giant Boost sealed Spokes Sapim Tyres For 27.5: [F] Maxxis Rekon 27.5x2.6 WT EXO TR tubeless [R] Maxxis Ardent Race 27.5x2.6 WT EXO TR tubeless For 29: [F/R] Maxxis Forecaster 29x2.35 WT EXO TR tubeless Extras For 27.5: Factory set up tubeless max tyre size 2.6' max chainring size 32t For 29: Factory set up tubeless max tyre size 2.4' max chainring size 32t Weight The most accurate way to determine any bike’s weight is to have your local dealer weigh it for you. Many brands strive to list the lowest possible weight but in reality weight can vary based on size finish hardware and accessories. All our bikes are designed for best-in-class weight and ride quality.
The Stumpjumper Alloy brings all-new suspension kinematics and progressive geometry into a full-alloy package that's both lightweight and extremely durable. Outfitted with a no-fuss SRAM SX 12-speed groupset the Stumpjumper Alloy is your all-access pass for trail adventure. THE TRAIL BENCHMARK — When we set out to design the all-new Stumpjumper we pursued some hefty goals. It had to excel on any kind of trail for every style of rider. To achieve that we went after serious weight reduction without sacrificing durability a stiff responsive chassis that still rides light and lively geometry that improves everyone’s riding and the best suspension kinematics we know how to design. Turns out you can have your cake and eat it too with the new Stumpjumper. THE SWEETEST 130MM OF TRAVEL YOU’LL EVER RIDE — We massaged the kinematics of the Stumpjumper suspension to bring out the very best all-round performance possible in a 130mm package. Countless hours of suspension lab development and field testing created a refined mid-travel ripper that eats big terrain like a gravity fed beast handles like a dream everywhere and climbs like it has a motor. PROGRESSIVE GEOMETRY — The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. It’s long low and slack with a short offset fork and a steeper seat tube angle. These numbers combine to make your ride more stable more carvealicious more comfortable climbing more better everywhere. With FlipChip adjustability you’re able to further fine-tune your fit ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose. RIDER-FIRST ENGINEERED™ — Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1 or a DH-fiend giant in need of the lengthy S6 you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight And by light we mean real light: 2250 grams (S-Works S-3 size with rear shock). FRAME: Alloy chassis and rear-end asymmetrical design 29 Trail Geometry horst pivot BB adjustment threaded BB 12x148mm dropouts sealed cartridge bearing pivots replaceable derailleur hanger 130mm of travel REAR SHOCK: X-Fusion 02 Pro RL Rx Trail Tune rebound adjust lockout S1:190x42.5mm S2-S6: 190x45mm FORK: RockShox 35 Silver Solo Air 44mm offset rebound adjust TurnKey lockout 15x110mm Boost™ Maxle® Lite thru-axle 140mm of travel STEM: Alloy Trail Stem 35mm bar bore HANDLEBARS: Specialized 6061 alloy 6-degree upsweep 8-degree backsweep 30mm rise 800mm width FRONT BRAKE: Tektro Gemini Comp hydraulic disc resin pad 200mm REAR BRAKE: Tektro Gemini Comp hydraulic disc resin pad 180mm REAR DERAILLEUR: SRAM SX Eagle 12-speed SHIFT LEVERS: SRAM SX Eagle trigger 12-speed CHAIN: SRAM SX Eagle 12-speed CRANKSET: SRAM SX Eagle DUB S1:165mm S2-S5: 170mm S6: 175mm CHAINRINGS: Steel 30T RIMS: 700c disc double-wall alloy sleeved 32h FRONT HUB: Alloy sealed cartridge bearings 15x110mm thru-axle 28h REAR HUB: Alloy sealed cartridge bearings 12x148mm thru-axle 28h SPOKES: Stainless 14g FRONT TYRE: Butcher GRID casing GRIPTON® compound 29x2.3' REAR TYRE: Purgatory GRID Casing GRIPTON® compound 29x2.3' SADDLE: Body Geometry Bridge Saddle steel rails SEATPOST: TranzX dropper 34.9mm XS-S: 100mm M: 120mm L/XL:150mm Travel
The SCOTT Scale 930 boasts a super light Carbon Fiber frame. FOX suspension, a Shimano 12-speed drivetrain and Syncros components combine to create a lightweight and efficient racing machine.
The SCOTT Scale 950 features an ultralight Alloy Frame. FOX suspension, a Shimano 12-speed drivetrain and Syncros components create a durable and affordable hardtail designed for world-class speed.
The Stumpjumper Alloy brings all of the new, lust-worthy features of the Stumpjumper-like new suspension kinematics and geometry-into a full-alloy package that's both lightweight and extremely durable. Top it off with a no-fuss SRAM SX 12-speed groupset and you have the perfect ride for your next trail adventure.• TRAIL-TAMING TRAVEL All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper design. With the learnings from the suspension design on the Enduro, and over 1,000 hours of field and suspension lab development, we’ve greatly improved the pedaling performance, all while creating the capable, efficient, lively feelings that you long for. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? The all-new Stumpjumper descends with complete control yet climbs with ease.• PROGRESSIVE GEOMETRY The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. Long, low, slack, a short offset fork, a steeper seat tube angle—they’re all the talk of the town because they make your ride better. With Flip Chip adjustability you’re able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose.