Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Braag, an off-road performance starts with a new alloy frame that incorporates dropped chainstays and a modern mountain bike geometry. It has also upgraded to a 1x setup with the Microshift Advent 1x9 drivetrain providing reliable shifting. Paired with a mighty 11-46 cassette, you’ll always have enough gears to get over steep inclines. Then, when it’s time to push your limits downhill, the hydraulic disc brakes will help you keep control with confidence-inspiring stopping power. To truly excel on the trail, a bike needs to be supported by components from the best brands – and the?Braag?doesn’t disappoint. The?WTB Volt saddle?has?medium thickness padding ensuring?great?comfort and performance while?its?shaping supports pedalling.?The?knobbly?profile of the?Maxxis?Ardent 2.25” tyres holds the bike firmly on the trail,?with dependable?grip around corners,?while?a ramped design?to the centre tread lowers rolling?resistance at speed.To truly excel on the trail, a bike needs to be supported by components from the best brands – and the?Braag?doesn’t disappoint.?That’s why the Voodoo design team have turned to brands loved by UK?riders to?complete the?Braag.?The?WTB Volt saddle?has?medium thickness padding ensuring?great?comfort and performance while?its?shaping supports pedalling.?The?knobbly?profile of the?Maxxis?Ardent 2.25” tyres holds the bike firmly on the trail,?with dependable?grip around corners,?while?a ramped design?to the centre tread lowers rolling?resistance at speed.Whether you’re a beginner or are used to shredding your local trails, it’s always possible to find new challenges and push yourself further – and you need a bike that’ll grow with you as you develop as a rider.The Braag won’t let you down! It’s designed to be upgraded as you improve, starting with dropper post compatibility. Dropper posts are a must for avid mountain bikers and the Braag is specially designed to fit a dropper post.At the front of the bike, the Braag benefits from a stronger 15mm thru axle that not only improves rigidity but is compatible with a wider range of forks and wheelsets – giving you plenty of options.Tubeless technology is becoming more popular than ever as it increases comfort and reduces the risk of punctures. That’s why the Braag comes with tubeless-ready rims – all you need is a pair of tubeless-ready tyres and a tubeless conversion kit to run this popular upgrade. And why wouldn’t you if it reduces the risks of punctures?
The previous Bizango model won numerous awards for its unbeatable spec and incredible ride quality. Unbelievably, the 2022 version has built on this design, raising the bar to the next level! A refined frame incorporates?dropped?chainstays, a slacker head angle, and a steeper seat angle – helping you ride with more comfort and increased control. The upgraded M5100 Shimano?Deore?1x11 drivetrain gives a premium feel and efficient performance. With a swipe of the?shifter, you can effortlessly shift across?the huge 11-51t cassette, confident there’s always another gear ready to help you conquer that hill! When it’s time to test your limits down?the trail, the Shimano MT200 hydraulic brakes will provide confidence-inspiring stopping power. With mountain biking, the challenge never ends. You can always push the limits further , and there’s always a new trail ready to be conquered – and the Bizango will be with you every step of the way. Highly adaptable, the Bizango can be easily upgraded as you hone your skills. Want a dropper seatpost? No problem! Dropper seatposts are a must-have for avid mountain bikers. The frame on the Bizango?is specifically designed to fit a dropper post and includes a cut out for?internal cable routing.The?Suntour?air fork also?provides market-leading performance, but if you want to take things to the next level, the tapered headtube is ready to?receive any premium fork.?Increasing the adaptability, the rims on the?Bizango?are tubeless ready, meaning that with a set of suitable tyres and a?conversion kit, you can run this popular upgrade. And why wouldn’t you? After all, a tubeless tyre allows you to run lower pressures for more grip and the tyre can self-heal in the event of a?puncture.
For 2022, the Horde has been upgraded with a brand-new frame design incorporating dropped chainstays and a modern cockpit. The geometry guarantees comfort while allowing you to easily move your body so you can master every berm and downhill at your local trail centre. Updated with an 10-speed drivetrain and with a large 11-46t cassette, the Horde has a broad range of gearing ensuring there’ll always be that extra gear when you need it. Then, when it comes to stopping power, the hydraulic disc brakes are reliable whatever the conditions.With the help of the Horde, you’ll quickly improve your skills and will be ready to push your limits and conquer new challenges – and the bike will be with you every step of the way. The air fork absorbs every bump and vibration as you ride and is easily adjustable, so you’ll always feel connected and in control as you hit every berm and adrenaline-inducing downhill. Combined with a tapered headtube and a new thru axle, the front of the bike is more rigid, so it’s ready to push the limits with you.To truly excel on the trail, a bike needs to be supported with components from the best brands – and the Horde doesn’t disappoint.That’s why the Voodoo design team have turned to brands loved by UK?riders to complete the bike. The?WTB Volt saddle has medium thickness padding ensuring great?comfort and performance while its shaping supports pedalling.?The knobbly profile of the Maxxis?Ardent 2.25” tyres hold the bike firmly on the trail, with dependable grip around corners, while a ramped design?to the centre tread lowers rolling resistance at speed.With the help of the Horde, you’ll quickly improve your skills and will be ready to push your limits and conquer new challenges – and the bike will be with you every step of the way.The air fork absorbs every bump and vibration as you ride and is easily adjustable, so you’ll always feel connected and in control as you hit every berm and adrenaline-inducing downhill. Combined with a tapered headtube and a new thru axle, the front of the bike is more rigid, so it’s ready to push the limits with you.Tubeless technology is becoming more popular than ever as it increases comfort and reduces the risk of punctures. That’s why the Horde comes with tubeless-ready rims – all you need is a pair of tubeless-ready tyres and a tubeless conversion kit to run this popular upgrade. And why wouldn’t you if it reduces the risks of punctures?
Wellgo LU 939 Alloy Flat Mountain Bike Pedals The Wellgo LU 939 Alloy Flat Pedals are low profile pedals made from top quality materials. Featuring a strong and durable alloy body, CrMo axle and sealed cartridge bearings; all in all, it is a strong, lightweight and durable pedal design.Features: Pedal Body Material: Alloy Axle Material: CrMo Bearings: Sealed cartridge Weight: 256g (pair) Buy Wellgo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wellgo LU 950 Alloy Flat Mountain Bike PedalsWith a lightweight alloy body and a durable, stiff CrMo axle, the Wellgo LU 950 Alloy Flat Pedals are high-quality, low-profile pedals that accept toe clips.Features: High-quality low-profile alloy body and cage CrMo axle Lightweight pedal Accepts toe clips Not recommended for use with indoor spin bikes Weight: 266g (pair)Buy Wellgo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wellgo LU 987U Flat Mountain Bike Pedals The Wellgo LU 987U Flat Pedals is a solid and reliable pedal design. Featuring 9 (replaceable) steel pins per side, sturdy CrMo axles and stylish design, they are perfect for any riding style, any terrain, in all weather conditions.Features: Pedal Body Material: Alloy Axle Material: CrMo Use: XC, All-Mountain, Trail, Freeride Bearings: Sealed cartridge Weight: 570g (pair) Buy Wellgo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Karv Cam GripsGreat for longer rides, this fantastic duo is equipped with a 6.5mm thickness which reduces hand fatigue and finger numbness. They feature a dual-density silicone compound which provides you with excellent vibration damping. This makes these grips conform to your hand for amazing comfort while maintaining durability. Coming complete with bar end plugs, these are a perfect choice of upgrade for riders who want a more ergonomic set of components with efficient padding. Features: Material: 100% Silicone Use: MTB Profile: Cam Diameter: 32mm Thickness: 6.5mm Length: 135mm Includes: Bar end plugs Weight: 56g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.