The special design allows the rear mudguard to be adjusted to fit both hard-tails and full suspension bicycles. Quick release attachments means installing and removing them takes seconds.Durable injection-moulded nylon construction,Wide profile for maximum coverage,Font and rear Quick release mounts,180g.
The FENDOR BENDOR Big gets the dirty job done. The all new attachment makes fitting without tools a breeze, to virtually every bike in just a few seconds. Universal fitWith the newly developed attachment construction, FENDOR BENDOR Big is now completely self supported and therefore possible to mount on bikes without the sideway support of the seat stays or the support of a brake bridge. You could also mount it above your caliper brake to avoid interference with the brake."...once I expect to do more wet gravel riding in the winter, it will get strapped back on the bike and left there until spring comes." Cory Benson, Bikerumor For the rough stuffIt has been developed for gravel and adventure biking but is also a great protector for CX and Mountain Bikes. With greater length and width, it's well suited for the longer wheelbase normally associated with this segment of bikes. A single midway fold still allows for convenient minimal storage but with maximum sturdiness for the rocky roads ahead.Frame protection by 3MBoth models come with upgraded frame protection stickers from 3M. A material originally developed to protect the helicopter propeller blades from the sand storms in the desert, it makes sure that no scratches will be made to your beloved bike by the FENDOR BENDOR.
The ideal choice for 27.5" and 29" MTB wheels, the RX 279er rear mudguard keeps you clear from mud and dirt even on the messiest trails. Equipped with a lightweight and ultra-durable design, this mudguard is very easy to remove and install thanks to the quick-release seatpost attachment. You can easily adjust the mudguard to your preferred angle for a more customised shield against the elements on your next ride. Made from high impact resistant plastic with a polished underside to reduce mud build-up, you can ride with confidence in the highly protective and easy to clean design. The perfect choice for mountain bike tyres up to 3" wide, the DeFender RX 279er Rear Mudguard will undoubtedly protect you from dirt splashes as you conquer the elements.
For anyone riding during the winter months a rear mudguard is a must to prevent spray and keep you clean and dry. The Defender M2 rear mudguard is suitable for MTB or road bikes as it easily adjusts to 25.4 to 34.9mm, easily fitting standard and oversized seat posts. The two-pivot arm articulates for improved tire coverage and perfect bike fit. Made from a stiff engineering grade plastic support frame that is comolded to a softer more flexible material at the trailing edge for greater durability. A highly polished underside helps prevent dirt buildup and aids in cleaning.
Topeak DeFender RX 279er Clip-On Rear MudguardThe perfect mudguard for 27.5" and 29" MTB wheels, the DeFender RX 279er Rear Mudguard expertly helps to keep you clear of splatters and stains as you navigate sloppy and sticky terrains.Lightweight and Durable Mud Protection Easy to remove and install due to its quick-release seatpost attachment, the DeFender RX 279er Rear Mudguard can be adjusted to your optimum height and angle to make sure you are covered from whatver your rear wheel throws at you. The high impact plastic construction ensures low weight is maintained, while the polished underside stops mud and dirt from building up while keeping it easy to clean. A brilliant addition to mountain bikes with tyres up to 3" wide, the DeFender RX 279er Rear Mudguard superbly lives up to its name. Features: Material: Two-tone Injected High Impact Resistant Plastic Attachment: Quick Release seatpost attachment Compatibility: MTBS with 27.5" and 29.5" wheels, up to 3" wide tyres Size: 61 x 18 x 10cm Weight: 226g Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blade Width: From 66 to 72mm Wheel Diameter: 26" Weight: 166g
Giant SpeedShield ATB Fenders feature a unique softer PP material construction to prevent cracking in extreme temperatures with UV resistance for improved durability and a proprietary bracket design for a stable fit.FeaturesUnique softer PP material helps prevent cracks in extreme temperatures,UV resistance for increased durability,Proprietary bracket design helps keep fender stable on the bike,Fits most downtubes,.SizesOne size - fits most downtubes,.
It's a dirty job but Fendor Bendor Big gets the job done! Maximum protection for gravel or MTB. Key Features: Easy to mount, no tools required ,Perfect for Gravel or MTB,Super lightweight, only 61 grams,Longlasting, durable materials,Suitable for tire widths between 32-55 mm,.FENDOR BENDOR Big is ideal for bikepacking. Strong enough to handle really muddy conditions but flexible enough to not break while being bashed around. The width is optimized for tire sizes commonly used by gravel cyclists. Mounted close to the rear tire it will protect your saddle bag as well as the rider from road muck and water. It attaches to virtually any bike in seconds, without the use of tools.Most bikepacking gear is not 100% waterproof and a good set of fenders can save you from the misery of having a wet sleeping bag or clothes at the end of the day. Even if your gear is fully waterproof, you will appreciate the lack of mud on your bags when you stop to get a jacket out or when you bring them into the tent after a rough day in the saddle. The full kit adds less than 85 grams to your total weight, making it ideal for ultralight bikepacking. Specification: Measures: 555x80 mm (effective), Weight: 61 g , Material: 1 mm PP (Polypropylene),. Fit: The Fendor Bendor fits all frames with standard seat stays. It's self supportive and doesn't require support from the brake bridge or the seat stays. It can also be mounted directly on a seat post (as low as possible for best effect). The Fendor Bendor will not fit if you have monostay frame or center pull brake. Prefold: The scoring lines along the fender need to be folded hard in order to give the it the necessary rigidity and strength. Take extra care to fold down the outer edges to make sure your Fendor Bendor is functioning properly. Frame Protection: Each Fendor Bendor is delivered with a small set of transparent 3M polyurethane protection stickers. Use these to prootect your seat stays from scratches from the fender. Storage: The Fendor Bendor Big can be folded in half for easy storage in a backpack or strapped on your bikepacking gear.
Mudguard for further Brompton customisation. Use existing stays and attachments or purchase separately.
HIGHTREK SET – quickly mounted without tools! Following a design update the HIGHTREK clip-on mudguard set impresses with its sporty look. The mudguard set is particularly suited for trekking or city bikes with 26″ to 28″/700c tyres and can be installed with seat tube diameters of 28 to 32 mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools. Key Facts: Tool-free installation With universal fastener Sporty design For trekking or city bikes with 26″ to 28″ tyres Weight: 300g (inc. fitting kit) Max tyre width: 54mm length front fender: 560mm length rear fender: 700mm
Removable front mudguard, can be fitted easily, fits nearly all suspension forks using the supplied adapters, which will accommodate steerer tubes with an inner diameter of 18-30mm as well as tapered steerers, optimized for 26" bikes, suitable also for several 28" bikes with suspension forks, high quality scratch safe decal, matt-shiny surface finishRemovable front mudguard,Can be fitted easily,Fits nearly all suspension forks using the supplied adapters,Which will accommodate steerer tubes with an inner diameter of 18-30 mm as well as tapered steerers,Optimized for 26 inch bikes,Suitable also for several 28 inch bikes with suspension forks,High quality scratch safe decal,Matt-shiny surface finish.
The innovative removable rear mudguard has a micro adjust strap and is easily fitted without tools. Fits all seat post diameters or can be mounted to the frame below the seatpost quick release. Two joints are supplied, adaptable to different frame types. Rubberized sections prevent twisting. The very slim CUBE design and the mixed matte and glossy finsh with high quality scratch safe decal fits many bikes perfectly. Optimized for 26" bikes, suitable also for several 28" bikes.Removable rear mudguard,Micro adjust strap,Easily fitted without tools,Fits all seat post diameters or can be mounted to the frame below the seatpost quick release,Two joints are supplied,Adaptable to different frame types,Rubberized sections prevent twisting,High quality,Scratch safe decal,Matt-shiny surface finish,Optimized for 26 inch bikes,Suitable also for several 28 inch bikes..