The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningAvailable in a huge range of axle and rotor fitments to suit almost any disc brake bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningAvailable in a huge range of axle and rotor fitments to suit almost any disc brake bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningAvailable in a huge range of axle and rotor fitments to suit almost any disc brake bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningAvailable in a huge range of axle and rotor fitments to suit almost any disc brake bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather! The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningStraight pull spoke design builds into a lighter, stiff wheel with stronger spokesAvailable in a range of fitments to suit almost any bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather!The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningStraight pull spoke design builds into a lighter, stiff wheel with stronger spokesAvailable in a range of fitments to suit almost any bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather!The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
In 1994 DT Swiss launched the original Hügi ratchet rear hub, a marvel of Swiss precision engineering that set new standards for reliability and quality in the industryDT's twin-ratchet 240 is now an established gold standard for lightweight and reliable rear hubs but time doesn't stand still and with 25 years of research, development and production experience behind them, it was time for DT Swiss's engineers to look again at the technology DT pioneered so many years agoThe result is the new generation of 240 hubs with Ratchet EXP, an even more refined and evolved ratchet system, by moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance,The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability, truly the finest hubs DT have ever made,The extensively machined hub shell, axle and end caps contribute to make these the lightest 240 hubs yet with no reduction in performance or long term durability,As with previous generations, the Ratchet EXP system is designed around a No-Tool system making servicing simple, further aided by new easy to remove, machined end caps,Custom made DT steel bearings offer the same near legendary long term durability and ease of replacement that the 240 has always been known for,Weights start at just 294 grams a pair.