Shimano GRX RS470 Centre Lock Gravel Disc HubAn excellent addition to your hard-riding rear wheel, this RS470 hub by Shimano gives a strong and supportive performance on every off-road outing. Constructed from a durable aluminium, it stays strong and solid to withstand the bumps and bangs of rowdy mountain riding. Fit for use with E-Thru axles, it uses its high-quality contact seals and cup and cone bearings to keep your back wheel spinning with ultimate smoothness. Robust and Dependable, Aluminium-Made Front MTB Hub Giving a firm hold to your wheel's 32 J-bend spokes, this superb Shimano model also features an 11-speed Shimano-compatible freehub to send you up and over the most demanding routes with ease. Optimised for use with Centerlock disc brake systems, this modern MTB hub is an excellent choice for taking on rough and rugged off-road routes. Features Body Material: Aluminium Axle Type: E-Thru Bearings: Cup and Cone Seal: Contact Freehub: Shimano 11-speed Brake Standard: Centerlock Disc BrakeBuy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XT M8110 12sp MTB Disc Rear HubMade to give a supportive and steady performance as you blast from trail to trail, this excellent XT M8110 rear hub works hard to provide your back wheel with minimal friction and maximum strength. Built using an anodised aluminium to meet the demands of modern mountain riding, this superb Shimano model comes equipped with high-quality labyrinth and contact sealings, to make sure every spin of your wheel is buttery smooth.Durably Constructed, High-Performance Rear MTB HubKitted out with 32 spoke holes, the hub gives a hardy hold to your wheel's spokes, stiffening and strengthening the structure for a long-lasting performance. It also comes with a Shimano 12-speed freehub for added power and pace when taking on challenging climbs and sprints, while the Centerlock disc brake-optimisation allows for reliable stopping, no matter the under-wheel conditions. This Shimano rear hub is a brilliant addition to any rowdy riding back wheel. Features: Freehub: Shimano Micro Spline 12 Speed Speed: 12-Speed Spoke Holes: 32 Hole Axle Sizing: 12x148mm (Boost), 12mm x 142mm (Non Boost) Disc Brake Standard: CenterLock Weight: 305g (approx) Material: Aluminium, anodisedBuy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SLX M7110 Front Mountain Bike Disc HubSturdily-constructed to keep your front end supported and spinning smoothly, this fantastic front hub by Shimano is well-equipped to carry you across the mountain with confidence. Built from a durable and dependable aluminium, the SLX M7110 model features a cone bearing with stainless steel balls to ensure every rotation is as frictionless and consistent as can be. Robust and Reliable, Aluminium-Made Front MTB Hub As well as helping your wheel roll as easily as possible, this hard-wearing hub also maintains the structural integrity of your build by giving a tight and taught pull on your J-bend spokes. This setup lets you get maximum enjoyment from your enduro exertions, as the hub stiffens your wheel for unmatched responsiveness on testing trails. Centerlock disc brake-compatibility rounds out this superb Shimano wheel hub. Features Body Material: Aluminium Axle Material: Steel Bearings: Cone bearing with Stainless Steel balls Seal: Labyrinth rubber Brake Standard: Centerlock Disc Brake Weight: 142gBuy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Cassette & Centre Lock - Lockring ToolThis Cassette & Centre Lock - Lockring Tool is for removing and installing Shimano and SRAM cassettes on road or mountain bike rear wheels. As this lockring design is also used on CentreLock brake rotors, it can be used to remove and install these too.Features: Fits CentreLock Disc rotors and HG cassettes Large internal diameter will fit over all axle locknuts Complete with an integral spigot for stability during use Manufacturer Code: TLLR15A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Cassette & C-Lock Lockring ToolA workshop essential from Shimano, this Cassette & C-Lock Lockring Tool can be used to remove and tighten lockrings without any hassle. Features:Suitable for use with Centre-Lock Disc rotors and Hyperglide (HG) cassettesLarge internal diameter that can fit over axle locknutsCan be used with 1/2-inch drive torque wrench or ratchet driverA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XT BR-T780 Brake Blocks (M70CT4)The XT-Level BR-T780 Brake Blocks will ensure you get reliable performance from your Shimano V-Brakes. Ideal for mountain bike (MTB) and hybrid bike use in all weather types, they bring you the perfect mix of hardness for durability and high stopping power even in the wet.Suitable for MTB V-Brakes and with machined rims, these brake pads have an "above average" stopping power rating.Features: Genuine Shimano replacement parts Pack of two pads (for one V-Brake caliper) Manufacturer's Part Number: Y8K398010 Compatibility: BR-M770 BR-M600 BR-M432 BR-M420 BR-T4010 BR-T780 BR-M760 BR-M580 BR-M431 BR-M330 BR-T4000 BR-M750 BR-M570 BR-M430 BR-T670 BR-T300 BR-M739 BR-M530 BR-M422 BR-T660 BR-MX70 BR-M737 BR-M510 BR-M421 BR-T610 BR-MC18 A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Ultegra BR-6810 R55C4 Brake BlocksIdeal as a replacement or an upgrade from your factory fitted pads, the durable R55C4 Brake Blocks are suitable with a range of Shimano Ultegra and 105 road bike brake calipers. Designed for use with alloy braking surfaces, they perform reliably in even the wettest riding conditions.Features:Compatiblity: Shimano Ultegra BR-6810, 105 BR-5810, 105 BR-5710Pair of pads (for one brake caliper)Suitable for front or rear useGenuine Shimano replacement partsA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Ultegra BR-6800 Brake Blocks (R55C4)The ideal replacements for use in your Ultegra 6800 caliper brakes, the efficient and hard wearing R55C4 pads deliver consistent braking power, even in the wettest conditions. Designed for use with alloy braking surfaces, these pads are also compatible with a wide range of Shimano 105 and Dura-Ace calipers, direct-mount calipers and many Shimano cantilever brakes too.Features:Pack of two pads (for one brake)Suits standard calipers, direct-mount calipers and cantilever brakesFor alloy braking surfacesAlso suits Shimano 105 and Dura-Ace brakesGenuine Shimano replacement partsManufacturer's Part Number: Y8L298060Compatibility: BR-6800, BR-6700, BR-6600, BR-6500, BR-5800, BR-5700, BR-5600, BR-5501, BR-5500, BR-R650, BR-R600, BR-R561, BR-R560.A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano M600 One Piece Brake BlocksThe ideal replacement for your Shimano V-brake, the Shimano M600 One Piece Brake Blocks are suitable for use with Shimano's M-System. What's more, they are calibrated for a seamless installation and unrivalled performance. Features:Calibrated post for easy installationCompatibility: V-BrakeA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Centre Lock Adaptor (SM-RTAD05)A simple and effective adaptor from Shimano, this kit enables you to use your 6 bolt brake rotors on hubs that use the Centre-Lock type mount.Reasons to Buy: Simple and effective. Designed for ease of use.Quick installation.Features: Easy to use Speeds up brake rotor changes Uses the proven cassette Centre-Lock lockring fixing system for quick and easy installation Sold individually Included: Mount adaptor, spacer, lockring and mounting boltsA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SLX RT70 M7000 Centre Lock Disc RotorThe Shimano RT70 disc rotor is a replacement disc brake rotor with centre lock mounting. With Ice-Tech technology to give optimum braking performance this rotor is quick and easy to fit and is compatible with both Resin and Metal disc pads.Optional Ice-Tech brake pads with aluminium cooling fins can reduce the brake pad surface temperature by another 50 degrees. The result is high stopping power and practically no signs of fading. They also feature an updated design with refined shaping over the RT68 rotor.Features: SM-RT70 Ice Tech rotors give excellent performance using the proven Shimano Centre-Lock system providing excellent rigidity and security with an easy set-up The clad steel/alloy/steel rotor construction allows heat generated from braking to radiate quickly through the aluminium core achieving surface temperature drops of around 50° when used with Ice Tech pads surface temperatures can drop from around 400 to 300°, this provides great improvements in performance all round Refined shaping design over RT68 Ice Tech rotors achieve long pad life, less noise and less fade due to improved heat dispersion Rotor contact surface has been developed for excellent pad clearing and cooling which increases pad performance and life Precision cut stainless steel braking surface improves pad clearing in muddy conditions while aiding cooling under high load Rotor contact surface has been developed for excellent pad clearing and cooling which increases pad performance and life Alloy spider supports rotor surface, increasing rigidity and reducing weight Comes complete with steel lockring Mount Type: Centrelock Series: SLX M7000 Pad Compatibility: Resin or Metal Part No. SM-RT70 Brake Compatibility: Shimano mechanical and hydraulic disc brakes Weight: 133g (160mm), 159g (180mm), 193g (203mm)Please Note: Centrelock Disc not compatible with IS2000 disc rotor mount (6-hole system)Please Also Note: The 180/203mm disc requires a special brake caliper mount adapter for most frames/forks. Please do not exceed the disc specifications of your forks/frame.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products)Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SLX RT70 M7000 Centre Lock Disc RotorThe Shimano RT70 disc rotor is a replacement disc brake rotor with centre lock mounting. With Ice-Tech technology to give optimum braking performance this rotor is quick and easy to fit and is compatible with both Resin and Metal disc pads.Optional Ice-Tech brake pads with aluminium cooling fins can reduce the brake pad surface temperature by another 50 degrees. The result is high stopping power and practically no signs of fading. They also feature an updated design with refined shaping over the RT68 rotor.Features: SM-RT70 Ice Tech rotors give excellent performance using the proven Shimano Centre-Lock system providing excellent rigidity and security with an easy set-up The clad steel/alloy/steel rotor construction allows heat generated from braking to radiate quickly through the aluminium core achieving surface temperature drops of around 50° when used with Ice Tech pads surface temperatures can drop from around 400 to 300°, this provides great improvements in performance all round Refined shaping design over RT68 Ice Tech rotors achieve long pad life, less noise and less fade due to improved heat dispersion Rotor contact surface has been developed for excellent pad clearing and cooling which increases pad performance and life Precision cut stainless steel braking surface improves pad clearing in muddy conditions while aiding cooling under high load Rotor contact surface has been developed for excellent pad clearing and cooling which increases pad performance and life Alloy spider supports rotor surface, increasing rigidity and reducing weight Comes complete with steel lockring Mount Type: Centrelock Series: SLX M7000 Pad Compatibility: Resin or Metal Part No. SM-RT70 Brake Compatibility: Shimano mechanical and hydraulic disc brakes Weight: 133g (160mm), 159g (180mm), 193g (203mm)Please Note: Centrelock Disc not compatible with IS2000 disc rotor mount (6-hole system)Please Also Note: The 180/203mm disc requires a special brake caliper mount adapter for most frames/forks. Please do not exceed the disc specifications of your forks/frame.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products)Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.