Part of a comprehensive range of freewheel and bottom bracket removal toolsOversized centre hole and thin wall design allows use without removal of cones and locknutsInvestment cast and heat-treated for strength and durabilityOne-inch base fits end of SR-1 FRW-1 Park tools or simply an adjustable wrench or bench viceHigh strength tool steelFits 12-tooth internally-splined Record Chorus and Athena cartridge bottom brackets and Campagnolo cassette hub lockringsCompatible with 11-speed lockringsMade in the USA and covered by Park Tool's legendary limited lifetime warranty
The BBT-5 / FR-11 may have a name that sounds like it is straight out of a sci-fi film but it is really a rather simple, yet essential piece of workshop equipment for anyone that owns Campagnolo components. Fitting 12-tooth internally splined Record, Chorus and Athena cartridge bottom brackets and Campagnolo cassette hub lockrings (including 11-speed lockrings) the BBT-5 / FR-11 is a dual purpose piece of kit. The oversized centre hole and thin wall design allows use without removal of cones and locknuts, saving precious riding time. The one-inch base fits the end of the Park SR-1 and FRW-1 tools or simply an adjustable wrench or bench vice.
Park Tool Bottom Bracket Lockring Wrench HCW-5Double sided bottom bracket lockring hook spanner. One side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings. The three-hook end will fit 3-notch lockrings with a maximum outside diameter of 46mm, and minor diameter (in the notches) of 40mm.NOTE: The HCW-5 is designed for bottom bracket lockrings. For fixed gear lockring, use the HCW-17.Buy Park Tool BB Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
One side is a single lockring hook spanner, the other is a hook spanner with 3 notches for better engagement in the lockrings. Park's popular and versatile Crank Wrenches feature their proven "Y" head design, which offers a secure and simple fit.
The Park Tool BT2 , commonly referred to as a 4th hand . The Park Tool Cable Stretcher pulls cables tight to leave your other hand free. It features one-hand operation with a thumb lock system to hold the cable tight while your hand is removed to tighten pull-up bolts and nuts. Made from heat treated steel, chrome plated, and featuring cushion grips for comfort. An invaluable tool, and once you've used one you'll understand just how useful it is and a must for any shop, home or professional.
Also known as a Fourth hand, this tool speeds up work on brake and gear cablesOne hand operation to tighten cables, with a thumb lock to hold the setting, leaving your hands free to tighten nuts and boltsHeat treated steel, with a chrome plated finishCushion handle grips for comfortAn invaluable tool, and once you've used one you'll understand just how useful it is
Heat treated alloy tool steel, one inch base fits wrench or bench vise. The FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.Cassette Lockring Tool with 12mm Guide Pin:Utilizes a 12mm guide pin to stabilize the tool in use,Fits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others (23.5mm diameter),Fits some Shimano® and similar disc brake rotor lockring,.Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.Cassette Lockring Tool with 5mm Guide Pin:Fits Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and other cassette lockrings,Also fits some Shimano® disc brake lockrings,Guide pin stabilizes tool.
Park Tool Cassette Lockring Tool FR-5.2Enjoy quick and simple removal and installation of cassette lockrings with this handy tool from Park Tool. Designed to be hassle-free, this lockring tool is suitable for use with a variety of cassette lockrings, making it a versatile essential for any cycle workshop.Easy and Efficient Lockring RemovalDurably built from heat-treated alloy tool steel, for daily garage and workshop use, the Park Tool Cassette Lockring Tool FR-5.2 has a thin wall construction, with 12 splines for accurate engagement with similarly splined lockrings. Specially designed to make the job easy, there is no need to remove cones and locknuts when using this fantastic bit of kit.Sized perfectly to be used with a lockring wrench or bench vice for extra leverage, the tool is compatible with a range of cassette lockrings including Shimano, SRAM, and Chris King, and some Shimano disc brake lockrings. With the Park Tool Cassette Lockring Tool FR-5.2 in your toolbox, you will never be short of work. Features: Material: Heat Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King, and other cassette lockrings + some Shimano disc brake lockrings Size: 1" base with 12 splines (approximately 23.4mm across), 12mm centre bore for axle clearance Note for Usage: Hold the tool in place with a quick-release skewer and have it snug to cogs when loosening. Use the axle nut for solid axles.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of a comprehensive range of freewheel and bottom bracket removal tools, the Park Tool cassette lockring tool has a one-inch base that easily fits a wrench or a bench vice. Thin Oversized centre hole and thin wall design allows use without removal of cones and locknuts Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation.
Made from a heat-treated alloy, the Park Tool cassette tool FR-5.2 allows for the removal of cones and locknuts. It has 12 splines that are approximately 23.4mm across, the one-inch base allows it to be used with a wench or a bench vice. Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation. The Park Tool FR-5.2 is designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings. It can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Thin wall construction allows use without the removal of cones and locknuts.
Park Tool Cassette Lockring Tool FR-5.2GReplace and install your Shimano and SRAM lockrings with ease thanks to this Cassette Lockring Tool from Park Tool.Versatile and Easy Lockring RemovalDesigned to help remove most common 12-spline cassette lockrings, this handy device will work with hollow quick-release axles, using its 5mm guide pin to stabilise the tool while in use. The FR-5.2G ensures proper fit and solid engagement with any lockring, while its thin-wall construction allows you to remove them without having to take out any cones or locknuts from the hubs. A great effort-saving addition to any toolbox, the Cassette Lockring Tool FR-5.2G will get your cassettes off and on in no time.Features: Material: Heat-Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x) SunRace, SunTour, Chris King, some Shimano disc brake lockrings and other 12-spline lockringsSize: 1" base, 12 splines approximately 23.4mm acrossBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
A great effort-saving addition to any toolbox, the Park Tool cassette tool FR-5.2G will get your cassettes off and on in no time. It ensures proper fit and solid engagement with any lockring, while its thin-wall construction allows you to remove them without having to take out any cones or locknuts from the hubs. Designed to help remove the most common 12-spline cassette lockrings, the handy Park Tool FR 5.2g will work with hollow quick-release axles, using its 5mm guide pin to stabilize the tool while in use.