PVC Bike cover, light weight and ideal for protecting your bike from the elemets
The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
The Stash is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac. Each BikeParka has an elasticated bottom for close fit around the wheels and eyelets for ties or small locks. The cover can be tweaked to suit any seat and handle bar height. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
A super-sized cover for mountain bikes and those with wider handlebars or child seats. Same Ripstop fabric, same tough protection against the cold and wet.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Stash Bike CoverKeep your bike sheltered from the outside elements with the Stash Bike Cover BikeParka. Ideal for use both indoors and outdoors, it securely fixes to your bike and when not in use can be stored away in the Stuff Sac.Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars, and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Polyester Ripstop.Fully Seam Sealed.PU Coated.UPF50+Toggle AdjustableEyelets for a LockLight & BreathableStuff Sac Dimensions: 20cm x 12cmDimensions: 220cm x 140cm (L x H) and will fit handlebars up to 65cmBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Stash Bike CoverKeep your bike sheltered from the outside elements with the Stash Bike Cover BikeParka. Ideal for use both indoors and outdoors, it securely fixes to your bike and when not in use can be stored away in the Stuff Sac.Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars, and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Polyester Ripstop.Fully Seam Sealed.PU Coated.UPF50+Toggle AdjustableEyelets for a LockLight & BreathableStuff Sac Dimensions: 20cm x 12cmDimensions: 220cm x 140cm (L x H) and will fit handlebars up to 65cmBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Stash Bike CoverKeep your bike sheltered from the outside elements with the Stash Bike Cover BikeParka. Ideal for use both indoors and outdoors, it securely fixes to your bike and when not in use can be stored away in the Stuff Sac.Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars, and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Polyester Ripstop.Fully Seam Sealed.PU Coated.UPF50+Toggle AdjustableEyelets for a LockLight & BreathableStuff Sac Dimensions: 20cm x 12cmDimensions: 220cm x 140cm (L x H) and will fit handlebars up to 65cmBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.