Replacement bearings for the Federal Stance front hub.
With the Federal freecoaster being so popular and riders wanting to match their front and rear hubs it made perfect sense to offer a Federal front hub with built in hubguards. High density nylon guards with knurled cone nuts. Cone nuts designed to follow the contour of the hub so it looks good if you’re running the hub with or without guards. Slimline profile to compliment the shape of the Federal freecoaster. Laser etched Federal logo. ###section### Product Specs AXLE SIZE: Female SPOKE HOLES: 36H BEARINGS: Sealed WEIGHT: 303g / 10.7oz
Replacement press fit plastic hub guards for Federal stance front cone spacers.
Pre-built BMX wheel from Federal using their stance front hub laced with double butted spokes into a stance XL rim . Come with guards ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Stance AXLE: Female RIM: Federal Stance XL SPOKES: Butted NIPPLES: Brass WEIGHT: 1009g
Following on from the success of the Federal freecoaster they felt the time was right to introduce their own cassette hub. The new Federal cassette hub is available as a male 14mm option or as a female axle version that uses a hollow 17mm axle and 14mm bolts that are much stronger than the regular 14mm axle. Both hubs have been designed so that all the hardware is interchangeable, so you can convert a female hub to a Male and vice versa simply by swapping the axles ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:TBC
Following on from the success of the Federal freecoaster they felt the time was right to introduce their own cassette hub. The new Federal cassette hub is available as a male 14mm option or as a female axle version that uses a hollow 17mm axle and 14mm bolts that are much stronger than the regular 14mm axle. Both hubs have been designed so that all the hardware is interchangeable, so you can convert a female hub to a Male and vice versa simply by swapping the axles ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:TBC
The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Left Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
Hand Built right here at Source by BMXers! This Custom Front Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around Federal’s Stance Pro hub which features oversized bearings and flanges for better durability on the streets. The hub also comes with 2 plastic hub guards and has female 10mm bolts. laced into the Odyssey Quadrant rim for a super reliable front wheel.
Federal's Stance Pro Cassette Hub has been designed tofollow on from the Stance hub. Featuring an upgraded CNC machined 6061-T6 Aluminium Alloy shell with taller and narrower flanges for a more robust and stiffer wheel, upgraded oversized bearings, knurled collars and high density push-fit Nylon guards. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm DRIVER:9T SPOKE HOLES:36 WEIGHT:TBC
Federal Stance Pro Cassette Hub laced to the Federal Stance XL Rim. Federal's Stance Pro Cassette Hub has been designed to follow on from the Stance hub. Featuring an upgraded CNC machined 6061-T6 Aluminium Alloy shell with taller and narrower flanges for a more robust and stiffer wheel, upgraded oversized bearings, knurled collars and high density push-fit Nylon guards. The Federal Stance XL rim has a wider (40mm) cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% to reduce the possibility of spokes pulling through the rim. We have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance .The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Stance Pro Cassette Hub AXLE: 14mm DRIVE SIDE: Left Side Drive RIM: Federal Stance XL Rim SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
These hubs are based around the previous top selling stance hub but now feature oversized bearings and taller flanges which help to create a more robust and stiffer wheel. Supplied with hub guards. ###section### Product Specs AXLE SIZE: 10mm SPOKE HOLES: 36 BEARINGS: Sealed WEIGHT: TBC